The soil profile consists of 15 feet of sand (=105 pcf) over 10 feet of organic...
The soil profile consists of 15 feet of sand (
=105
pcf) over 10 feet of organic silt (=100
pcf) over a highly plastic intact shale.
The water table is located at 10 feet underneath the ground surface.
A highway embankment is expected to apply a pressure of 1000 psf to the surface of the soil profile.
Compute the settlement resulting from consolidation of the organic silt after 30 years.
Homework Answers
Add Answer to:
The soil profile consists of 15 feet of sand (=105
pcf) over 10 feet of organic...
(5 points) 6. A soil profile consists of 4 ft of organic soil (a 75 pe)...
(5 points) 6. A soil profile consists of 4 ft of organic soil (a 75 pe) over a uniform soft clay layer. For the clay y 120 pcf and, ?'/o 1.0 The water table is at the ground surface. For a clay element A, at the depth of 10 feet from the ground surface (6 feet into the soft clay) compute the following Assume a wide fill, thickness 7 feet, ? 105 pcf is placed over the surface of the...
In the figure below, the natural soil profile consists of sand overlying clay overlying sand overlying bedrock. A water...
In the figure below, the natural soil profile consists of sand
overlying clay overlying sand overlying bedrock. A
water table is present 1 m beneath the surface of the natural
ground. If 4 m of consistent fill material (γfill = 15
kN/m3) was placed on top of this soil profile that covered a
large area, determine:
(a) The consolidation settlement of the clay layer (using 4
equal layers in your calculation), and
(b) The time (in days) for this consolidation...
1. (25 points) The soil profile at a site consists of a layer of fine sand...
1. (25 points) The soil profile at a site consists of a layer of fine sand 5 m thick above a layer of clay 4 m thick. Below the clay is a layer of impermeable rock. The groundwater table was observed at 2 m below ground level. The unit weight of the sand above and below the water table is 20 KN/m'. The water content of the clay is 25% and its dry unit weight is 15 KN/m'. The compression...
Example 2:3 The soil profile at a site consists of a 3 m thick sand layer...
Example 2:3 The soil profile at a site consists of a 3 m thick sand layer (Ybulk -16.5 kN/m3 sat18.5 kN/m3) underlain by a 6 m thick clay layer (w-27%, Gs-270, m,-0.31 MPa", cv-2.6 m2/year), which is underlain by a gravel layer. A 3 m compacted fill with a unit weight of 20 kN/m3 is to be placed at ground level. a. What would be the final consolidation settlement? b. How long will it take for 50 mm of consolidation...
The figure below shows a flexible rectangular raft foundation that is proposed for one of the...
The figure below shows a flexible rectangular raft foundation
that is proposed for one of the industrial buildings at the site.
The foundation is 10 feet X 20 feet and applies an uniform pressure
of 3000 psf to the underlying soil.
a. Using the influence factor method to calculate the stress
below a rectangular area, find the vertical stress increase
()
at 6 feet below points A, B, and C.
b. Assume that this foundation (thickness = 1.25 feet,
Ef...
A soil profile consists of a clay layer underlain by a sand layer, as shown in...
A soil profile consists of a clay layer underlain by a sand layer, as shown in figure. If a tube is inserted into the bottom sand layer and the water level rises to 1m above the ground surface, determined the vertical effective stresses and porewater pressures at A, B, and C. if ko is 0.5, determine the effective and total lateral stresses at A, B, and C. what is the value of the value of the porewater pressure at A...
Problem 7 The soil profile at a site consists of a top 4 m layer of...
Problem 7 The soil profile at a site consists of a top 4 m layer of dense sand followed by 2 m of clay, which is underlain by a stiff stratum. The water table is at 2 m below the ground level. The following data was obtained from a consolidation test on an undisturbed sample obtained from the middle of the clay layer: water content 5 36%, specific gravity of the clay grains = 2.72, compression index = 0.72, recompression...
geotechnical engineering The soil profile at a site consists of a clay layer 10 m thick,...
geotechnical engineering
The soil profile at a site consists of a clay layer 10 m thick, sandwich between two sand layers. The top sand layer has a density of 1.9 Mg/m² and is 5 m thick. Below this layer is a 10 m thick clay layer with a saturated density of 1.8 Mg/m' and a saturated water content 42%. The deeper sand layer has a saturated density of 1.9 Mg/m² and extend to the depth investigated at the site. The...
[Problems 1-4] The soil profile at a site for a proposed office building consists of a...
[Problems 1-4] The soil profile at a site for a proposed office building consists of a layer of fine sand 10.4 m thick above a layer of soft, normally consolidated clay 2 m thick. Below the soft clay is a deposit of coarse sand. The groundwater table was observed at 3 m below ground level. The void ratio of the sand is 0.76, and the water content of the clay is 43%. The building will impose a vertical stress increase...
2.) THE SOIL PROFILE SHOWS CONSISTS OF A LAYER OF DRY SAND 4m HICK WHICH OVERLIES...
2.) THE SOIL PROFILE SHOWS CONSISTS OF A LAYER OF DRY SAND 4m HICK WHICH OVERLIES A LAYER OF CLAY HAVING A THICKNESS OF 6m. GROUND WATER TABLE IS LOCATED AT THE INTERFACE OF THE SAND AND CLAY a.) COMPUTE THE EFFECTIVE STRESS AT THE BOTTOM OF THE CLAY LAYER b..) IF THE WATER TABLE RISES BY 2m, DETERMINE THE EFFECTIVE STRESS AT THE BOTTOM OF THE CLAY LAYER c.) IF THE WATER TABLE LOWERS BY 2m, DETERMINE THE EFFECTIVE...
