Homework Answers
Add Answer to:
Determine the differential height,&! the water manometer of the oil flow rate
1) Consider the schematic diagram below. If the pump supplies 225kW to the water, what flow rate ...
1) Consider the schematic diagram below. If the pump supplies 225kW to the water, what flow rate will occur in the pipes? Pump 1 has length 450m and diameter 200mm. Pipe Π has length of 450m and diameter of 250mm. Assume a friction factor of f-0.02 for both pipes. gnore all minor losses and the losses in the pipe upstream of the pump. (ans. Q,-0.1 m3/s, Q1-0.175m3/s) RL-90m RL=30m >Pipe Pump Water Pipe II
1) Consider the schematic diagram below....
fluid mechanics ASAP please Problem 4 (50 points) Water is discharged from a reservoir at a rate of 18.103 m3/s using two horizontal cast iron pipes connected in series and a pump between them. T...
fluid mechanics
ASAP please
Problem 4 (50 points) Water is discharged from a reservoir at a rate of 18.103 m3/s using two horizontal cast iron pipes connected in series and a pump between them. The first pipe is 20 m long and has a 6-cm diameter, while the second pipe is 35 m long and has a 4-cm diameter. The water level in the reservoir is 30 m above the centerline of the pipe. The pipe entrance is sharp-edged. Losses...
0.5 in 10-72. The copper pipe system, which transports water at 70°F, consists of two branches....
0.5 in 10-72. The copper pipe system, which transports water at 70°F, consists of two branches. The pipe for branch ABC has a diameter of 0.5 in. and length of 8 ft, whereas the pipe for branch ADC has a diameter of 1 in. and length of 30 ft. If a pump provides an inlet flow at A of 67.3 gal/min, determine the flow in gal/min through each branch. Take e-80(10-6) ft. The system is in the horizontal plane. Include...
A pipe caring water with volumetric flow rate 0.6 m3/s branches into five pipes. The first...
A pipe caring water with volumetric flow rate 0.6 m3/s branches into five pipes. The first pipe is (diameter=33Cm and velocity=1.3m/s), the second pipe is (diameter=32Cm), the third pipe is (diameter=26Cm and velocity=1.8m/s), the fourth pipe is (diameter=28Cm and velocity=2.2m/s), while the fifth pipe is (diameter=25Cm and velocity=2m/s). Find the velocity in the second pipe. Density of water=1000kg/m3. Select one: O a. 1.982 m/s Ob. 1.883 m/s O c. 2.014 m/s O d. 2.121 m/s O e. 2.231 m/s
Water at 20° flows in pipeline system shown below (Fig. 1) at rate of 32400 Vhr....
Water at 20° flows in pipeline system shown below (Fig. 1) at rate of 32400 Vhr. Pipe 1 is 15m long and 0.044 m outer diameter and pipe 2 is 100m long and 0.034m outer diameter. The thickness of both pipes is 2mm. Pipe 1 is a ductile iron uncoated pipe and pipe 2 is ductile iron coated pipe. There are totally 4 elbows in the system (two elbows in each pipe) and the elbows are 90° street elbows. All...
A centrifugal pump test yields the following data: Pump Head Flow (m)(L/min) 30 25 20 40 The pump...
A centrifugal pump test yields the following data: Pump Head Flow (m)(L/min) 30 25 20 40 The pump curve can be approximated by a parabola. This pump draws water from a large reservoir. The discharge of the pump feeds 150 m of 1.5 cm inside diameter pipe and then 225 m of 3 cm inside diameter pipe.. The two pipes both have a roughness of 0.5 mm The 3 cm pipe discharges to atmosphere a distance 40 m below the...
Water at 20° flows in pipeline system shown below (Fig.1) at rate of 32400 1hr. Pipe...
Water at 20° flows in pipeline system shown below (Fig.1) at rate of 32400 1hr. Pipe 1 is 15m long and 0.044 m outer diameter and pipe 2 is 100m long and 0.034m outer diameter. The thickness of both pipes is 2mm. Pipe 1 is a ductile iron uncoated pipe and pipe 2 is ductile iron coated pipe. There are totally 4 elbows in the system (two elbows in each pipe) and the elbows are 90° street elbows. All pipes...
a. Calculate the Reynolds number for flow in a pipe that transports water at 50°C at...
a. Calculate the Reynolds number for flow in a pipe that transports water at 50°C at a speed of 8 ft/s. The pipe has an inside diameter of 2.469 in. The density of water at 50°C is equal to 61.6 lb/ft3 . b. Calculate the Reynolds number for flow in a pipe that transports a liquid with a density of 931 kg/m3 and a viscosity of 2.5x10-3 Pa-s. The liquid flows at a rate of 4.3 m3/s and the pipe...
CHE 3315 FLUID MECHANICS PROBLEM SHEET 5: MASS CONSERVATION AND FLOW RATE 1. Determine the mass...
CHE 3315 FLUID MECHANICS PROBLEM SHEET 5: MASS CONSERVATION AND FLOW RATE 1. Determine the mass flow rate of air having a temperature of 20C and gauge pressure 80 kPa as it flows through a circular duct 400 mm in diameter with an average velocity of 3 m/s. The gas specific constant R 286.9 JK /kg 2. Determine the average velocity of the steady flow at one outlet of a T- junction if the inlet flow speed is 6 m/s...
Basics of Fluid Mechanics 2. Example 1-5 For the Y-branch shown, water enters the pipe section...
Basics of Fluid Mechanics 2. Example 1-5 For the Y-branch shown, water enters the pipe section at 15 velocities in both branches 2 and 3 are the same and the diameter of the pipe at is 50 mm, diameter at 2 is 20 mm and diameter at 3 is 30 mm, litres If the 1 (i) Calculate the velocity of the water at 1 (ii) Calculate the velocity of the water at 2 or 3. (iii) Calculate the flow rates...
