Sulphuric acid is flowing through a 2.5 inch diameter and 50ft long pipe with a velocity...
Sulphuric acid is flowing through a 2.5 inch diameter and 50ft long pipe with a velocity of 0.006 m3 /s. The sulphuric acid has a viscosity of 25 mN.s/m2 and density of 1680 kg/m3 while the roughness of the pipe surface is 1.3 mm. If the operating temperature is 290K, determine fluid flow (examples turbulent, laminar or others).
Homework Answers
Add Answer to:
Sulphuric acid is flowing through a 2.5 inch diameter and 50ft
long pipe with a velocity...
Sulphuric acid is flowing through a pipe (2.5 inch diameter, 50 ft length) in a velocity...
Sulphuric acid is flowing through a pipe (2.5 inch diameter, 50 ft length) in a velocity of 0.006 m3 /s. The sulphuric acid has a viscosity of 25 mN.s/m2 and density of 1680 kg/m3 while the roughness of the pipe surface is 1.3 mm. If the operating temperature is 290K, determine fluid flow (i.e. laminar, turbulent or others). (Given that 1 m = 39.37 inch).
Question (a) Sulphuric acid is flowing through a pipe (2.5 inch diameter, 50 ft length) in...
Question (a) Sulphuric acid is flowing through a pipe (2.5 inch diameter, 50 ft length) in a velocity of 0.006 m2/s. The sulphuric acid has a viscosity of 25 mN.s/m² and density of 1680 kg/m² while the roughness of the pipe surface is 1.3 mm. If the operating temperature is 290K, determine fluid flow (i.e. laminar, turbulent or others). (Given that 1 m= 39.37 inch) (b) Define pump, suction head, impelling head and the total head of a pump. (c)...
Q 3 Ninety-eight per cent sulphuric acid is pumped at 4.5 tonne/hour through a 25 mm diameter pip...
Q 3 Ninety-eight per cent sulphuric acid is pumped at 4.5 tonne/hour through a 25 mm diameter pipe, 30 m long to a reservoir 12 m higher than the feed point. Calculate the pressure drop in the pipeline. It is given that the viscosity of acid is 25 mN.s/m2 and the density of acid is 1840 kg/m3 and the roughness of the pipe is 0.05mm. Recalculate the pressure drop if the roughness of the pipe is 0.5 mm.
Q 3...
Water flows from left reservoir to right reservoir in a 5 cm diameter pipe system as...
Water flows from left reservoir to right reservoir in a 5 cm diameter pipe system as shown in the figure. The pipe is made out oftast iron which has a sand roughness of 0.26 mm. Discharge in the pipe system is given as 0.006 m3/s. Dynamic viscosity of water is 1.3 x 103 kg/m.s. Density of water is 1000 kg/m3 Flow in the pipe is ? water 9 m 17 4 m 80 m Laminar Turbulent Transition None of the...
H2.3 Consider water at 20°C flowing through a horizontal pipe of diameter 15 cm and length 10 m. ...
H2.3 Consider water at 20°C flowing through a horizontal pipe of diameter 15 cm and length 10 m. The flowrate is 0.021 m3/s and the wall shear stress is 5.76 N/m2. Assume fully developed flow. a. Verify that the flow is turbulent b. Determine the pressure drop [N/m2 c. Estimate the viscous sublayer thickness [mm], i.e., where y+ 5 d. Compare results of part c. with typical pipe roughness (see Table 8.1 in text and comment on implication e. Using...
ater (density 1000 kg/m3, viscosity 0.001 N-s/m2) flows from a large reservoir through straight pipe into the atmosphere at a flowrate of 2.5 m3/s. The reservoir is pressurized to 200 kPa (gage)....
ater (density 1000 kg/m3, viscosity 0.001 N-s/m2) flows from a large reservoir through straight pipe into the atmosphere at a flowrate of 2.5 m3/s. The reservoir is pressurized to 200 kPa (gage). The pipe has a diameter of 0.5 m and absolute roughness of 0.1 mm. The pipe also contains a turbine that has an efficiency of 0.6. si A) Is the flow in the pipe laminar or turbulent? (3 pts) B) What is the power transmitted from the turbine...
