Design a magnitude comparator that is able to detect whether ? > ?, ? = ?,...
Design a magnitude comparator that is able to detect whether ? > ?, ? = ?, ? < ?, where ? and ? are two 4-bit binary numbers. Use equations to design the circuit instead of truth table (truth table becomes length approach).
Hint: You may first design a 1-bit comparator, and extend it to design 2-bit comparator. Now use the same method of extension to design 4-bit comparator from 2-bit comparator.
Homework Answers
Answer:-
we have three sections in the above figure which is seperated by black coloured line.
-> the first section represents the 1-bit comparator
-> the second section represents the 2-bit comparator
-> the third section represents the 4-bit comparator.
by combining all this section and by using 1-bit comparator and 2-bit comparators we had created 4-bit comparator.
please do thumb up
Thank you.
Add Answer to:
Design a magnitude comparator that is able to detect whether ?
> ?, ? = ?,...
#5 Design a magnitude comparator that compares two 2-bit numbers, A and B. The system has...
#5 Design a magnitude comparator that compares two 2-bit numbers, A and B. The system has three outputs that indicate whether A>B, A=B, or A <B. Draw your design with only XNOR, AND, and OR gates. 15
MY question
A magnitude Comparator is a combinational circuit that compares two binary numbers in order to find out whether one binary number is equal, less than or greater than the other binary number. Design a 2-bit binary magnitude comparator, using k-maps , simplify it and draw circuit.
A Y = A+ B 1 1 1 1 1 1 Apply the idea of the truth table above and design a 3-bit comparator using XOR or XNOR gates of...
A Y = A+ B 1 1 1 1 1 1 Apply the idea of the truth table above and design a 3-bit comparator using XOR or XNOR gates of your choice. The design should be able to determine the equality between two 3-bit words. An LED should be turned ON only when every bit in "Word A" matches every corresponding bit in "Word B". Otherwise, the LED has to be OFF Hint for I/O port Definitions: Port Name MSB...
Need help with this digital logic problem please show work for all parts thanks [2] [20...
Need help with this digital logic problem please show work for
all parts thanks
[2] [20 points] A 2-bit Binary Comparator logic circuit receives 2-bit numbers, P = P.P, and Q = Q.Qo, and has three outputs Y2, Y1, and Yo: Output Y2 is 1 if and only if P < Q, otherwise it is 0. Output Y1 is 1 if and only if P > Q, otherwise it is 0. Output Yo is 1 if and only if P...
3. Design a 4-bit combinational circuit that will detect if the input value is either a...
3. Design a 4-bit combinational circuit that will detect if the input value is either a multiple of 3 (0,3,6,…) or a multiple of 4 (0,4,8,…). Draw the truth table, derive the simplified SOP Boolean expression and draw the simplified circuit.
A Y = A ® B 1 1 1 1 1 Apply the idea of the truth table above and design a 3-bit comparator using XOR or XNOR gates of...
A Y = A ® B 1 1 1 1 1 Apply the idea of the truth table above and design a 3-bit comparator using XOR or XNOR gates of your choice. The design should be able to determine the equality between two 3-bit words. An LED should be turned ON only when every bit in "Word A" matches every corresponding bit in "Word B". Otherwise, the LED has to be OFF Hint for I/O port Definitions: Port Name Direction...
Using logisim to create a 4bit controlled comparator ECFICATIONS NPUTS Create a cireuit in Logisi...
Using logisim to create a 4bit controlled comparator ECFICATIONS NPUTS Create a cireuit in Logisim thait will take the following inputs 4 bit binary number :4 bit binary number Control where C-O, A and B will be treated as unsigned binary C-1,A and B will be treated as 2's complement signed binary (for example, the number 301 represents the value 5' it is treated as unsigned binary but it represents the value - if it is treated as 2's complemene...
A Y = A ® B 0 1 1 1 0 1 1 1 Apply the idea of the truth table above and design a 3-bit comparator using XOR or XNOR gat...
A Y = A ® B 0 1 1 1 0 1 1 1 Apply the idea of the truth table above and design a 3-bit comparator using XOR or XNOR gates of your choice. The design should be able to determine the equality between two 3-bit words. An LED should be turned ON only when every bit in "Word A" matches every corresponding bit in "Word B".Otherwise, the LED has to be OFF Hint for I/O port Definitions: MSB...
Problem 4 Design the static complementary CMOS implementation of a 2-bit comparator circuit, wher...
