Homework Answers
feel free to reach out to me through
comment section if any doubt comes, and if you like my work then
please thumbs up
Add Answer to:
1. (25 points) The soil profile at a site consists of a layer of fine sand...
Problem 7 The soil profile at a site consists of a top 4 m layer of...
Problem 7 The soil profile at a site consists of a top 4 m layer of dense sand followed by 2 m of clay, which is underlain by a stiff stratum. The water table is at 2 m below the ground level. The following data was obtained from a consolidation test on an undisturbed sample obtained from the middle of the clay layer: water content 5 36%, specific gravity of the clay grains = 2.72, compression index = 0.72, recompression...
[Problems 1-4] The soil profile at a site for a proposed office building consists of a...
[Problems 1-4] The soil profile at a site for a proposed office building consists of a layer of fine sand 10.4 m thick above a layer of soft, normally consolidated clay 2 m thick. Below the soft clay is a deposit of coarse sand. The groundwater table was observed at 3 m below ground level. The void ratio of the sand is 0.76, and the water content of the clay is 43%. The building will impose a vertical stress increase...
The ground profile of a construction site consists of a 3 m thick layer of sand...
The ground profile of a construction site consists of a 3 m thick layer of sand followed by a 2 m thick layer of clay lying on impervious bedrock. The water table is at a depth of 2 m below the ground surface. The sand has a dry unit weight of 16 kN/m3 and a saturated unit weight of 18 kN/m3. The capillary rise in the sand is 0.5 m. The clay has a bulk unit weight of 19 kN/m3....
Example 2:3 The soil profile at a site consists of a 3 m thick sand layer...
Example 2:3 The soil profile at a site consists of a 3 m thick sand layer (Ybulk -16.5 kN/m3 sat18.5 kN/m3) underlain by a 6 m thick clay layer (w-27%, Gs-270, m,-0.31 MPa", cv-2.6 m2/year), which is underlain by a gravel layer. A 3 m compacted fill with a unit weight of 20 kN/m3 is to be placed at ground level. a. What would be the final consolidation settlement? b. How long will it take for 50 mm of consolidation...
In the figure below, the natural soil profile consists of sand overlying clay overlying sand overlying bedrock. A water...
In the figure below, the natural soil profile consists of sand
overlying clay overlying sand overlying bedrock. A
water table is present 1 m beneath the surface of the natural
ground. If 4 m of consistent fill material (γfill = 15
kN/m3) was placed on top of this soil profile that covered a
large area, determine:
(a) The consolidation settlement of the clay layer (using 4
equal layers in your calculation), and
(b) The time (in days) for this consolidation...
geotechnical engineering The soil profile at a site consists of a clay layer 10 m thick,...
geotechnical engineering
The soil profile at a site consists of a clay layer 10 m thick, sandwich between two sand layers. The top sand layer has a density of 1.9 Mg/m² and is 5 m thick. Below this layer is a 10 m thick clay layer with a saturated density of 1.8 Mg/m' and a saturated water content 42%. The deeper sand layer has a saturated density of 1.9 Mg/m² and extend to the depth investigated at the site. The...
The ground profile of a construction site consists of a 3 m thick layer of sand...
The ground profile of a construction site consists of a 3 m thick layer of sand followed by a 2 m thick layer of clay lying on impervious bedrock. The watertable is at a depth of 2 m below the ground surface. The sand has a dry unit weight of 16 kN/m and a saturated unit weight of 18 kN/m3. The capillary rise in sand is 0.5 m. The clay has a bulk unit weight of 19 kN/m 1. One...
Problem 2. [2596] Figure 2 shows a soil profile. The uniformly distributed load on the ground...
Problem 2. [2596] Figure 2 shows a soil profile. The uniformly distributed load on the ground surface is (1) Estimate the primary consolidation settlement of the clay layer due to the application of Ap. (2) If the clay layer is preconsolidated and the average preconsolidation pressure is 80 kPa, what will be the expected primary consolidation settlement if the recompression index is C 0.2 x Cc? p 87 kPa 1 m Dry Sand Sand: Saturated Sand Dry Unit weight: 14.6...
Q8 An oil tank, 20 m in diameter, is to be built on a site where the soil profile consists of 4 m of dense gravel overl...
Q8 An oil tank, 20 m in diameter, is to be built on a site where the soil profile consists of 4 m of dense gravel overlying 3 m of clay overlying rigid impermeable rock, and the water table is 1 m below the soil surface. If the tank applies a uniform pressure of 100 kPa to the surface of the soil calculate the differential settlement between the centre and perimeter of the tank after 1 year and after many...
Question 4 (20 marks): A 2-m thick normally-consolidated clay soil is resting on impermeable shale rock;...
Question 4 (20 marks): A 2-m thick normally-consolidated clay soil is resting on impermeable shale rock; a 20-m thick layer of sandy soil is placed on top of the clay to expedite consolidation process. The unit weight of the sand is 15 kN/m3 and the unit weight of the clay is 10 kN/m3. For the clay layer, the initial void ratio is 2.0, the compression index of the clay is Ce 0.40, the recompression index is C, - 0.10, and...
