What is the current flow in the line supplying a three-phase load of 2 kW at...
What is the current flow in the line supplying a three-phase load of 2 kW at 208-V three phase? (Assuming the load is 100% resistance.)
a. None of these
b. 7kW
c. 6.25A
d. 6 kW
e. 5.55A
Homework Answers
Dear student hope it helps
you. Please don't forget to give thumbs up thank you
Add Answer to:
What is the current flow in the line supplying a three-phase
load of 2 kW at...
The three-phase average power of a synchronous motor is 23kW. The three-phase line supplying the motor...
The three-phase average power of a synchronous motor is 23kW. The three-phase line supplying the motor has a line voltage rating of 208 V (rms). The line current is 75A per phase. Determine the power factor and the reactive power absorbed by the motor/
A line voltage of 480 V and a line current of 225 mA are supplying a balanced, 3-ф load. If the load for each phase consists of a 1 k(2 resistor in series with a 3.7 μF capacitor: is the load Δ-or Y-...
A line voltage of 480 V and a line current of 225 mA are supplying a balanced, 3-ф load. If the load for each phase consists of a 1 k(2 resistor in series with a 3.7 μF capacitor: is the load Δ-or Y-connected? give the magnitudes of the phase current and phase voltage a. b.
A line voltage of 480 V and a line current of 225 mA are supplying a balanced, 3-ф load. If the load for each phase...
1. A renewable energy system delivers 120 kW of three-phase power at 400 V (line-line) to...
1. A renewable energy system delivers 120 kW of three-phase power at 400 V (line-line) to a load with a 0.9 lagging power factor. If each power line has a resistance of R = 0.03 Ω and reactance of X = 0.04 Ω, determine the sending end voltage (line-line) of the three-phase power line connected to the renewable energy system for supplying power to the load. 2. A network service operator found that the voltage rise in a network due...
Question 2: A large network supplies a three phase induction motor through a short feeder line. The following data are provided No-load Test Data: ho-load 480 V; Ino-load = SA; Pno-load 1.3 kw Blocke...
Question 2: A large network supplies a three phase induction motor through a short feeder line. The following data are provided No-load Test Data: ho-load 480 V; Ino-load = SA; Pno-load 1.3 kw Blocked-rotor Test Data: Volocked-rotor 52 V; Iblocked-rotor 34 A; Polocked-rotor 1.3 kw: frequencyblocked-Fotor 25 Hz Stator Resistance: Rstator 0.3529 n/mile; Length 3 miles (0.1+j0.56) Supply Feeder Data: Zfeeder HP: v,upply-440 V: Number of poles-4: Slip-2.5%; Ploss- 250 w a. Calculate the magnetizing impedance of the three phase...
Problem 3: A three-phase, 60 Hz transmission line is built with an ACSR conductor. The conductor...
Problem 3: A three-phase, 60 Hz transmission line is built with an ACSR conductor. The conductor diameter is 0.68 inch, GMR = 0.023 ft., and AC resistance of 0.342 /mile at 50°C. The conductors are laterally spaced with D= 1.7 m between conductor centers. The line is 50 km long and supplies a 5 MW load. The line to line load voltage is 13.2 kV. [40 points] (a) Find the total impedance of the line. (b) Determine the sending-end voltage,...
UISIZULU Problem 4 A three phase, 5 kW, wye-connected load operate onnected load operates at 0.8...
UISIZULU Problem 4 A three phase, 5 kW, wye-connected load operate onnected load operates at 0.8 power factor lagging with a terminal voltage of 100 V (line to line). The cables connecting e bles connecting each phase of the load to the wye-connected supply has an impedance of (0.25 +0.25) 12. Compute the following: a) Reactive power drawn by the load. b) Real and reactive power losses in the system. me current and line voltage at the source terminals and...
Question 2: In a 208-V (line-to-line, rms), 60-Hz, 5-kW motor, tests are carried out with the following results: Rphase phase-1.1 Ω. No-Load Test: applied voltages of 208 V (line-line, rms), 1a 6.5 A...
Question 2: In a 208-V (line-to-line, rms), 60-Hz, 5-kW motor, tests are carried out with the following results: Rphase phase-1.1 Ω. No-Load Test: applied voltages of 208 V (line-line, rms), 1a 6.5 A, and Pno load.3 phase 175 W. Blocked-Rotor Test: applied voltages of 53 V (line-line, ms), la18.2 A, and Pblocked,3 phase - 900 W. Estimate the per-phase equivalent circuit parameters.
Question 2: In a 208-V (line-to-line, rms), 60-Hz, 5-kW motor, tests are carried out with the following results:...
Two three-phase generators supply a three-phase load through separate three-phase lines. The load absorbs 30 kW...
Two three-phase generators supply a three-phase load through separate three-phase lines. The load absorbs 30 kW at 0.8 power factor lagging. The line impedance is (1.4 +J1.6) Ω per phase between generator G1 and the load, and (0.8 +jl ) Ω per phase between generator G2 and the load. If generator Gl supplies 15 kW at 0.8 power factor lagging, with a terminal voltage of 460 V line- to-line, determine 1. The voltage at the load terminals. 2. The voltage...
