final percentage = 25+1.89 = 26.89 litres
thus % = (26.89/50) X 100 =53.8 %
Help with 2 please A 50 liter tank contains a water-vapor mixture at 150 C with...
with clear steps please Problem #6 A rigid tank contains initially saturated water mixture at 205 °C with a quality of 50%. Heat is added until the final temperature is 250 °C. Describe the phase at the final state and draw the process on a T-v diagram.
Needh help with this A 200-m' rigid tank is filled with saturated liquid-vapor mixture of water at 50°C. If 10% of the mass is liquid and the rest is vapor, find the total mass in the tank. If heat is added in and the mixture becomes saturated vapor, find the pressure.
Problem 5(25 points) A rigid tank initially contains a partition that separates water at two different states. One side of the partition initially contains 4.5 lbm of steam at 150 psia and 600°F. The other side of the partition contains 7 lbm of saturated liquid 25 percent. The pressure at the final state is 50 psia. -vapor mixture at 300°F with a vapor mass fraction of partition is removed, and mixing occurs until equilibrium is established. The a) b) Determine...
A rigid tank contains a two-phase mixture of water and steam at a quality of 0.65 and a pressure of 20 psia. The mass of the mixture is 0.26 lbm. The mixture is heated until the final quality is 0.95. Compute the final pressure and the heat added. Please show formulas. This will help tremendously.
PLEASE EXPLAIN HOW TO APPROACH THIS PROBLEM, DO NOT SOLVE. THANK YOU. A rigid tank initially contains a partition that separates water two different states. One side of the partition initially contain 4.5 lbm of steam at 150 psia and 600 ºF . The other side of the partition contains 7 lbm of saturated liquid-vapor mixture at 300 ºF with a vapor mass fraction of 25 %. The partition is removed, and mixing occurs until equilibrium is established. The pressure...
A well-insulated rigid tank contains 5.80 kg of a saturated liquid-vapor mixture of water at 225 kPa. Initially, one-quarter of the mass in the liquid phase. An electric resistor placed in the tank is connected to 240-V source, and a current of 6 A flows through the resistor when the switch is turned on. Determine how long it will take to vaporize all the liquid in the tank in minute.
In a well-insulated rigid tank which contains 2 kg of a saturated liquid-vapor mixture of water at 200 kPa, 40% of the mass is in the liquid phase. A heater is providing heat to the content of the tank so that all liquid phase converts to vapor phase. Calculate the entropy change of water in this process.
A well-insulated rigid tank contains 2 kg of a saturated liquid-vapor mixture of water at 100 kPa. Initially, three-quarters of the mass is in the liquid phase. An electric resistance heater placed in the tank is now turned on and kept on until all the liquid in the tank is vaporized. Determine the entropy change of the steam during this process. Answer: 8.10 kJ/K Analysis From the steam tables (Tables A-4 through A-6)
A water-vapor mixture with a mass of 0.5 kg of at a quality of 50% is initially contained in a piston-cylinder assembly. The piston is unrestrained and it is weighted such that it maintains a constant pressure of 500 kPa inside the cylinder. Heat is transferred to the cylinder from a thermal energy source until the steam reaches saturated vapor conditions. Determine: (a) the total heat transfer, (b) the total amount of entropy production for the entire process, (c) Indicate...
Ignore anything handwritten Problem 2 (50 points) A closed rigid tank contains of a two-phase liquid-vapor mixture of water, with a mass of 1 kg quality of x,-0.75, and a pressure of pi = 40 kPa (State 1 ). The system is heated in a constant- volume process till the pressure reaches p2-100 kPa (State 2) Sa) Determine the temperature, T, in "C, specific volume, Pi in m'/kg, and specific internal energy, ul, in kJ/kg at state 1; (12.5 points)...