(5 points) 6. A soil profile consists of 4 ft of organic soil (a 75 pe) over a uniform soft clay layer. For the clay y 120 pcf and, ?'/o 1.0 The water table is at the ground surface. For a clay element A, at the depth of 10 feet from the ground surface (6 feet into the soft clay) compute the following Assume a wide fill, thickness 7 feet, ? 105 pcf is placed over the surface of the...
In the figure below, the natural soil profile consists of sand
overlying clay overlying sand overlying bedrock. A
water table is present 1 m beneath the surface of the natural
ground. If 4 m of consistent fill material (γfill = 15
kN/m3) was placed on top of this soil profile that covered a
large area, determine:
(a) The consolidation settlement of the clay layer (using 4
equal layers in your calculation), and
(b) The time (in days) for this consolidation...
1. (25 points) The soil profile at a site consists of a layer of fine sand 5 m thick above a layer of clay 4 m thick. Below the clay is a layer of impermeable rock. The groundwater table was observed at 2 m below ground level. The unit weight of the sand above and below the water table is 20 KN/m'. The water content of the clay is 25% and its dry unit weight is 15 KN/m'. The compression...
Example 2:3 The soil profile at a site consists of a 3 m thick sand layer (Ybulk -16.5 kN/m3 sat18.5 kN/m3) underlain by a 6 m thick clay layer (w-27%, Gs-270, m,-0.31 MPa", cv-2.6 m2/year), which is underlain by a gravel layer. A 3 m compacted fill with a unit weight of 20 kN/m3 is to be placed at ground level. a. What would be the final consolidation settlement? b. How long will it take for 50 mm of consolidation...
The figure below shows a flexible rectangular raft foundation
that is proposed for one of the industrial buildings at the site.
The foundation is 10 feet X 20 feet and applies an uniform pressure
of 3000 psf to the underlying soil.
a. Using the influence factor method to calculate the stress
below a rectangular area, find the vertical stress increase
()
at 6 feet below points A, B, and C.
b. Assume that this foundation (thickness = 1.25 feet,
Ef...
Problem 7 The soil profile at a site consists of a top 4 m layer of dense sand followed by 2 m of clay, which is underlain by a stiff stratum. The water table is at 2 m below the ground level. The following data was obtained from a consolidation test on an undisturbed sample obtained from the middle of the clay layer: water content 5 36%, specific gravity of the clay grains = 2.72, compression index = 0.72, recompression...
geotechnical engineering
The soil profile at a site consists of a clay layer 10 m thick, sandwich between two sand layers. The top sand layer has a density of 1.9 Mg/m² and is 5 m thick. Below this layer is a 10 m thick clay layer with a saturated density of 1.8 Mg/m' and a saturated water content 42%. The deeper sand layer has a saturated density of 1.9 Mg/m² and extend to the depth investigated at the site. The...
[Problems 1-4] The soil profile at a site for a proposed office building consists of a layer of fine sand 10.4 m thick above a layer of soft, normally consolidated clay 2 m thick. Below the soft clay is a deposit of coarse sand. The groundwater table was observed at 3 m below ground level. The void ratio of the sand is 0.76, and the water content of the clay is 43%. The building will impose a vertical stress increase...
2.) THE SOIL PROFILE SHOWS CONSISTS OF A LAYER OF DRY SAND 4m HICK WHICH OVERLIES A LAYER OF CLAY HAVING A THICKNESS OF 6m. GROUND WATER TABLE IS LOCATED AT THE INTERFACE OF THE SAND AND CLAY a.) COMPUTE THE EFFECTIVE STRESS AT THE BOTTOM OF THE CLAY LAYER b..) IF THE WATER TABLE RISES BY 2m, DETERMINE THE EFFECTIVE STRESS AT THE BOTTOM OF THE CLAY LAYER c.) IF THE WATER TABLE LOWERS BY 2m, DETERMINE THE EFFECTIVE...
Most questions answered within 3 hours.
-
Blue Spruce Corp. owns equipment that cost $63,400 when
purchased on January 1, 2017. It has...
asked 9 minutes ago -
A lottery exists where balls numbered 1 to 17 are placed in an
urn. To win,...
asked 1 hour ago -
Please explain steps:
An 80 kg swimmer steps off a platform 10 m above the water...
asked 1 hour ago -
26) Briefly describe, using words or simple diagrams, the
chemiosmotic theory for coupling oxidation to phosphorylation...
asked 3 hours ago -
Suppose that XX is a random variable with mean 16 and standard
deviation 5 . Also...
asked 4 hours ago -
Calculate the number density of argon gas at a temperature of
24C and a pressure of...
asked 7 hours ago -
Alternative
Classification
How to Estimate
Probabilities from Data? ( For continuous Attributes)
And How to generate...
asked 7 hours ago -
An explosion breaks a 20.0-kg object into three parts. The
object is initially moving at a...
asked 8 hours ago -
Calculate the approximate number of residues of Rubisco, which
is involved in carbon fixation in plants,...
asked 9 hours ago -
Other decisions about scientific claims can have a much broader
impact.ENERGYarrow-10x10.png, environment, health, security - all...
asked 10 hours ago -
I need to write a research paper and work cited about this
topic: The United States...
asked 10 hours ago -
Hello! I was wondering if I could have some help?
If the vapor pressure of carvone...
asked 10 hours ago