Homework Answers
As HOMEWORKLIB RULES rule I can answer only one question at a time ,,,,Please Thumb's Up.....
1.)
Add Answer to:
1)
2)
3)
Oil flows through an 8-inch diameter pipe with a velocity of 18 ft/s....
Sulphuric acid is flowing through a pipe (2.5 inch diameter, 50 ft length) in a velocity...
Sulphuric acid is flowing through a pipe (2.5 inch diameter, 50 ft length) in a velocity of 0.006 m3 /s. The sulphuric acid has a viscosity of 25 mN.s/m2 and density of 1680 kg/m3 while the roughness of the pipe surface is 1.3 mm. If the operating temperature is 290K, determine fluid flow (i.e. laminar, turbulent or others). (Given that 1 m = 39.37 inch).
8. (15 points) Water flows through a 2-in diameter pipe with a velocity of 15 ft/s...
8. (15 points) Water flows through a 2-in diameter pipe with a velocity of 15 ft/s as shown in the figure below. The relative roughness of the pipe is 0.0004 ft, and the loss coefficient for the exit is 1.0. Values for the liquid height in the tank (2) and the pipe length between the standpipe and tank (L) are 8 ft and 8 ft, respectively. Determine the height, h (ft), to which the water rises in the standpipe. P...
8. (15 points) Water flows through a 3-in diameter pipe with a velocity of 25 ft/s...
8. (15 points) Water flows through a 3-in diameter pipe with a velocity of 25 ft/s as shown in the figure below. The relative roughness of the pipe is 0.0004 ft, and the loss coefficient for the exit is 1.0. Values for the liquid height in the tank (z) and the pipe length between the standpipe and tank (L) are 6 ft and 10 ft, respectively. Determine the height, h (ft), to which the water rises in the standpipe. P...
Please answer question 3 and 4 Question 3: Water flows from a reservoir through a 16-inch...
Please answer question 3 and
4
Question 3: Water flows from a reservoir through a 16-inch
diameter pipe and then discharges at a 2-inch nozzle. If the
velocity in the pipe is 5 ft/sec, what is the velocity in the
nozzle, in ft/sec?
Question 4: A water deliver company is trying to decide which
size pipe to use. They need to deliver 500 GPM and keep their
velocity below the 15 ft/sec threshold. What minimum size pipe
should they use?...
Question (a) Sulphuric acid is flowing through a pipe (2.5 inch diameter, 50 ft length) in...
Question (a) Sulphuric acid is flowing through a pipe (2.5 inch diameter, 50 ft length) in a velocity of 0.006 m2/s. The sulphuric acid has a viscosity of 25 mN.s/m² and density of 1680 kg/m² while the roughness of the pipe surface is 1.3 mm. If the operating temperature is 290K, determine fluid flow (i.e. laminar, turbulent or others). (Given that 1 m= 39.37 inch) (b) Define pump, suction head, impelling head and the total head of a pump. (c)...
Sulphuric acid is flowing through a 2.5 inch diameter and 50ft long pipe with a velocity...
Sulphuric acid is flowing through a 2.5 inch diameter and 50ft long pipe with a velocity of 0.006 m3 /s. The sulphuric acid has a viscosity of 25 mN.s/m2 and density of 1680 kg/m3 while the roughness of the pipe surface is 1.3 mm. If the operating temperature is 290K, determine fluid flow (examples turbulent, laminar or others).
Determine the differential height,&! the water manometer of the oil flow rate
determine the differential height,&! the water manometer
of the oil flow rate
CHE 3315 FLUID MECHANICS PROBLEM SHEET 10: PIPE NETWORKS AND FLOW MEASUREMENT 1. Water flows into the 2-inch-diameter galvonized iron pipe shown below at 0.3 ft3/s. If the pipe branches into two 1-inch diameter pipes ABD and ACD, which are 4 ft and 6 ft long repectively. (a) determine the flow rate through each pipe in m3/s, neglecting minor losses, (b) determine the pressure drop across each branch....
6-7. Oil flows through the 100-mm-diameter pipe with a velocity of 8 m/s. If the pressure...
6-7. Oil flows through the 100-mm-diameter pipe with a velocity of 8 m/s. If the pressure in the pipe at A and B is assumed to be 60 kPa, determine the x and y components of force the flow exerts on the elbow. The flow occurs in the horizontal plane. Take ρο -900 kg/m3 8 m/s 30° 100 mm 100 mm
The linear flow rate of a chemical through a 4.25-inch inner diameter pipe is 0.956 ft/s....
The linear flow rate of a chemical through a 4.25-inch inner diameter pipe is 0.956 ft/s. The chemical has a density of 54.3 lb/ft3 . What is the mass flow rate of the chemical, in lb/s? A. 1009 lb/s B. 10.09 lb/s C. 7.00 lb/s D. 5.11 lb/s E. 2.48 lb/s
Research is being conducted on a medical specimen. They are trying to determine the pressure drop...