Problem 4 Design the static complementary CMOS implementation of a 2-bit comparator circuit, where we have two inputs A and B (each is 2-bit wide) and the output 0 if A > B and output 1 if A B. Design the circuit for minimum delay (assuming a stage effort of 4) and driving a load of 10 fF. As part of the design you need to determine the width of all transistors You can use the following transistor parameters for...
design and build a 4 bit binary multiplier that multiplies two 4 bit unsigned positive numbers...
design and build a 4 bit binary multiplier that multiplies two 4 bit unsigned positive numbers to generate a 8 bit unsigned positive number. using full adders. do not use 4 bit multiplier chip. use truth table, karnaugh map and simplified output expression of the circuit.
#5 Design a magnitude comparator that compares two 2-bit numbers, A and B. The system has three outputs that indicate whether A>B, A=B, or A <B. Draw your design with only XNOR, AND, and OR gates. 15
A Y = A+ B 1 1 1 1 1 1 Apply the idea of the truth table above and design a 3-bit comparator using XOR or XNOR gates of your choice. The design should be able to determine the equality between two 3-bit words. An LED should be turned ON only when every bit in "Word A" matches every corresponding bit in "Word B". Otherwise, the LED has to be OFF Hint for I/O port Definitions: Port Name MSB...
Need help with this digital logic problem please show work for
all parts thanks
[2] [20 points] A 2-bit Binary Comparator logic circuit receives 2-bit numbers, P = P.P, and Q = Q.Qo, and has three outputs Y2, Y1, and Yo: Output Y2 is 1 if and only if P < Q, otherwise it is 0. Output Y1 is 1 if and only if P > Q, otherwise it is 0. Output Yo is 1 if and only if P...
A Y = A ® B 1 1 1 1 1 Apply the idea of the truth table above and design a 3-bit comparator using XOR or XNOR gates of your choice. The design should be able to determine the equality between two 3-bit words. An LED should be turned ON only when every bit in "Word A" matches every corresponding bit in "Word B". Otherwise, the LED has to be OFF Hint for I/O port Definitions: Port Name Direction...
Using logisim to create a 4bit controlled comparator ECFICATIONS NPUTS Create a cireuit in Logisim thait will take the following inputs 4 bit binary number :4 bit binary number Control where C-O, A and B will be treated as unsigned binary C-1,A and B will be treated as 2's complement signed binary (for example, the number 301 represents the value 5' it is treated as unsigned binary but it represents the value - if it is treated as 2's complemene...
A Y = A ® B 0 1 1 1 0 1 1 1 Apply the idea of the truth table above and design a 3-bit comparator using XOR or XNOR gates of your choice. The design should be able to determine the equality between two 3-bit words. An LED should be turned ON only when every bit in "Word A" matches every corresponding bit in "Word B".Otherwise, the LED has to be OFF Hint for I/O port Definitions: MSB...
Problem 4 Design the static complementary CMOS implementation of a 2-bit comparator circuit, where we have two inputs A and B (each is 2-bit wide) and the output 0 if A > B and output 1 if A B. Design the circuit for minimum delay (assuming a stage effort of 4) and driving a load of 10 fF. As part of the design you need to determine the width of all transistors You can use the following transistor parameters for...
Most questions answered within 3 hours.
-
The Problem: The Case of the Harmonizing Vacations
Your CEO is exploring partnering with a European...
asked 41 minutes ago -
A chemical equation is balanced by adding coefficients in front
of some formulas so that the...
asked 40 minutes ago -
From the literature (reference your sources): What are the
lattice parameters of calcite and aragonite? Why...
asked 1 hour ago -
Your system is rejecting the question am asking which is
preceded by a case study. It...
asked 1 hour ago -
3. On January 2, 2000, Larry creates a trust with himself as
trustee. Larry as trustee...
asked 1 hour ago -
A member of the volleyball team spikes the ball. During this
process, she changes the velocity...
asked 1 hour ago -
Are adult gamers less likely to use a gaming console (Xbox,
PlayStation, Wii, etc...) than teen...
asked 2 hours ago -
The University of
Texas recently reported that 43% of college students aged 18-24
would spend their...
asked 2 hours ago -
The length of stay at a specific emergency department in
Phoenix, Arizona, in 2009 had a...
asked 1 hour ago -
. Please give the mechanism for this type of problem. Step by
Step
The toxin that...
asked 1 hour ago -
If you have a 1M stock solution and you want to dilute 1 :10
with water,...
asked 1 hour ago -
In a load instruction, the effective address is obtained by
A) Retriving the address from a...
asked 1 hour ago