A 4 ? cube of Arista containing 2.8 ? of water height and 0.5 ? of...
A 4 ? cube of Arista containing 2.8 ? of water height and 0.5 ? of oil height (?? = 0.84), moves horizontally to the right with an acceleration of 6.13 ? / ?2.
a) Determine the volume spilled (in ?3)
b) Calculate the horizontal force (in ??) on the left wall and on the right wall.
Homework Answers
Add Answer to:
A 4 ? cube of Arista containing 2.8 ? of water height and 0.5 ?
of...
Problem 4: A 4 m-wide tank with height of 1.8 m filled with water is pulled...
Problem 4: A 4 m-wide tank with height of 1.8 m filled with water is pulled with a cable inclined at 30° to the horizontal. The constant acceleration value in the cable direction is 4 m/s. The water depth is measured as 1.5 m before the motion starts. • Determine the angle between the water surface and the horizontal. • Compute the maximum and minimum pressure values on the bottom of the tank. • How many volume of water are...
the extra question i cant get 3. A concrete cube, 0.5 meters on each side, is...
the extra question i cant get
3. A concrete cube, 0.5 meters on each side, is lowered beneath the surface of Seneca Lake. At what depth is the water around it exerting an inward force of 1.7x10 newtons on each face of the cube? 69.4m 4. A 0.5 kg block is attached to a spring and oscillates on a horizontal frictionless surface in the usual way with an amplitude of 0.085 meters. The spring constant is 125 N/m and the...
2. A cube and a wedge with masses m1-5.00 kg and m2 10.0 kg are arranged...
2. A cube and a wedge with masses m1-5.00 kg and m2 10.0 kg are arranged as shown to the right. 9 There is no friction between the masses and there is no friction between the wedge and the floor. The masses are released from rest and the wedge moves to the left while the cube moves to the right. The masses only move up/down and left/right. They do not move into or out of the page. After release, the...
QULIOL DI LUMILLI ILJ Oil 28% 10 cm (a) A cube of side length 10.0 cm...
QULIOL DI LUMILLI ILJ Oil 28% 10 cm (a) A cube of side length 10.0 cm and made of an unknown materials floats at the interface between water and oil. The oil has a density of 810 kgm . Cube floats so that it is 72% in the water and 28% in the oil. Calculate the mass of the cube and the buoyant force on the cube. 72% Water 10 cm A firehose with a diameter of 70 mm is...
Calculate the surface-to-volume ratio of the following cubes: Cube 1: length, width, and height: 5 mm...
Calculate the surface-to-volume ratio of the following cubes: Cube 1: length, width, and height: 5 mm Cube 2: length, width, and height: 3 mm a. What were the surface-to-volume ratios for Cubes 1 and 2? (2 points) b. Which cube would be more efficient as a cell? (1 point)
A cylindrical water tank has a radius of 2.8 feet and a height of 5.6 feet
A cylindrical water tank has a radius of 2.8 feet and a height of 5.6 feet. The water tank is filled to the top. If water can be pumped out at a rate o f36 cubic feet per minute, about how long will it take to empty the water tank? A.3 hours B. 2 hours C.4 minutes D. 1 minute
Water flows steadily from a large tank as shown in the figure. The height of water...
Water flows steadily from a large tank as shown in the figure. The height of water in the tank is H = 4 m represents the height from the centerline of the horizontal pipe to the surface of the water in the tank. The water flows out of the tank through a pipe with diameter of 4 cm. The stream of water flows through a bend (= 30 degrees, L = 2.88 m) and exits as a free jet through...
A cube with side length of L -0.5 m and mass of 500 kg is held...
A cube with side length of L -0.5 m and mass of 500 kg is held by a rope in a tank filled with water (mass density 1000 kg/m"). If the atmospheric pressure is 10' Pa, determine: a. the magnitude and the direction of the total force acted on the top part of the cube, b. the buoyant force on the cube, c. the tension of the rope. nun in the 10-3 m Tone by the 5. A number of...
A 4.00 cm x 4.00 cm x 4.00 cm cube of density 920 kg/m3 is floating at rest at the top of a beaker of cross sectional area 100 cm2 with 500 mL of water in it. 500 mL of oil of density 900 kg/m3 is add...
