I need help with finding this questions!
Thank You!!
Given overall efficiency of compound gear train 85% velocity ratio of 4:1
required speed = 184 rpm
we know that velocity ratio = input speed /output speed
so rotational speed required by motor = (4/1 )X required speed
rotational speed required by motor = 736 rpm
I need help with finding this questions! Thank You!! Figure 1 shows the rotary screen being...
Homework 6: The figure below shows a gear train where gear 1, on shaft a (input shaft), drives gear 2 with 32 teeth (denoted 32T) on shaft b, gear 3 (20T) also is on shaft b and drives gear 4 (507) on shaft c (output shaft). The pitch diameter of gears 1 and 2 are d = 24 mm and d = 48 mm. The center distance between gears 3 and 4 (distance between shafts b and c is 70mm....
Desgin 0.2) Figure Q.2 shows a drive system in which a 20-hp electric motor drives separate output shafts. Gear A is mounted on the motor shafit that has a rotational spoed or 1750 rpm clockwise. Gear A drives gear train consisting of…B,C,and D thr deliver power through the shafts on which they are mounted. All gears have a diametral pitch of Pa-8.The following data are given Power delivered by gears B, C, and D: Pa Numbers of teeth for all...
Desgin 0.2) Figure Q.2 shows a drive system in which a 20-hp electric motor drives separate output shafts. Gear A is mounted on the motor shafit that has a rotational spoed or 1750 rpm clockwise. Gear A drives gear train consisting of…B,C,and D thr deliver power through the shafts on which they are mounted. All gears have a diametral pitch of Pa-8.The following data are given Power delivered by gears B, C, and D: Pa Numbers of teeth for all...
Figure Q1 shows a gear train consists of four spur gears A, B, C and D to be designed for a specific mechanism. The power transmitted by gear A is 5 kW at rotational speed of 720 rpm counterclockwise direction. Number of teeth (N) for gears A,B,C and D are respectively 20, 50, 30 and 60. The module and pressure angle of the gears are respectively 4 mm and 20o . Determine followings: (a) Tangential and radial forces between gears...
2. Consider the triple speed reduction gear box shown in Figure 1. All the gears are made with a diametral pitch of 16 in. The input of the gear train is gear A, and the output is gear G. The gear train transmits an input toque of 250 lb-in, at a speed of 2,500 rpm clockwise. The number of teeth on each gear is given as follows: NA 24 teeth, Na = 60 teeth, Nc 20 teeth, No 58 teeth,...
You work for a gearbox company and have been charged with helping to design a geared countershaft for a speed reducing gearbox. The gearbox consists of a compound reverted gear train as shown below and is to be designed for an exact 16:1 speed reduction ratio. The input motor provides 10-horsepower which is carried through the gear train and operates at a speed of 2,000 rpm. You are asked to consider spur gears with a 20° pressure angle and 4...
power = 3 kW if need any more information please ask !!! You are the designer and you have been asked to design a speed reducer (gearbox) that will take power from the shaft of an electric motor rotating at 1500 rpm and deliver it to a machine that is to operate at approximately at 200 rpm Assume that you have decided to use spur gears to transmit the power [A power equal to the last one digits of your...
please solve all the questions. An electric drive consumes 1 KW electric power and generates 850 W of turning shaft power. Determine a)the drive efficiency and b) the dissipated (lost) power. A. B. Determine the tangential ( , radial ()and axial( ) forces on a spur gear tooth provided that the pressure angle is 20" and the normal force is 1 N. C. A pinion of 20 teeth turns a gear of 40 teeth at 100 rpm. What is the...
Figure 1 shows the layout of countershaft used to transmit power to a blower through a pulley drive (4-5). Pulley (driving sheave) 4 has a diameter of 125-mm and pulley (driven sheave) 5 has a diameter of 75 mm. Pulley 5 is mounted vertically below pulley 4 (as shown in the figure). Belt tension on the loose side is 20% of the tension on the tight side. A power of 7.5 kW is transmitted via the gear set (2-3) from...