A 36-lb motor is bolted to a light horizontal beam that has a static deflection of 0.075 in. due to the weight of the motor. The unbalance of the rotor is equivalent to a weight of 0.64 oz located 6.25 in. from the axis of rotation. The motor rotates at a speed of 1080 rpm. Determine the amplitude of the vibration of the motor assuming that the damping factor c/cc is equal to 0.055.
The amplitude of the vibration is ________ in.
SOLUTION:-
A = 0.01154 INCH
---------------------- end - of - solution----------------------
Thank you
Please provide feedback and Thumps Up
A 36-lb motor is bolted to a light horizontal beam that has a static deflection of...
A 35-kg fan is bolted to a light horizontal catilever beam. The unbalance of its rotor is equivalent to a 40 g mass located 45-mm from the axis of rotation. Knowing that resonance occurs at (234) RPM, determine: -the amplitude (in mm) of the steady state vibration at: a) (244) RPM b) (239) RPM, c) (235) RPM, d) (232) RPM -also determine the imbalance force at each of these four speeds (in Newtons)
A 50 lb motor is bolted to the middle of a 72-inch long plank, and x is the displacement of the motor from its equilibrium position. The plank may be modeled as a simply supported beam with EI 18 x 10 lb-in2. Use the inch-pound-second system of units to work this problem, and use g 386 in/sec2 a) Neglect the mass of the plank and find the system's undamped natural frequency of vibration (ansuwer: f 21.3 Hz) b) Suppose the...
QUESTION 2 Consider an electrical motor with mass M = 901.8129 kg located at the middle of pinned-pinned beam, as shown in the figure below. Assume that the Young’s modulus of the beam E = 8.5470x1010 Pa, moment of inertia I = 8.3375x104 mm4 , length of the beam L = 0.2859 m and zero initial conditions. If there is an unbalance mass of m0 = 2.3714 kg in the rotating part of the motor, eccentricity is e = 4.1473...