We need at least 10 more requests to produce the answer.
0 / 10 have requested this problem solution
The more requests, the faster the answer.
The moist air with a flow rate 100 kg/min, temperature of 40 °C and relative Humidity of 30% enters the evaporator of air conditioner having temperature of 5°C. The cooling and dehumidification process is performed on the air to bring it to a state of the
Moist air enters a duct at 10 °C, 80% relative humidity, and a volumetric flow rate of 150 m3/min. The mixture is heated as it flows through the duct and exits at 30 °C. No moisture is added or removed and the mixture stays at 1 atm. Determine the rate of heat transfer and the relative humidity at the exit.
Moist air at 30°C, 1 atm, and 42% relative humidity enters an evaporative cooling unit operating at steady state consisting of a heating section followed by a soaked pad evaporative cooler operating adiabatically. The air passing through the heating section is heated to 45°C. Next, the air passes through a soaked pad exiting with 50% relative humidity. A. Determine the specific humidity of the entering moist air (to the heating section). (5 of 45 points. Please input your final answer...
Moist air enters a cooling coil at 27°C DBT and 60 percent relative humidity at a flow rate of 1.15 kg/s and leaves at 16°C DBT and 90 percent relative humidity. Calculate the latente load on the coil, the sensible heat ratio and the bypass factor.
Moist air at 24°C, 1 atm, and 35% relative humidity enters an evaporative cooling unit operating at steady state consisting of a heating section followed by a soaked pad evaporative cooler operating adiabatically. The air passing through the heating section is heated to 45°C. Next, the air passes through a soaked pad exiting with 50% relative humidity. Using data from the psychrometric chart, determine: (a) the humidity ratio of the entering moist air mixture, in kg(vapor) per kg(dry air). (b)...
Ouestion 2 (3 marks) Moist air enters the evaporator of an air conditioner at t. 26°C and -70 %. After leaving the evaporator, the relative humidity o,100% and the temperature of the air t tpl-7°C, where tdp is the dew point temperature of the air entering the evaporator. Given: - The mass flow rate of the air passing through the evaporator: 1000kg of dry air/h - The mass flow rate of the air passing through the condenser: 2500kg of dry...
Air enters a cooling section of 40-cm-diameter at 1 atm, 32°C, and 30 percent relative humidity at 18 m/s. Heat is removed from the air at a rate of 1200 kJ/min. Determine: (a) the exit temperature (b) the exit relative humidity of the air (c) the exit velocity.
Moist air at 20°C, 1 atm, and 43% relative humidity and a volumetric flow rate of 900 m/hrs. enters a control volume at steady state and flow along a surface maintained at 65° C, through which heat transfer occurs. Liquid water at 20° C is injected at a rate of 5 kg/hr and evaporates into flowing stream. For the control volume, Wev =0, and kinetic and potential energy effects are negligible. Moist air exits at 32°C, 1 atm. (a) draw...
Moist air at 20°C, 1 atm, and 43% relative humidity and a volumetric flow rate of 900 m²/hrs. enters a control volume at steady state and flow along a surface maintained at 65°C, through which heat transfer occurs. Liquid water at 20°C is injected at a rate of 5 kg/hr and evaporates into flowing stream. For the control volume, Wev=0, and kinetic and potential energy effects are negligible. Moist air exits at 32°C, 1 atm. (a) draw the system schematic...
Moist air at 20° c, 1 atm, and 43% relative humidity and a volumetric flow rate of 900 m/hrs. enters a control volume at steady state and flow along a surface maintained at 65 C, through which heat transfer occurs. Liquid water at 20" C is injected at a rate of 5 kg/hr and evaporates into flowing stream. For the control volume, Wa=0, and kinetic and potential energy effects are negligible. Moist air exits at 32c, 1 atm, (a) draw...
11-35.A moist air mixture with a dry bulb temperature of 48°C, a relative humidity of 40 percent, and a total pressure of 160 kPa is contained in a rigid vessel having a volume of 1.65 m3. The air is cooled until the dry bulb temperature reaches 23°C. Determine the amount of heat transferred, the final pressure of the air, and the amount of water vapor condensed during the process.