Search Results for: A 100 kVA, 1100 V, three-phase, 6-pole, Y-connected, 50 Hz synchronous machine has synchronous reactance of 6 $2 per-phase and negligible armature resistance. Its core losses are 7 kW and its friction and windage losses are 8 kW. The s
A 100 k VA, 1100 V, three-phase, 6-pole, Y-connected, 50 Hz synchronous machine has synchronousreactance of 6 92 per-phase and negligible armature resistance. Its core losses are 7 k W and itsfriction and windage losses are 8 kW. The speed droop is 2.5%.Initially the machine is operated alone as a generator and the field current is adjusted such that theno-load voltage equals the rated voltage.a) If the generator is supplying a line current of $2.5 A at 0.85 PF lagging....
1. A full-bridge three-phase SCR rectifier supplies an L-R load from a 208 V line-to-line 60...
1. A full-bridge three-phase SCR rectifier supplies an L-R load from a 208 V line-to-line 60 Hz source. The load draws 25 kW when the SCR phase delay angle is 60°. What is the pulse number for this rectifier circuit? Plot the load power as a function of delay angle for 0° < α 75°
A line voltage of 480 V and a line current of 225 mA are supplying a balanced, 3-ф load. If the load for each phase consists of a 1 k(2 resistor in series with a 3.7 μF capacitor: is the load Δ-or Y-connected? give the magnitudes of the phase current and phase voltage a. b.
A line voltage of 480 V and a line current of 225 mA are supplying a balanced, 3-ф load. If the load for each phase...
Question 2: A large network supplies a three phase induction motor through a short feeder line. The following data are provided No-load Test Data: ho-load 480 V; Ino-load = SA; Pno-load 1.3 kw Blocked-rotor Test Data: Volocked-rotor 52 V; Iblocked-rotor 34 A; Polocked-rotor 1.3 kw: frequencyblocked-Fotor 25 Hz Stator Resistance: Rstator 0.3529 n/mile; Length 3 miles (0.1+j0.56) Supply Feeder Data: Zfeeder HP: v,upply-440 V: Number of poles-4: Slip-2.5%; Ploss- 250 w a. Calculate the magnetizing impedance of the three phase...
Problem 3: A three-phase, 60 Hz transmission line is built with an ACSR conductor. The conductor diameter is 0.68 inch, GMR = 0.023 ft., and AC resistance of 0.342 /mile at 50°C. The conductors are laterally spaced with D= 1.7 m between conductor centers. The line is 50 km long and supplies a 5 MW load. The line to line load voltage is 13.2 kV. [40 points] (a) Find the total impedance of the line. (b) Determine the sending-end voltage,...
UISIZULU Problem 4 A three phase, 5 kW, wye-connected load operate onnected load operates at 0.8 power factor lagging with a terminal voltage of 100 V (line to line). The cables connecting e bles connecting each phase of the load to the wye-connected supply has an impedance of (0.25 +0.25) 12. Compute the following: a) Reactive power drawn by the load. b) Real and reactive power losses in the system. me current and line voltage at the source terminals and...
Question 2: In a 208-V (line-to-line, rms), 60-Hz, 5-kW motor, tests are carried out with the following results: Rphase phase-1.1 Ω. No-Load Test: applied voltages of 208 V (line-line, rms), 1a 6.5 A, and Pno load.3 phase 175 W. Blocked-Rotor Test: applied voltages of 53 V (line-line, ms), la18.2 A, and Pblocked,3 phase - 900 W. Estimate the per-phase equivalent circuit parameters.
Question 2: In a 208-V (line-to-line, rms), 60-Hz, 5-kW motor, tests are carried out with the following results:...
Two three-phase generators supply a three-phase load through separate three-phase lines. The load absorbs 30 kW at 0.8 power factor lagging. The line impedance is (1.4 +J1.6) Ω per phase between generator G1 and the load, and (0.8 +jl ) Ω per phase between generator G2 and the load. If generator Gl supplies 15 kW at 0.8 power factor lagging, with a terminal voltage of 460 V line- to-line, determine 1. The voltage at the load terminals. 2. The voltage...
1. A full-bridge three-phase SCR rectifier supplies an L-R load from a 208 V line-to-line 60 Hz source. The load draws 25 kW when the SCR phase delay angle is 60°. What is the pulse number for this rectifier circuit? Plot the load power as a function of delay angle for 0° < α 75°
Most questions answered within 3 hours.
-
Calculate the pH of each of the following given the molar
hydrogen ion concentration.
Part A...
asked 4 minutes ago -
A rocket takes off from Earth's surface, accelerating straight
up at 43.2 m/s2. Calculate the normal...
asked 6 minutes ago -
At
the milestone that defines telophase,the chromosomes ....
a) separate
b) come together
c) line up...
asked 19 minutes ago -
The text identifies six steps for minimizing product liability
risk in the product development process. The...
asked 19 minutes ago -
1,We can create a new text file with the following commands,
except: Group of answer choices...
asked 21 minutes ago -
High End Costume is all-equity financed and its stock has a
price to earnings ratio of...
asked 31 minutes ago -
A block of 2 kg of mass is attached to a horizontal spring. The
spring is...
asked 42 minutes ago -
How are thermohaline currents tied to the atmosphere and how can
these currents affect climate variations...
asked 49 minutes ago -
One 2.5 MW turbine had a monthly production of 700 MWh, while
the 250 MW wind...
asked 58 minutes ago -
C++ question.
Introduce a pass by pointer function that reverses a whole
vector.
asked 55 minutes ago -
The number of head trauma injuries at a small hospital has a
Poisson distribution with a...
asked 58 minutes ago -
1. An airplane leaves airport A and travels in a straight line
in a direction 30...
asked 1 hour ago