Question 4 A water pipe having a 2.77 cm inside diameter cames water into the basement...
Please show your work and be clear a) speed vf ? b) water pressure pf at the second floor? A water pipe having an inner diameter of di-250mc house at a speed v,- 0.90 m/s and a pressure pi -170k?a. cm carries water into the basement of:a 170 kPa. If the pipe tapers to a final inner diameter d, - 1.2 cm whi height 7.6 m above the input point, what are the: 1,000. kg/m' _12 cm while rising to...
A pump circulates water through a system of connected pipes on a house from the basement to the top floor. The pump is located in the basement and drives water at 3.93m/s through a 6.99 cm diameter pipe at a gauge pressure of 425000 Pa. What will be the pressure (in kPa) in a 3.19 cm diameter pipe on the top floor, 21.6 m above the pipe? Please show work!
2 A pipe carrying water narrows 1 from a dizameter dy9.6 cm to a diameter d24.8 cm as it: rises h1.0 m. Ai position 1 the gauge pressure is P1-1674 kPa and the speed is 2.8 m/s. Calculate the gauge pressure P2 at position 2 in units of kPa. Round your answer to the nearest whole number. Density of water is 1000 kg/m3.
Water circulates throughout a house in a hot water heating system. If the water is pumped at a speed of 0.5 -- through a 2 cm diameter pipe in the basement under a pressure of 3 atm, what will be the flow speed and pressure in a 1.3 cm diameter pipe on the second floor 5 m S above?
10. A cylindrical water tower of diameter 3.0 m supplies water to a house. The level of water in the water tower is 40 m above the point where the water enters the house through a pipe that has an inside diameter 5.1cm. The intake pipe delivers water at a maximum rate of 2.0 x10-3 m3/s. The pipe is connected to a narrower pipe leading to the second floor that has an inside diameter 2.5 cm. What is the pressure...
20. A cylindrical water tower of diameter 3.0 m supplies water to a house. The level of water in the water tower is 35 m above the point where the water enters the house through a pipe that has an inside diameter 5.0 cm. The pressure at the top of the water tower is I ATM and the water in the cylindrical tank flows slowly at a speed of 0.01 cm/s. At what speed does the water flow in the...
Water is flowing through a horizontal pipe with an inside diameter of 8.00cm. The pipe narrows to an inside diameter of 3.75cm. Assume the water is an ideal incompressible fluid. What is the velocity of the fluid initially, v_1 (when It is flowing in the 8.00cm diameter section) if the velocity of the water in the narrow part of the pipe is measured at V_2 = 27m/s? If the initial pressure is known to be 670 kPa what is the...
A 2.5 cm diameter PVC water pipe brings city water into a home at a speed of 0.038 m/s. The city water pipe is 45 cm below ground and the water outlet outside the house is 0.80 meters above ground. The exit velocity from the hose is 0.12 m/s exiting from a 2.5 cm diameter circular nozzle. What is city water pressure?
Water at a gauge pressure of P = 4.2 atm at street level flows into an office building at a speed of 0.78 m/s through a pipe 5.2 cm in diameter. The pipe tapers down to 2.2 cm in diameter by the top floor, 16 m above. Calculate the flow velocity in the pipe on the top floor. Calculate the gauge pressure in the pipe on the top floor.
Water entering a house flows with a speed of 0.25 m/s through a pipe of 1.1 cm inside radius. What is the speed of the water at a point where the pipe tapers to a radius of 2.3 mm? __________m/s