Air at 32oC is humidified by flowing over a 1.2 m long container filled with water....
gas is on top of liquid. 2. 24.5g water is in a container at 30.0L at 298.15 K. The vapor pressure of water at this temperature is 0.030 atm. The gas constant is 0.08206 L'atm/(mol-K). The density of water is 998 kg/m. The molar mass of water is 18.02 g/mol. a. What phases are present in this container At what volume would only the gas phase be present? b. At what volume would only liquid be present? C. 2. 24.5g...
Solve asap 3. During an experiment involving the flow of dry air at 30°C and 1 atm (101.325 kPa) at a free stream velocity of 5 m/s over a body covered with a layer of naphthalene. The incoming air is free of naphthalene, and thus the mass fraction of naphthalene in the free stream is zero (WAC). The vapor pressure of naphthalene at 30°C is 18.5 Pa and the diffusion coefficient of naphthalene in air at 30°C is 0.86 x...
PROBLEM A rigid tank with a volume of 2.4 m3 contains a moist air mixture having 2.7 kg of dry air at a dry bulb temperature of 26°C and a total pressure of 1 atm. Determine the relative humidity of the air, the mass of water vapor in the tank, and the internal energy of the air (in kilojoules).
A container filled with 45 kg of liquid water at 95°C is placed in a 90 m3 room that is initially at 12°C. Thermal equilibrium is established after a while as a result of heat transfer between the water and the air in the room. Using constant specific heats at room temperature, determine a) the final equilibrium temperature b) the amount of heat transfer between the water and the air in the room c) the entropy generation /3] I /8]...
Answer all parts complete to get 100% feedback!!! Problem 2 (30 Points A cylindrical container filled with liquid 225 kPa stored in a large room. The diameter of the the lido 25 kPa is initially aniline-free and the room temperature container is 45 cm. The ambient air is id of the container is removed and the aniline evaporates slowly. a ndfiusion coefficient of aniline in air. Use the empirical equation aniline diffusion has not reached steady state at 15 cm...
At 15 ◦C, the water vapor pressure is 12.79 mmHg. What is the maximum mass of water contained in 2.00·105 L of air at 15 ◦C? The molar mass of water is 18.015 g/mol, 1.00 atm = 760 mmHg, T(K) = T(◦C) + 273. (A) 49.26 kg (B) 2734 g (C) 2566 g (D) 151.8 g (E) 7.91 g
On a summer day, the air temperature is 36°C and the relative humidity is 20%. Water evaporates from the surface of a lake at a rate of 0.20 kg/h per square metre of water surface area. The temperature of water is 25°C. (a) Determine the mass transfer coefficient. (10 marks) (b) Determine the convective heat transfer coefficient. (10 marks) (c) Determine the net heat loss (in W/m2) from the lake. (5 marks) The specific volume of water vapour at 25°C...
Part 1. The air in a bicycle tire is bubbled through water and collected at 25∘C. If the total volume of gas collected is 5.60 L at a temperature of 25∘C and a pressure of 760 torr, how many moles of gas were in the bicycle tire? - Part 2. A 295-mL flask contains pure helium at a pressure of 755 torr . A second flask with a volume of 480 mL contains pure argon at a pressure of 714...
Required information Air at 25°C and 1 atm is flowing over a long flat plate with a velocity of 7 m/s. The density and kinematic viscosity of air at 1 atm and 25°C are p= 1.184 kg/m3 and V = 1.562x10-5 m2/s. Calculate the distance from the leading edge of the plate where the flow becomes turbulent. The distance from the leading edge of the plate is m. Required information Air at 25°C and 1 atm is flowing over a...
At the fluid dynamic laboratory, a group of engineers are doing a test. Air is at 300°K, 1 atm flows at 200 km/h over a flat surface 1 m long. The engineers consider the concentration of vapor in the air is negligible. The diffusion of water vapor into air is 0.5 x 10 m'/s Calculate the mass transfer coefficient of water vapor from the flat surface into the air. Properties of air at 300°K and I atmosphere are: 一ρ= 1.1778g/m'...