1) Consider the schematic diagram below. If the pump supplies 225kW to the water, what flow rate will occur in the pipes? Pump 1 has length 450m and diameter 200mm. Pipe Π has length of 450m and diameter of 250mm. Assume a friction factor of f-0.02 for both pipes. gnore all minor losses and the losses in the pipe upstream of the pump. (ans. Q,-0.1 m3/s, Q1-0.175m3/s) RL-90m RL=30m >Pipe Pump Water Pipe II
1) Consider the schematic diagram below....
fluid mechanics
ASAP please
Problem 4 (50 points) Water is discharged from a reservoir at a rate of 18.103 m3/s using two horizontal cast iron pipes connected in series and a pump between them. The first pipe is 20 m long and has a 6-cm diameter, while the second pipe is 35 m long and has a 4-cm diameter. The water level in the reservoir is 30 m above the centerline of the pipe. The pipe entrance is sharp-edged. Losses...
0.5 in 10-72. The copper pipe system, which transports water at 70°F, consists of two branches. The pipe for branch ABC has a diameter of 0.5 in. and length of 8 ft, whereas the pipe for branch ADC has a diameter of 1 in. and length of 30 ft. If a pump provides an inlet flow at A of 67.3 gal/min, determine the flow in gal/min through each branch. Take e-80(10-6) ft. The system is in the horizontal plane. Include...
A pipe caring water with volumetric flow rate 0.6 m3/s branches into five pipes. The first pipe is (diameter=33Cm and velocity=1.3m/s), the second pipe is (diameter=32Cm), the third pipe is (diameter=26Cm and velocity=1.8m/s), the fourth pipe is (diameter=28Cm and velocity=2.2m/s), while the fifth pipe is (diameter=25Cm and velocity=2m/s). Find the velocity in the second pipe. Density of water=1000kg/m3. Select one: O a. 1.982 m/s Ob. 1.883 m/s O c. 2.014 m/s O d. 2.121 m/s O e. 2.231 m/s
Water at 20° flows in pipeline system shown below (Fig. 1) at rate of 32400 Vhr. Pipe 1 is 15m long and 0.044 m outer diameter and pipe 2 is 100m long and 0.034m outer diameter. The thickness of both pipes is 2mm. Pipe 1 is a ductile iron uncoated pipe and pipe 2 is ductile iron coated pipe. There are totally 4 elbows in the system (two elbows in each pipe) and the elbows are 90° street elbows. All...
A centrifugal pump test yields the following data: Pump Head Flow (m)(L/min) 30 25 20 40 The pump curve can be approximated by a parabola. This pump draws water from a large reservoir. The discharge of the pump feeds 150 m of 1.5 cm inside diameter pipe and then 225 m of 3 cm inside diameter pipe.. The two pipes both have a roughness of 0.5 mm The 3 cm pipe discharges to atmosphere a distance 40 m below the...
Water at 20° flows in pipeline system shown below (Fig.1) at rate of 32400 1hr. Pipe 1 is 15m long and 0.044 m outer diameter and pipe 2 is 100m long and 0.034m outer diameter. The thickness of both pipes is 2mm. Pipe 1 is a ductile iron uncoated pipe and pipe 2 is ductile iron coated pipe. There are totally 4 elbows in the system (two elbows in each pipe) and the elbows are 90° street elbows. All pipes...
CHE 3315 FLUID MECHANICS PROBLEM SHEET 5: MASS CONSERVATION AND FLOW RATE 1. Determine the mass flow rate of air having a temperature of 20C and gauge pressure 80 kPa as it flows through a circular duct 400 mm in diameter with an average velocity of 3 m/s. The gas specific constant R 286.9 JK /kg 2. Determine the average velocity of the steady flow at one outlet of a T- junction if the inlet flow speed is 6 m/s...
Basics of Fluid Mechanics 2. Example 1-5 For the Y-branch shown, water enters the pipe section at 15 velocities in both branches 2 and 3 are the same and the diameter of the pipe at is 50 mm, diameter at 2 is 20 mm and diameter at 3 is 30 mm, litres If the 1 (i) Calculate the velocity of the water at 1 (ii) Calculate the velocity of the water at 2 or 3. (iii) Calculate the flow rates...
Most questions answered within 3 hours.
-
A 1,150 lumen light bulb is placed 37 cm in front of a mirrored
wall, whose...
asked 2 minutes ago -
Given that z is a standard normal random variable, compute the
following probabilities (to 4 decimals)....
asked 8 minutes ago -
You begin preparation of the calibration curve to measure
absorbance vs concentration of FeSCN2+. To do...
asked 26 minutes ago -
When you speak after breathing helium, in which the speed of
sound is much greater than...
asked 18 minutes ago -
3. Stock Valuation: You are the CEO of Under Armour, Inc. and
are thinking about how...
asked 23 minutes ago -
Choose a brand. Critique the brand in terms of its brand
positioning, brand identity and brand...
asked 25 minutes ago -
A vertical curve has grades G1 = 2.8% (downgrade) and
G2 = 2.2 (upgrade) Assume design...
asked 26 minutes ago -
(a) Derive planar density expressions for BCC
(110) plane in terms of the atomic radius R....
asked 21 minutes ago -
I have this problem now and I am not sure what we are exactly
supposed to...
asked 27 minutes ago -
Use the following set of observed frequencies to test the
independence of the two variables. Variable...
asked 50 minutes ago -
Two kg of ice at -15 °C are placed in a 2 kg bath of water...
asked 50 minutes ago -
Describe the following with suitable
examples.
1- Security Policy Heterogeneity
2-Security Model Heterogeneity
3-Security Mechanism Heterogeneity...
asked 51 minutes ago