A 4.00 cm x 4.00 cm x 4.00 cm cube of density 920 kg/m3 is floating at rest at the top of a beaker of cross sectional area 100 cm2 with 500 mL of water in it. 500 mL of oil of density 900 kg/m3 is added to the top of the beaker, and the cube is observed to float completely submerged, unevenly straddling the boundary between the oil and water. a. Draw a picture showing the beaker, layers of...
a metal bucket with a height of 0.700 m and a mass of 650 kg is...
a metal bucket with a height of 0.700 m and a mass of 650 kg is
suspended from a rope in an open tank containing a liquid with a
density equal to 1530 kg / m ^ 3. The block is submerged 0.300m
below the surface. Calculate:
A) the upward force at the bottom of the block
B) the tension force of the rope
C) the magnitude of the buoyant force in the cube using the
principle of archimedes
String...
Problem 4: A 4 m-wide tank with height of 1.8 m filled with water is pulled with a cable inclined at 30° to the horizontal. The constant acceleration value in the cable direction is 4 m/s. The water depth is measured as 1.5 m before the motion starts. • Determine the angle between the water surface and the horizontal. • Compute the maximum and minimum pressure values on the bottom of the tank. • How many volume of water are...
the extra question i cant get
3. A concrete cube, 0.5 meters on each side, is lowered beneath the surface of Seneca Lake. At what depth is the water around it exerting an inward force of 1.7x10 newtons on each face of the cube? 69.4m 4. A 0.5 kg block is attached to a spring and oscillates on a horizontal frictionless surface in the usual way with an amplitude of 0.085 meters. The spring constant is 125 N/m and the...
2. A cube and a wedge with masses m1-5.00 kg and m2 10.0 kg are arranged as shown to the right. 9 There is no friction between the masses and there is no friction between the wedge and the floor. The masses are released from rest and the wedge moves to the left while the cube moves to the right. The masses only move up/down and left/right. They do not move into or out of the page. After release, the...
QULIOL DI LUMILLI ILJ Oil 28% 10 cm (a) A cube of side length 10.0 cm and made of an unknown materials floats at the interface between water and oil. The oil has a density of 810 kgm . Cube floats so that it is 72% in the water and 28% in the oil. Calculate the mass of the cube and the buoyant force on the cube. 72% Water 10 cm A firehose with a diameter of 70 mm is...
Water flows steadily from a large tank as shown in the figure. The height of water in the tank is H = 4 m represents the height from the centerline of the horizontal pipe to the surface of the water in the tank. The water flows out of the tank through a pipe with diameter of 4 cm. The stream of water flows through a bend (= 30 degrees, L = 2.88 m) and exits as a free jet through...
A cube with side length of L -0.5 m and mass of 500 kg is held by a rope in a tank filled with water (mass density 1000 kg/m"). If the atmospheric pressure is 10' Pa, determine: a. the magnitude and the direction of the total force acted on the top part of the cube, b. the buoyant force on the cube, c. the tension of the rope. nun in the 10-3 m Tone by the 5. A number of...
a metal bucket with a height of 0.700 m and a mass of 650 kg is
suspended from a rope in an open tank containing a liquid with a
density equal to 1530 kg / m ^ 3. The block is submerged 0.300m
below the surface. Calculate:
A) the upward force at the bottom of the block
B) the tension force of the rope
C) the magnitude of the buoyant force in the cube using the
principle of archimedes
String...
Most questions answered within 3 hours.
-
For a 2-Level design, with 8 factors, a recommended screening
design model is:
a. Taguchi L12...
asked 1 minute ago -
If domestic savings are insufficient to finance domestic private
investment and exports are greater than imports,...
asked 8 minutes ago -
Q.4.
Use the format in Exhibit 9-1 to compute the ending LIFO
inventory and cost of...
asked 13 minutes ago -
Discuss the different receiving and dispatch equipment required
for uploading and loading different types of material...
asked 18 minutes ago -
Which of the following is true for simultaneous testing?
a. Net specificity is greater than the...
asked 22 minutes ago -
Discuss the importance of homologous recombination and
transposition in natural horizontal gene transfer and evolution. Be...
asked 26 minutes ago -
Brittle material has the properties Sut = 30 kpsi and Suc = 90
kpsi. Using the...
asked 25 minutes ago -
*
write about Plastic recycling statistics ( Plastic recycling rate )
last two years , i...
asked 24 minutes ago -
The activation energy for a given reaction is 50.3 kJ/mol. If
the rate constant for the...
asked 1 hour ago -
An entomologist discovers a dung beetle rolling a ball of dung
along the ground, and decides...
asked 3 hours ago -
Humans have used horses for transportation for millions of
years. Therefore, they will use horses for...
asked 4 hours ago -
The following are the Jensen Corporation's unit costs of making
and selling an item at a...
asked 5 hours ago