piezometer and a pitot tube are put in a 1 ft diameter pipe repectivley full of...
Fluilds A piezometer and a Pitot tube are tapped into a 4-cm-diameter horizontal water pipe, and the height of the water columns are measured to be 26 cm in the piezometer and 38 cm in the Pitot tube (both measured from the top surface of the pipe). Determine the velocity at the center of the pipe. The velocity at the center is O m/s.
A piezometer is attached to a water pipe at point 1 as shown below. A pitot tube is attached at point 2. The pitot tube measures the total piezometric head (h2) since V2 = 0. KO - h1 = 1.4 ft, and h2 = 2.6 ft. Water density p = 62.4 lb/ft3 = 1.94 slug/ft?, g = 32.2 ft/s2 Determine the velocity V1 V1 = 77.3 ft/s V1 = 4.85 ft/s V1 = 6.22 ft/s V1 = 8.79 ft/s
pls help 3. (15) When measuring the flow through a 6-in diameter pipe, a piezometer measures 20.0 psi and a pitot tube measures 20.5 psi. What is the flow rate in the pipe?
Water is flowing full in an 18-inch diameter pipe at a velocity of 8.55 ft/s. Find the discharge, Q, in cfs.
3. A tube is constructed of a 7.0 cm diameter pipe with a 2.0 cm diameter throat. The pressure of the water in the pipe is twice atmospheric pressure, while in the throat the pressure is 1.5 times atmospheric pressure. What is the velocity of the water in the pipe? (Note: Pwater = 1000 kg/m3 and 1 atm = 101,300 Pa]
A horizontal tube consists of a 7.0-cm diameter pipe that narrows to a 2.0-cm-diameter throat. In the pipe, the water pressure is twice atmospheric pressure and the water flows with a speed of 0.40 ms. What is the pressure in the throat, assuming that the water behaves like an ideal fluid? The density of water is 1000 kg/m^3, and atmospheric pressure is 1.01 X 10^5Pa
A round pipe full of water is 100 feet high. The pipe diameter is 2'- 0". What is the pressure at the bottom of the pipe?
hydraulics Water flows in the pipeline. Calculate maximum velocity umax in the pipe axis and discharge Q. Determine whether the flow is laminar or turbulent (T 12°C). The mercury differential manometer (E 13600 kgm 3) shows the difference between levels in Pitot tube Hn 0.02 m. Diameter of the pipe is D-0.15 m. Mean velocity is.considered to be v-0.4 ua Hm На
1) 2) 3) Oil flows through an 8-inch diameter pipe with a velocity of 18 ft/s. If it discharges into the atmosphere through the nozzle, determine the total force the bolts must resist at the connection AB to hold the nozzle onto the pipe. Assume Yo = 55 lb/ft3. (30 pts) 8 in. 4 in. 18 m/s 06 PROB011 Research is being conducted on a medical specimen. They are trying to determine the pressure drop in fluid carrying vessels. If...
Water flows in a pipe that has a 4 ft diameter and the following hypothetical velocity distribution: The velocity is maximum at the centerline and decreases linearly with r to a minimum at the pipe wall. If Vmax = 15 ft/s and Vmin = 12 ft/s, what is the discharge in cubic feet per second and in gallons per minute? The volume flow rate is given by the integral of the velocity over the area Q = -fvaa Using the...