Problem 7 The soil profile at a site consists of a top 4 m layer of dense sand followed by 2 m of clay, which is underlain by a stiff stratum. The water table is at 2 m below the ground level. The following data was obtained from a consolidation test on an undisturbed sample obtained from the middle of the clay layer: water content 5 36%, specific gravity of the clay grains = 2.72, compression index = 0.72, recompression...
[Problems 1-4] The soil profile at a site for a proposed office building consists of a layer of fine sand 10.4 m thick above a layer of soft, normally consolidated clay 2 m thick. Below the soft clay is a deposit of coarse sand. The groundwater table was observed at 3 m below ground level. The void ratio of the sand is 0.76, and the water content of the clay is 43%. The building will impose a vertical stress increase...
Example 2:3 The soil profile at a site consists of a 3 m thick sand layer (Ybulk -16.5 kN/m3 sat18.5 kN/m3) underlain by a 6 m thick clay layer (w-27%, Gs-270, m,-0.31 MPa", cv-2.6 m2/year), which is underlain by a gravel layer. A 3 m compacted fill with a unit weight of 20 kN/m3 is to be placed at ground level. a. What would be the final consolidation settlement? b. How long will it take for 50 mm of consolidation...
In the figure below, the natural soil profile consists of sand
overlying clay overlying sand overlying bedrock. A
water table is present 1 m beneath the surface of the natural
ground. If 4 m of consistent fill material (γfill = 15
kN/m3) was placed on top of this soil profile that covered a
large area, determine:
(a) The consolidation settlement of the clay layer (using 4
equal layers in your calculation), and
(b) The time (in days) for this consolidation...
geotechnical engineering
The soil profile at a site consists of a clay layer 10 m thick, sandwich between two sand layers. The top sand layer has a density of 1.9 Mg/m² and is 5 m thick. Below this layer is a 10 m thick clay layer with a saturated density of 1.8 Mg/m' and a saturated water content 42%. The deeper sand layer has a saturated density of 1.9 Mg/m² and extend to the depth investigated at the site. The...
The ground profile of a construction site consists of a 3 m thick layer of sand followed by a 2 m thick layer of clay lying on impervious bedrock. The watertable is at a depth of 2 m below the ground surface. The sand has a dry unit weight of 16 kN/m and a saturated unit weight of 18 kN/m3. The capillary rise in sand is 0.5 m. The clay has a bulk unit weight of 19 kN/m 1. One...
Problem 2. [2596] Figure 2 shows a soil profile. The uniformly distributed load on the ground surface is (1) Estimate the primary consolidation settlement of the clay layer due to the application of Ap. (2) If the clay layer is preconsolidated and the average preconsolidation pressure is 80 kPa, what will be the expected primary consolidation settlement if the recompression index is C 0.2 x Cc? p 87 kPa 1 m Dry Sand Sand: Saturated Sand Dry Unit weight: 14.6...
Q8 An oil tank, 20 m in diameter, is to be built on a site where the soil profile consists of 4 m of dense gravel overlying 3 m of clay overlying rigid impermeable rock, and the water table is 1 m below the soil surface. If the tank applies a uniform pressure of 100 kPa to the surface of the soil calculate the differential settlement between the centre and perimeter of the tank after 1 year and after many...
Question 4 (20 marks): A 2-m thick normally-consolidated clay soil is resting on impermeable shale rock; a 20-m thick layer of sandy soil is placed on top of the clay to expedite consolidation process. The unit weight of the sand is 15 kN/m3 and the unit weight of the clay is 10 kN/m3. For the clay layer, the initial void ratio is 2.0, the compression index of the clay is Ce 0.40, the recompression index is C, - 0.10, and...
Most questions answered within 3 hours.
-
1. What is the main causal factor of Border line personality
disorder? Research has also found...
asked 3 seconds ago -
The National Institute of Standards and Technology (NIST)
supplies "standard materials" whose physical properties are
supposed...
asked 2 minutes ago -
Alpha Centauri A and B are Sun-like stars, and together they
form the binary star Alpha...
asked 3 minutes ago -
What is the pH of a 0.200 M solution of sulfurous acid? Given:
Ka1 = 1.70×10–2,...
asked 15 minutes ago -
Sociologists have conducted much interesting research on gender
stereotypes in American society. A curious aspect of...
asked 22 minutes ago -
1. Based on your results, calculate how many kilograms of plant
material you would need to...
asked 25 minutes ago -
Sample (taken every two minutes)
Angle of Rotation
0
102.9
2
104.2
4
106.2
6
104.8*...
asked 22 minutes ago -
Adrian's utilities of two consumption bundles are 50 and 100,
respectively. This implies that A. Adrian...
asked 32 minutes ago -
1. A 24.9 mL sample of 0.332 M
methylamine,
CH3NH2, is titrated with
0.264 M perchloric...
asked 33 minutes ago -
You're working as a security analyst for a small company that
doesn't have the resources of...
asked 38 minutes ago -
As the project manager of a large project, you have just
completed the Estimate Costs process....
asked 40 minutes ago -
Suppose that a budget equation is goven by p1x1 + p2x2
= m. The government decides...
asked 42 minutes ago