pls if you could do it in a well explained way. Strength of Materials Assignment 4...

Question

Question

Strength of Materials Assignment 4 Problem 1) A beam of rectangular cross section is 125 mm wide and 200 mm deep. If the maxi

pls if you could do it in a well explained way.

Answer 1

Answer #1

Maxima Compressive beating Stress, Oc) max Momax yc. I 8.5xlove xlovo Xiao 83333333.3 = 34.2 1/mm b) Giveng og bending Stress

Answer 2

Similar Homework Help Questions

A beam of rectangular cross section is 125 mm wide and 200 mm deep. If the...

A beam of rectangular cross section is 125 mm wide and 200 mm deep. If the maximum bending moment is 28.5 kN.m, determine (a) the maximum tensile and compressive bending stress, and (b) the bending stress 25 mm from the top of the section.
2. A rectangular beam, 400 x 600 mm gross dimension, is cast using a concrete strength...

2. A rectangular beam, 400 x 600 mm gross dimension, is cast using a concrete strength of fc 30 MPa, reinforced with 5-25 mm diameter steel bar at the effective depth of 500 mm. If is subjected to a moment, M 130 kN-m. Determine the following: Magnitude of the bending moment that cracks the singly-reinforced beam section. (10 pts) b. For the computed cracking moment, determine the maximum compressive stress in the concrete and the stress in the tension steel....
A beam of rectangular cross section 200 mm deep and 100 mm wide. If the beam...

A beam of rectangular cross section 200 mm deep and 100 mm wide. If the beam is 3m long, simply supported at either end and carries point loads as shown in FIGURE 2 (on page 4). 2. SAN 1OAN R, FR 100mm FIG.2 (a) Calculate the maximum bending moment (b) Calculate the maximum stress in the beam (c) At the point of maximum stress sketch a graph of the stress distribution through the thickness of the beam, indicating which are...

5) Find the moment M, if the maximum tensile stress in the T shape cross section js 1 ksi. Determ...

5) Find the moment M, if the maximum tensile stress in the T shape cross section js 1 ksi. Determine the maximum compressive stress. 7) a-a is 10 in wide and 6 in deep. Determine maximum tensile and comoressive stress on a-a Find the moment M, if the maximum tensile stress in the T-shape cross section is 1ksi. Determine the maximum compressive stress. 2 in 10 in 2 in 4 in -1 in 1 inz 2 in 11 in 2...
5) Find the moment M, if the maximum tensile stress in the T shape cross section...

5) Find the moment M, if the maximum tensile stress in the T shape cross section js 1 ksi. Determine the maximum compressive stress. 7) a-a is 10 in wide and 6 in deep. Determine maximum tensile and comoressive stress on a-a Find the moment M, if the maximum tensile stress in the T-shape cross section is 1ksi. Determine the maximum compressive stress. 2 in 10 in 2 in 4 in -1 in 1 inz 2 in 11 in 2...
For the beam shown below (neglect self-weight of the beam) 16 kN x 8 mm 19...

For the beam shown below (neglect self-weight of the beam) 16 kN x 8 mm 19 kN 10 kN/m T 2 mm mm A4n - 3 m +3m → a. Draw the shear force and bending moment diagram. 2 mm Section X-X b. For the cross section x-x given, calculate the maximum tensile and compressive bending stress c. For the cross section X-X given, calculate the maximum shear stress

If the beam is subjected to a moment of M = 100 kn-m, determine the bending stress at points A, B, and C.

If the beam is subjected to a moment of M = 100 kn-m, determine the bending stress at points A, B, and C. Sketch the bending stress distribution on the cross Section. If the beam is made of a material having an allowable tensile and compressive stress of σallow(T) = 125 MPa and σallow(C) = 150 MPa, respectively, determine the maximum moment M that can be applied to the beam.
2. (32 pts) Two identical 20 mm thick plates are bolted to the top and bottom...

2. (32 pts) Two identical 20 mm thick plates are bolted to the top and bottom Mange to form the build-up heam. If the beam is subjected to a shear force of V = 300 KN and a bending moment of M = 500 KN-m. d) Calculate the shear stress between flange plates. If each bolt has a shear strength of 30 KN, determine a) Calculate moment of inertia of the cross section in the z axis. b) Calculate the...
2 KNm 8 kN·m 30 mmA 150 mm 150 ma FIND a) Sketch the shear and...

2 KNm 8 kN·m 30 mmA 150 mm 150 ma FIND a) Sketch the shear and moment diagrams. b) Determine the maximum tensile stress on a cross section just to the left of B, where the 8 kN m couple acts. c) Determine the maximum compressive stress o on a cross section just to the left of B d) Determine the absolute maximum bending stress in the beam and draw the stress distribution over the cross section at this point.