40 N"s/m2 and ?-1000 kg/m3 is flowing through a circular pipe umetric flow rate (Q) of...
40 N"s/m2 and ?-1000 kg/m3 is flowing through a circular pipe umetric flow rate (Q) of the oil is 1*10 m'/s, determine: 1) (2096) Oil with viscosity of with diameter D 0 0.1 m. If the volu a. b. If the flow is laminar or turbulent Th e pressure drop over a 20 m length of p ipe in kPa
Q5 A process fluid is flowing with a velocity of 4 m/s in a steel pipe...
Q5 A process fluid is flowing with a velocity of 4 m/s in a steel pipe having a diameter of 187 mm and a length of 1 m and maintaining the pipe surface temperature of 96.C. The fluid is entering the pipe at a temperature of 25 C and leaving with a temperature of 76C, take Prandtl number as 12. The density and viscosity of the fluid are 1210 kg/m?, 1 x10Ns/m respectively and its thermal conductivity is 5x102 w/mk....
1) 2) 3) Oil flows through an 8-inch diameter pipe with a velocity of 18 ft/s....
1)
2)
3)
Oil flows through an 8-inch diameter pipe with a velocity of 18 ft/s. If it discharges into the atmosphere through the nozzle, determine the total force the bolts must resist at the connection AB to hold the nozzle onto the pipe. Assume Yo = 55 lb/ft3. (30 pts) 8 in. 4 in. 18 m/s 06 PROB011 Research is being conducted on a medical specimen. They are trying to determine the pressure drop in fluid carrying vessels. If...
Water flows from left reservoir to right reservoir in a 5 cm diameter pipe system as...
Water flows from left reservoir to right reservoir in a 5 cm diameter pipe system as shown in the figure. The pipe is made out of cast iron which has a sand roughness of 0.26 mm Discharge in the pipe system is given as 0.006 m/s. Dynamic viscosity of water is 1.3 x 103 kg/ms. Density of water is 1000 kg/m2 Determine the friction factor? water 9 m 4 m 80 m 0.011 0.021 0.031 0.041
Question (a) Sulphuric acid is flowing through a pipe (2.5 inch diameter, 50 ft length) in a velocity of 0.006 m2/s. The sulphuric acid has a viscosity of 25 mN.s/m² and density of 1680 kg/m² while the roughness of the pipe surface is 1.3 mm. If the operating temperature is 290K, determine fluid flow (i.e. laminar, turbulent or others). (Given that 1 m= 39.37 inch) (b) Define pump, suction head, impelling head and the total head of a pump. (c)...
Q 3 Ninety-eight per cent sulphuric acid is pumped at 4.5 tonne/hour through a 25 mm diameter pipe, 30 m long to a reservoir 12 m higher than the feed point. Calculate the pressure drop in the pipeline. It is given that the viscosity of acid is 25 mN.s/m2 and the density of acid is 1840 kg/m3 and the roughness of the pipe is 0.05mm. Recalculate the pressure drop if the roughness of the pipe is 0.5 mm.
Q 3...
Water flows from left reservoir to right reservoir in a 5 cm diameter pipe system as shown in the figure. The pipe is made out oftast iron which has a sand roughness of 0.26 mm. Discharge in the pipe system is given as 0.006 m3/s. Dynamic viscosity of water is 1.3 x 103 kg/m.s. Density of water is 1000 kg/m3 Flow in the pipe is ? water 9 m 17 4 m 80 m Laminar Turbulent Transition None of the...
