Homework Answers
Add Answer to:
Part 3 a. From the information in part 1, estimate the production in ccy per hour...
a) Estimate the production in compacted cubic yards per hour for a roller if its average...
a) Estimate the production in compacted cubic yards per hour for a roller if its average speed will be 9.5 mph and it will cover 6.7 ft in one pass. The job specifications limit the compacted lift thickness to 4.8 inches and require 7 passes per lift. The company usually figures production based on 45 min per hour. b) How many hours will you need to produce 28,364 compacted cubic yards using this equipment (using the productivity from part(a)? C)...
Part 2 Based upon the results to part 1, the project requires hauling materials to, or...
Part 2 Based upon the results to part 1, the project requires hauling materials to, or from, the site. The following equipment is available for earthwork operations: - One 5-cy heaped capacity bucket loader; a 0.5 min cycle time; 90% fill capacity. - One 7-cy heaped capacity bucket loader; a 0.6 min cycle time; 90% fill capacity. 45.9-cy heaped capacity off-road trucks; a 0.5 min dump time; 100% fill capacity. - Loaded trucks travel through the following three sections: Haul...
Part 2 Based upon the results to part 1, the project requires hauling materials to, or...
Part 2 Based upon the results to part 1, the project requires hauling materials to, or from, the site. The following equipment is available for earthwork operations: - One 5-cy heaped capacity bucket loader; a 0.5 min cycle time; 90% fill capacity. - One 7-cy heaped capacity bucket loader; a 0.6 min cycle time; 90% fill capacity. 45.9-cy heaped capacity off-road trucks; a 0.5 min dump time; 100% fill capacity. - Loaded trucks travel through the following three sections: Haul...
use following to solve 3) Using an order of magnitude method (Hill), estimate the TCI in...
use following to solve
3) Using an order of magnitude method (Hill), estimate the TCI in year 2006 dollars for a grass-roots plant with 100,000-lb annual production using an order-of-magnitude method based on a 10,000-lb annual production. The plant contains three 1200-ft/min centrifugal fans, five 1500-ft/min centrifugal blowers, seven 100-ft' centrifugal separators, and two 100-ft shell-and-tube heat exchangers. You may assume all materials are carbon steel, the materials handled are primarily solid, and that this plant construction is done fully...
Check my work Required information The following information applies to the questions displayed below.) Part 1...
Check my work Required information The following information applies to the questions displayed below.) Part 1 of 5 128 Kitchen King's Toledo plant manufactures three product lines, all multi-burner, ceramic cook tops. The plant's three product models are the Regular (REG), the Advanced (ADV), and the Gourmet (GMT). Until recently, the plant used a job-order product-costing system, with manufacturing overhead applied on the basis of direct-labor hours. The following table displays the basic data upon which the traditional costing system...
summarizr the followung info and write them in your own words and break them into different...
summarizr the followung info and write them in your own words and break them into different key points. 6.5 Metering Chamber: 6.5.1 The minimum size of the metering box is governed by the metering area required to obtain a representative test area for the specimen (see 7.2) and for maintenance of reasonable test accuracy. For example, for specimens incorporating air spaces or stud spaces, the metering area shall span an integral number of spaces (see 5.5). The depth of...
summatize the following info and break them into differeng key points. write them in yojr own...
summatize the following info and break them into differeng key points. write them in yojr own words
apartus
6.1 Introduction—The design of a successful hot box appa- ratus is influenced by many factors. Before beginning the design of an apparatus meeting this standard, the designer shall review the discussion on the limitations and accuracy, Section 13, discussions of the energy flows in a hot box, Annex A2, the metering box wall loss flow, Annex A3, and flanking loss, Annex...
a) Estimate the production in compacted cubic yards per hour for a roller if its average speed will be 9.5 mph and it will cover 6.7 ft in one pass. The job specifications limit the compacted lift thickness to 4.8 inches and require 7 passes per lift. The company usually figures production based on 45 min per hour. b) How many hours will you need to produce 28,364 compacted cubic yards using this equipment (using the productivity from part(a)? C)...
Part 2 Based upon the results to part 1, the project requires hauling materials to, or from, the site. The following equipment is available for earthwork operations: - One 5-cy heaped capacity bucket loader; a 0.5 min cycle time; 90% fill capacity. - One 7-cy heaped capacity bucket loader; a 0.6 min cycle time; 90% fill capacity. 45.9-cy heaped capacity off-road trucks; a 0.5 min dump time; 100% fill capacity. - Loaded trucks travel through the following three sections: Haul...
Part 2 Based upon the results to part 1, the project requires hauling materials to, or from, the site. The following equipment is available for earthwork operations: - One 5-cy heaped capacity bucket loader; a 0.5 min cycle time; 90% fill capacity. - One 7-cy heaped capacity bucket loader; a 0.6 min cycle time; 90% fill capacity. 45.9-cy heaped capacity off-road trucks; a 0.5 min dump time; 100% fill capacity. - Loaded trucks travel through the following three sections: Haul...
use following to solve
3) Using an order of magnitude method (Hill), estimate the TCI in year 2006 dollars for a grass-roots plant with 100,000-lb annual production using an order-of-magnitude method based on a 10,000-lb annual production. The plant contains three 1200-ft/min centrifugal fans, five 1500-ft/min centrifugal blowers, seven 100-ft' centrifugal separators, and two 100-ft shell-and-tube heat exchangers. You may assume all materials are carbon steel, the materials handled are primarily solid, and that this plant construction is done fully...
Check my work Required information The following information applies to the questions displayed below.) Part 1 of 5 128 Kitchen King's Toledo plant manufactures three product lines, all multi-burner, ceramic cook tops. The plant's three product models are the Regular (REG), the Advanced (ADV), and the Gourmet (GMT). Until recently, the plant used a job-order product-costing system, with manufacturing overhead applied on the basis of direct-labor hours. The following table displays the basic data upon which the traditional costing system...
summatize the following info and break them into differeng key points. write them in yojr own words
apartus
6.1 Introduction—The design of a successful hot box appa- ratus is influenced by many factors. Before beginning the design of an apparatus meeting this standard, the designer shall review the discussion on the limitations and accuracy, Section 13, discussions of the energy flows in a hot box, Annex A2, the metering box wall loss flow, Annex A3, and flanking loss, Annex...
Most questions answered within 3 hours.
-
The correct answer will be upvoted with positive feedback,
giving me incorrect answers will result in...
asked 22 minutes ago -
Question:
Evaluation: Answer both (a) and (b): (a) Looking at
Table 6.1 in our text, explain...
asked 31 minutes ago -
What is the maximum number of edges that a graph on 7 vertices can
have if...
asked 52 minutes ago -
Question 05
(a) i) What are the three type of general defects in welding?
ii) Explain...
asked 37 minutes ago -
If the wage rate increases from $12 to $16 and, as a result, the
quantity demanded...
asked 43 minutes ago -
the slime layer external to the prokaryotic cell wall is called
the ?
asked 51 minutes ago -
Cheyenne Company must decide whether to make or buy some of its
components. The costs of...
asked 53 minutes ago -
What is the entropy change for mixing 1 liter of a monoatomic
ideal gas (call it...
asked 51 minutes ago -
A company that has 150 employees chooses a committee of 11 to
represent employee retirement issues....
asked 1 hour ago -
the
force between two 2.11 x 10^-4 C charges that are 2.11 meters apart
is ______N?
asked 1 hour ago -
A truck of mass m slows from speed v0 to speed v in a
time t....
asked 1 hour ago -
A 60kg box rests on a floor with a coefficient of kinetic
friction of 0.600 and...
asked 1 hour ago