Homework Answers
The inlet quality or vapor quality is given by
Here, this is 60 %
Now, a moisture separator removes the water present in the system.
(Saturated steam does not act like water molecules.)
Since 60% is saturated steam, the rest 40 % is moisture.
So, this will be removed.
The mass of steam-water mixture = 50 kg
40 % of this = 50*40/100 = 20 kg
So, the mass removed is 20 kg.
Add Answer to:
Question 6 1/1 point Given the following: A saturated steam-water mixture with an inlet quality of...
Question 4 Liquid water enters a feedwater heater at inlet 1 with inlet conditions 15 MPa,...
Question 4 Liquid water enters a feedwater heater at inlet 1 with inlet conditions 15 MPa, 40°C at 60 kg/s. Another stream of water in saturated mixture enters the heater at inlet 2 at temperature of 175 °C. The heater operates at steady state and heat transfer to surrounding can be neglected. At exit 3, saturated liquid flows out at 275 kPa. Select two (2) different values of mixture quality at inlet 2 between 0.5 and 0.8, and subsequently plot...
Saturated liquid-vapor mixture of water, called wet steam, in a steam line at 1500 kPa is...
Saturated liquid-vapor mixture of water, called wet steam, in a steam line at 1500 kPa is throttled to 50 kPa and 100 C. what is the quality in the steam line?
Question 4 Liquid water enters a feedwater heater at inlet 1 with inlet conditions 15 MPa,...
Question 4 Liquid water enters a feedwater heater at inlet 1 with inlet conditions 15 MPa, 40°C at 60 kg/s. Another stream of water in saturated mixture enters the heater at inlet 2 at temperature of 175 °C. The heater operates at steady state and heat transfer to surrounding can be neglected. At exit 3, saturated liquid flows out at 275 kPa. Select two (2) different values of mixture quality at inlet 2 between 0.5 and 0.8, and subsequently plot...
5. A 15 kg saturated steam has a pressure of 600 kPa and internal energy of...
5. A 15 kg saturated steam has a pressure of 600 kPa and internal energy of 24,725 K. (a) Determine the quality of the saturated steam. (b) Determine the enthalpy of the saturated steam. 6. Air at 600 K flows with 3 kg/s into a heat exchanger and out at 100'C. Determine the amount (kg/s) of water coming in at 100 kPa, 20°C that the air can heat to the boiling point and the heat transfer rate (in kW) from...
Liquid water enters a feedwater heater at inlet 1 with inlet condition ls 15 mpa, 40celcius...
Liquid water enters a
feedwater heater at inlet 1 with inlet condition ls 15 mpa,
40celcius at 60kg/s. Another stream of water in saturated mixture
enters the heater at inlet 2 at temperature of 175 celcius. The
heater operates at steady state and heat transfer to surrounding
can be neglected. At exit 3, saturated liquid flows out at 275 kpa.
Select two different values of mixture quality at inlet 2 between
0.5 and 0.8, and subsequently plot the mass flow...
1. (10 points) A saturated water mixture enters a separator, which divides the fluid into a...
1. (10 points) A saturated water mixture enters a separator, which divides the fluid into a stream of liquid water and saturated vapor: Vapor Inlet Pin Pvap exit SEPARATOR Liquid Pli exit The inlet mass flow rate is 0.6 kg/s, and its density, pin, is 450 kg/m3. At their respective exits, the liquid density, pliq, is 999 kg/m3, and the vapor density Pvap, is 0.62 kg/m3. All three passages have the same diameter, D, of 10 cm. During steady operation,...
please solve all of them awestion 3 (35 pts) water at Tjz1SC is heated in a chamber by mixing it with steam at paa300 kPaond TR320С The saturated liquid water and the steam enter the mibxing cham...
please solve all of them
awestion 3 (35 pts) water at Tjz1SC is heated in a chamber by mixing it with steam at paa300 kPaond TR320С The saturated liquid water and the steam enter the mibxing chamber through separate and independent inlet pipes. The saturated liquid water enters the mixing chamber at a rate of 3.0 kg/s, and the chamber loses heat to the surrounding air at 30 Cat a rate of 12 kW. The mixture leaves the mixing chamber...
A well-insulated rigid tank contains 2 kg of a saturated liquid-vapor mixture of water at 100 kPa
A well-insulated rigid tank contains 2 kg of a saturated liquid-vapor mixture of water at 100 kPa. Initially, three-quarters of the mass is in the liquid phase. An electric resistance heater placed in the tank is now turned on and kept on until all the liquid in the tank is vaporized. Determine the entropy change of the steam during this process. Answer: 8.10 kJ/K Analysis From the steam tables (Tables A-4 through A-6)
Fuel is burned in a boiler to produce saturated steam at 10.0 bar absolute pressure from...
Fuel is burned in a boiler to produce saturated steam at 10.0 bar absolute pressure from saturated liquid water at 10.0 bar absolute pressure. This H20 flows through tubes that run through the boiler, Energy released by combustion is transferred as heat through the walls of the tubes to convert the liquid water to steam at 10.0 bar. The fuel consists of 37 mol% ethane and 63 mol% acetylene, and is fed in the vapor phase at 50 °C and...
(1 point) A rigid, insulated 0.43 m tank initially contains saturated water liquid at 362 kPa....