Research is being conducted on a medical specimen. They are trying to determine the pressure drop in fluid carrying vessels. If the vessel of interest is 25 cm long and has a diameter of 3 cm; determine the pressure drop if the transported fluid has a flowrate of 90 cm/s, density (p) of 1060 kg/m and dynamic viscosity (u) of 30 mp. (millipoise). (25pts)
8. (15 points) Water flows through a 2-in diameter pipe with a velocity of 15 ft/s as shown in the figure below. The relative roughness of the pipe is 0.0004 ft, and the loss coefficient for the exit is 1.0. Values for the liquid height in the tank (2) and the pipe length between the standpipe and tank (L) are 8 ft and 8 ft, respectively. Determine the height, h (ft), to which the water rises in the standpipe. P...
8. (15 points) Water flows through a 3-in diameter pipe with a velocity of 25 ft/s as shown in the figure below. The relative roughness of the pipe is 0.0004 ft, and the loss coefficient for the exit is 1.0. Values for the liquid height in the tank (z) and the pipe length between the standpipe and tank (L) are 6 ft and 10 ft, respectively. Determine the height, h (ft), to which the water rises in the standpipe. P...
Please answer question 3 and
4
Question 3: Water flows from a reservoir through a 16-inch
diameter pipe and then discharges at a 2-inch nozzle. If the
velocity in the pipe is 5 ft/sec, what is the velocity in the
nozzle, in ft/sec?
Question 4: A water deliver company is trying to decide which
size pipe to use. They need to deliver 500 GPM and keep their
velocity below the 15 ft/sec threshold. What minimum size pipe
should they use?...
Question (a) Sulphuric acid is flowing through a pipe (2.5 inch diameter, 50 ft length) in a velocity of 0.006 m2/s. The sulphuric acid has a viscosity of 25 mN.s/m² and density of 1680 kg/m² while the roughness of the pipe surface is 1.3 mm. If the operating temperature is 290K, determine fluid flow (i.e. laminar, turbulent or others). (Given that 1 m= 39.37 inch) (b) Define pump, suction head, impelling head and the total head of a pump. (c)...
determine the differential height,&! the water manometer
of the oil flow rate
CHE 3315 FLUID MECHANICS PROBLEM SHEET 10: PIPE NETWORKS AND FLOW MEASUREMENT 1. Water flows into the 2-inch-diameter galvonized iron pipe shown below at 0.3 ft3/s. If the pipe branches into two 1-inch diameter pipes ABD and ACD, which are 4 ft and 6 ft long repectively. (a) determine the flow rate through each pipe in m3/s, neglecting minor losses, (b) determine the pressure drop across each branch....
6-7. Oil flows through the 100-mm-diameter pipe with a velocity of 8 m/s. If the pressure in the pipe at A and B is assumed to be 60 kPa, determine the x and y components of force the flow exerts on the elbow. The flow occurs in the horizontal plane. Take ρο -900 kg/m3 8 m/s 30° 100 mm 100 mm
Research is being conducted on a medical specimen. They are trying to determine the pressure drop in fluid carrying vessels. If the vessel of interest is 25 cm long and has a diameter of 3 cm; determine the pressure drop if the transported fluid has a flowrate of 90 cm/s, density (p) of 1060 kg/m and dynamic viscosity (u) of 30 mp. (millipoise). (25pts)
Most questions answered within 3 hours.
-
Calculate the following: ***SHOW ALL WORK!!!! Or
NO CREDIT*** Circle your answers. 8pts
each
In the...
asked 42 minutes ago -
Bank Z is currently advertising interest rates on its checking
account. They claim to pay an...
asked 6 minutes ago -
List two ways of transformation on the response variable that
can be used to deal with...
asked 1 hour ago -
If a 2000 ohm resistor has a -3.90 mA current going through it.
What is the...
asked 1 hour ago -
Please comment on the sentences.
Some types of jobs require more training than others. Some
companies...
asked 2 hours ago -
The )G01 for the hydrolysis of phosphorarginine
reaction depicted below is –32 kJ mol-1.
Phosphoarginine ...
asked 2 hours ago -
Cross a heterozygous blue-eyed goat with a homozygous brown-eyed
goat. Be sure to indicate which kids...
asked 3 hours ago -
Use the following information to answer the next two
questions.
Please refer to question 9-90. A...
asked 3 hours ago -
A solution containing 0.050 g of an unknown electrolyte in 2.50
g of cyclohexane was found...
asked 3 hours ago -
Question 1
a) Hydraulic conductivity of soils is an important parameter for
the design of engineering...
asked 3 hours ago -
Suppose your credit card balance is
$15,000
The minimum payment is
$313
and the annual percentage...
asked 3 hours ago -
Professor plays basketball and makes 75% of free
throws she shoots. If professor shot 5 free...
asked 3 hours ago