H2.3 Consider water at 20°C flowing through a horizontal pipe of diameter 15 cm and length 10 m. The flowrate is 0.021 m3/s and the wall shear stress is 5.76 N/m2. Assume fully developed flow. a. Verify that the flow is turbulent b. Determine the pressure drop [N/m2 c. Estimate the viscous sublayer thickness [mm], i.e., where y+ 5 d. Compare results of part c. with typical pipe roughness (see Table 8.1 in text and comment on implication e. Using...
ater (density 1000 kg/m3, viscosity 0.001 N-s/m2) flows from a large reservoir through straight pipe into the atmosphere at a flowrate of 2.5 m3/s. The reservoir is pressurized to 200 kPa (gage). The pipe has a diameter of 0.5 m and absolute roughness of 0.1 mm. The pipe also contains a turbine that has an efficiency of 0.6. si A) Is the flow in the pipe laminar or turbulent? (3 pts) B) What is the power transmitted from the turbine...
40 N"s/m2 and ?-1000 kg/m3 is flowing through a circular pipe umetric flow rate (Q) of the oil is 1*10 m'/s, determine: 1) (2096) Oil with viscosity of with diameter D 0 0.1 m. If the volu a. b. If the flow is laminar or turbulent Th e pressure drop over a 20 m length of p ipe in kPa
Q5 A process fluid is flowing with a velocity of 4 m/s in a steel pipe having a diameter of 187 mm and a length of 1 m and maintaining the pipe surface temperature of 96.C. The fluid is entering the pipe at a temperature of 25 C and leaving with a temperature of 76C, take Prandtl number as 12. The density and viscosity of the fluid are 1210 kg/m?, 1 x10Ns/m respectively and its thermal conductivity is 5x102 w/mk....
1)
2)
3)
Oil flows through an 8-inch diameter pipe with a velocity of 18 ft/s. If it discharges into the atmosphere through the nozzle, determine the total force the bolts must resist at the connection AB to hold the nozzle onto the pipe. Assume Yo = 55 lb/ft3. (30 pts) 8 in. 4 in. 18 m/s 06 PROB011 Research is being conducted on a medical specimen. They are trying to determine the pressure drop in fluid carrying vessels. If...
Water flows from left reservoir to right reservoir in a 5 cm diameter pipe system as shown in the figure. The pipe is made out of cast iron which has a sand roughness of 0.26 mm Discharge in the pipe system is given as 0.006 m/s. Dynamic viscosity of water is 1.3 x 103 kg/ms. Density of water is 1000 kg/m2 Determine the friction factor? water 9 m 4 m 80 m 0.011 0.021 0.031 0.041
Most questions answered within 3 hours.
-
An unknown amount of a compound with a molecular mass of 284.04
g/mol is dissolved in...
asked 2 minutes ago -
You are at rest at a stop sign. There is another stop sign that
is 100...
asked 2 minutes ago -
Calculate the equilibrium electrode potential for Fe3+/Fe2+
redox system, if the initial concentration of Fe2+ is...
asked 6 minutes ago -
Describe in detail with graph and diagram how bonding force,
bonding curves and bonding energy at...
asked 23 minutes ago -
Gingerbread cookies become inedible if not eaten quickly enough.
Clarence is trying to determine how many...
asked 18 minutes ago -
A
crane lifts a 200 kg block a height of 10 m in 18 seconds. What...
asked 22 minutes ago -
A 12.0-g bullet is fired horizontally into a 115-g wooden block
that is initially at rest...
asked 22 minutes ago -
Which DNA primer would have the HIGHEST melting temperature?
Question 17 options:
a)
GCATCGGC
b)
AATCGGAT...
asked 30 minutes ago -
what is the charge on the chromium ion in Cr2O3.
a -3
b -2
c 0...
asked 30 minutes ago -
which of the following may lead to speciation?
a. a group of individuals from a mainland...
asked 35 minutes ago -
Please I need today answer for This question and it is very
important and I need...
asked 54 minutes ago -
Five years from today, you plan to invest $3,700 for 7
additional years at 5.8 percent...
asked 54 minutes ago