(1 point) A rigid, insulated 0.43 m tank initially contains saturated water liquid at 362 kPa. The tank is connected to a steam pipe line carrying steam at 1.53 MPa and 305 °C through a valve. When the valve is opened, steam enters the tank from the pipe. When the valve is closed, the tank is filled with a saturated vapor with a pressure of 0.8 MPa. How much mass was added to the tank during this process?
Question 4 Liquid water enters a feedwater heater at inlet 1 with inlet conditions 15 MPa, 40°C at 60 kg/s. Another stream of water in saturated mixture enters the heater at inlet 2 at temperature of 175 °C. The heater operates at steady state and heat transfer to surrounding can be neglected. At exit 3, saturated liquid flows out at 275 kPa. Select two (2) different values of mixture quality at inlet 2 between 0.5 and 0.8, and subsequently plot...
Question 4 Liquid water enters a feedwater heater at inlet 1 with inlet conditions 15 MPa, 40°C at 60 kg/s. Another stream of water in saturated mixture enters the heater at inlet 2 at temperature of 175 °C. The heater operates at steady state and heat transfer to surrounding can be neglected. At exit 3, saturated liquid flows out at 275 kPa. Select two (2) different values of mixture quality at inlet 2 between 0.5 and 0.8, and subsequently plot...
5. A 15 kg saturated steam has a pressure of 600 kPa and internal energy of 24,725 K. (a) Determine the quality of the saturated steam. (b) Determine the enthalpy of the saturated steam. 6. Air at 600 K flows with 3 kg/s into a heat exchanger and out at 100'C. Determine the amount (kg/s) of water coming in at 100 kPa, 20°C that the air can heat to the boiling point and the heat transfer rate (in kW) from...
Liquid water enters a
feedwater heater at inlet 1 with inlet condition ls 15 mpa,
40celcius at 60kg/s. Another stream of water in saturated mixture
enters the heater at inlet 2 at temperature of 175 celcius. The
heater operates at steady state and heat transfer to surrounding
can be neglected. At exit 3, saturated liquid flows out at 275 kpa.
Select two different values of mixture quality at inlet 2 between
0.5 and 0.8, and subsequently plot the mass flow...
1. (10 points) A saturated water mixture enters a separator, which divides the fluid into a stream of liquid water and saturated vapor: Vapor Inlet Pin Pvap exit SEPARATOR Liquid Pli exit The inlet mass flow rate is 0.6 kg/s, and its density, pin, is 450 kg/m3. At their respective exits, the liquid density, pliq, is 999 kg/m3, and the vapor density Pvap, is 0.62 kg/m3. All three passages have the same diameter, D, of 10 cm. During steady operation,...
please solve all of them
awestion 3 (35 pts) water at Tjz1SC is heated in a chamber by mixing it with steam at paa300 kPaond TR320С The saturated liquid water and the steam enter the mibxing chamber through separate and independent inlet pipes. The saturated liquid water enters the mixing chamber at a rate of 3.0 kg/s, and the chamber loses heat to the surrounding air at 30 Cat a rate of 12 kW. The mixture leaves the mixing chamber...
Fuel is burned in a boiler to produce saturated steam at 10.0 bar absolute pressure from saturated liquid water at 10.0 bar absolute pressure. This H20 flows through tubes that run through the boiler, Energy released by combustion is transferred as heat through the walls of the tubes to convert the liquid water to steam at 10.0 bar. The fuel consists of 37 mol% ethane and 63 mol% acetylene, and is fed in the vapor phase at 50 °C and...
(1 point) A rigid, insulated 0.43 m tank initially contains saturated water liquid at 362 kPa. The tank is connected to a steam pipe line carrying steam at 1.53 MPa and 305 °C through a valve. When the valve is opened, steam enters the tank from the pipe. When the valve is closed, the tank is filled with a saturated vapor with a pressure of 0.8 MPa. How much mass was added to the tank during this process?
Most questions answered within 3 hours.
-
A single NEC SX-9 vector processor unit (VPU) has a peak
arithmetic
performance of 102.4 GFs/s....
asked 15 minutes ago -
. Determine the hourly multiplication factors
such that the total daily water consumption will equal 15,000...
asked 16 minutes ago -
A budgeting Web site reported that 35% of U.S. households have
withdrawn money from a 401(k)...
asked 15 minutes ago -
In this assignment, you will write a minimum two-page paper that
explains the treatment of internal...
asked 19 minutes ago -
Direct marketing is also referred to as Question 50 options: 1)
one-to-one marketing. 2) business-customer marketing....
asked 22 minutes ago -
INK Ltd is grocery retailer with 103 shops around South
Australia and Tasmania. The company has...
asked 27 minutes ago -
HOW BEER IS MADE
The beer making process is an art. It takes time, patience and...
asked 28 minutes ago -
What two methods could be used to purify the dimethyl
fumarate?
Based on the 12 Principles...
asked 37 minutes ago -
Reflect upon the readings and videos as well as our Media Monday
discussion. Integrating concepts from...
asked 42 minutes ago -
1. A cylindrical capacitor with A = 0.01, B = 0.1 and a length
of 5...
asked 49 minutes ago -
Explain how taking an SGLT-2 inhibitor, along with taking
insulin leads to ketoacidosis in people who...
asked 58 minutes ago -
Show the truth table of the
gates needed to control the PISO internal FF, has a...
asked 1 hour ago