the rod which is attached to the bar is pin joint which work as point load due to thermal expansion
these images explains
but the point load is at mid of beam so deflection is 6.04*10^-4 meter
so change in length is 1.208*10^-3 m
Q5). (17 pts). The circular Brass rod having a an inner radius r 8 mm and...
of a brass core (diameter d, -8 mm) surrounded by a steel shell (inner diameter d2 8.75 mm, outer diameter d -10 mm), topped by a rigid cap. A load P compresses the core and shell, which have length L 120 mm. The moduli of elasticity of the brass and steel are Eb- 101 GPa and E 200 GPa, respectively. a) What load P will compress the assembly by 0.104 mm? b) If the compressive yield stress of the brass...
A 10 kg plate is suspended from a solid circular rod. The rod length is 3m, has a radius of 5 mm and a shear modulus of 75 GPa. The rod is fixed supported at the top. If the plate is rotated slightly and released determine the period of oscillation. b 0.3 mm a 0.2 m A 10 kg plate is suspended from a solid circular rod. The rod length is 3m, has a radius of 5 mm and a...
please help ASAP 1.5-7 A hollow, brass circular pipe ABC (oce figure supports a load P, 118 kN acting at the top A second load P -98 kN is uaiformly distributed around the cap plate at B. The diameters and thicknesses of the upper and lower parts of the pipe are 31 mm ,,-12 mm, dae" 57 mm, and tac· 9 mm, respectively. The modulus of clasticity is 96 GPa. When both loads are fully applied, the wall thickness of...
Question 1. (a) A steel tube having inner and outer dimeters of 1.5 in. and 2 in., respectively, is turning at 45 rev/min. If the allowable shear stress (Tallow) of the tube material is 10 ksi, determine the horse power (hp) transmitted by the tube. (20 points) (b) The A-36 solid steel shaft is 3.5 m long and has a diameter of 60 mm. The shaft is used to transmit a torque of T = 524 N-m from the engine...
Mechanics and Materials Help Question 1. (a) A steel tube having inner and outer dimeters of 1.5 in. and 2 in., respectively, is tuming at 45 rev/min. If the allowable shear stress (Tallow) of the tube material is 10 ksi, determine the horse power (hp) transmitted by the tube. (20 points) (b) The A-36 solid steel shaft is 3.5 m long and has a diameter of 60 mm. The shaft is used to transmit a torque of T = 524...
Question 1. (a) A steel tube having inner and outer dimeters of 1.5 in. and 2 in., respectively, is turning at 45 rev/min. If the allowable shear stress (Tallow) of the tube material is 10 ksi, determine the horse power (hp) transmitted by the tube. (20 points) (b) The A-36 solid steel shaft is 3.5 m long and has a diameter of 60 mm. The shaft is used to transmit a torque of T = 524 N·m from the engine...
2) Consider a coaxial cable with the outer conductor radius of 8 mm and inner conductor radius of 4 mm. Assume a 100 MHz signal. (a) Calculate the parameters R L' G and C" assuming that the conductors are Cu and the space between them is filled with a dielectric material of&r-3 and ơ-103 S/m. (b) From the parameters in (a) determine a, B, up and Zo for the line. (c) How far would a signal travel in this line...
Both parts please Question 1. (a) A steel tube having inner and outer dimeters of 1.5 in and 2 in., respectively, is turning at 45 rev/min. If the allowable shear stress (Tallow) of the tube material is 10 ksi, determine the horse power (hp) transmitted by the tube. (20 points) (b) The A-36 solid steel shaft is 3.5 m long and has a diameter of 60 mm. The shaft is used to transmit a torque of T-524 N-m from the...
13. (a) The cylindrical walls of a vessel of outer radius R and wall thickness (t <<R) are made of an isotropic linear elastic material with modulus E and Poisson's ratio v. The end caps are rigid. If the vessel is empty (zero gage pressure), the vessel fits precisely (without any stress) inside a rigid frictionless well. A pressurized fuel is introduced in the vessel so that the internal gage pressure in the vessel is now P. For these conditions...
Question 1 The motor shown in Fig. 1 supplies power to Gear C through solid steel motor shaft GF (having a diamet of 200 mm) and Gear F. The torque delivered to Gear C is 200 kNm. Gears A, B, D and E supply powers to er three machines. The torques delivered by gear A, gear B and gear E to the machines are 60 kNm, 30 kNm and 40 kNm, respectively. Shaft ABCDE is also made of steel (G...