Homework Answers
Solution:
If you found this solution useful then please upvote
Thank you
Add Answer to:
MESB443, Semester 1 2018/19 QUESTION 3 [10 marks) A 200V DC shunt motor develops a rated...
Problem 3: DC machine A shunt DC motor rated at V,'. 300 V, with field resistance...
Problem 3: DC machine A shunt DC motor rated at V,'. 300 V, with field resistance of Rf 600 0, armature 0.2 , resistance of R, 30.5 A (total current) when rated-load at n, consumes 916.8 rpm. Armature rotational loss (consisting of fan, friction and core loss (consisting of field resistance, armature a) Find Prot (rotational load), Pshaft and efficiency at rated load. - Assume that the rotational loss is constant and P,aft is now 50% in the case of...
The power input to a dc shunt motor during rated-load conditions is 100 W. The rotor...
The power input to a dc shunt motor during rated-load conditions
is 100 W. The rotor speed is 2000 r/min, and the armature voltage
is 100 V. The armature resistance is 2? and Rf = 200 ?. Calculate
the no-load rotor speed.
2. The power input to a dc shunt motor during rated-load conditions is 100W. The rotor speed is 2000r/min, and the armature voltage is 100V. The armature resis- tance is 2 Ω and Rf-200Ω. Calculate the no-load rotor...
QUESTION 1 A) (10 marks) A 10 kW, 250 V DC self-excited shunt generator, with an...
QUESTION 1 A) (10 marks) A 10 kW, 250 V DC self-excited shunt generator, with an armature resistance of 0.1 ohm, is delivering 80 % of rated power to the mains at rated voltage when being run at 1000 r.p.m. (revolutions per minute). The field circuit resistance is 220 ohms. The brush contact drop is 0.5 V and rotational (mechanical) losses are 750 W Calculate The induced voltage The electromagnetic torque developed The shaft torque The overall efficiency B) (15...
220 v dc shunt motor has Ra= 0.25 ohms and Rf=120 ohms . At no-load the...
220 v dc shunt motor has Ra= 0.25 ohms and Rf=120 ohms . At no-load the motor draws a current It=6A. And runs at 1500 rpm. At full-load the motor draws 62 A. the armature reaction at full load reduces the flux by 10%. Determine the rotational losses , motor speed at full-load, the shaft torque and efficiency.
3. A 20kW, 250V, 1000rpm shunt excited dc motor has armature and field resistances of 0.2...
3. A 20kW, 250V, 1000rpm shunt excited dc motor has armature and field resistances of 0.2 ohm and 2002. When the motor takes 80A rated current at rated conditions. Draw the equivalent circuit and calculate induced torque at 1200rpm. Explain the starting current limiting methods for DC motors. (30 pts) 4. Explain the conditions for parallel operation of synchronous generators. A three phase, wye connected, synchronous generator is rated 150 MW, 0.85 lagging power factor, 12.6 kV, 60 Hz, and...
Please, consider this as a single question, and answer it if possible. Any help will be...
Please, consider this as a single question, and
answer it if possible. Any help will be rated for
sure.
The DC machine, which has the armature resistance Ra=0.12, shunt field winding resistance Rfw=8022 and control rheostat (Rfc), is connected to a 100V DC power supply and operated at a DC shunt motor. At no-load condition, the motor runs at 1000rpm and armature takes 6A. The magnetization curve of the machine at 1000rpm is shown in the Fig. 1. 120 ,...
A 220 V DC shunt motor has an armature resistance, Re-0.1 S2, a field resistance, Ry=100...
A 220 V DC shunt motor has an armature resistance, Re-0.1 S2, a field resistance, Ry=100 12, and negligible rotational losses. Under certain load conditions, the shunt motor runs at 1600 rpm while drawing a total current, I = 100 A. Determine: a. the output power of the motor; b. the output torque in N-m; and, c. the efficiency Without making any changes to the applied voltage or the field, the motor operates with a new M mechanical load that...
5.2. (15 pt.) A shunt DC motor has the following characteristics Prated 30 hp, Vt =...
5.2. (15 pt.) A shunt DC motor has the following characteristics Prated 30 hp, Vt = 240 V; nated 1200 rpm Ra-0.19 Ω; Rs 0.02 2; Rotational losses at full load 3550 W rated= 110 A NF 2700 tums per pole NSE 12 turns per pole Radj 100 to 400 Ω 320 Speed = 1200 r/min 240 き 200 180 3 160 140 120 100 0 0. 0.2 0.3 04 0.5 0.6 0.7 0.8 0.9 1.0 1. 2 13 1.4...
A 8250 w shunt DC motor has a terminal voltage of 300 V. A field resistance...
A 8250 w shunt DC motor has a terminal voltage of 300 V. A field resistance Rf of 40 Ω, and an armature resistance Ra of 250 mm2. The field winding has 1500 turns. An adjustable resistance Rad is connected in series to the field winding. Rad is set at 20 Ω, but it can vary from 0 to 80 Ω. The magnetization curve is shown in Figure.1 and it is taken at a speed of 1200 rpm. (Armature reaction...
Question (3) Speed Control [10 Marks A 50 hp, 220 V, 1500 rpm DC shunt motor...
Question (3) Speed Control [10 Marks A 50 hp, 220 V, 1500 rpm DC shunt motor with an armature resistance of 0.04 Q and a field resistance of 50 Q. The motor has compensating windings, so armature reactance can be ignored. Mechanical and core losses may be ignored also. The moter is driving a load toque that is proportional with speed, Ti a (n). The motor is driving a load with a line current of 80 A and an initial...
Problem 3: DC machine A shunt DC motor rated at V,'. 300 V, with field resistance of Rf 600 0, armature 0.2 , resistance of R, 30.5 A (total current) when rated-load at n, consumes 916.8 rpm. Armature rotational loss (consisting of fan, friction and core loss (consisting of field resistance, armature a) Find Prot (rotational load), Pshaft and efficiency at rated load. - Assume that the rotational loss is constant and P,aft is now 50% in the case of...
The power input to a dc shunt motor during rated-load conditions
is 100 W. The rotor speed is 2000 r/min, and the armature voltage
is 100 V. The armature resistance is 2? and Rf = 200 ?. Calculate
the no-load rotor speed.
2. The power input to a dc shunt motor during rated-load conditions is 100W. The rotor speed is 2000r/min, and the armature voltage is 100V. The armature resis- tance is 2 Ω and Rf-200Ω. Calculate the no-load rotor...
QUESTION 1 A) (10 marks) A 10 kW, 250 V DC self-excited shunt generator, with an armature resistance of 0.1 ohm, is delivering 80 % of rated power to the mains at rated voltage when being run at 1000 r.p.m. (revolutions per minute). The field circuit resistance is 220 ohms. The brush contact drop is 0.5 V and rotational (mechanical) losses are 750 W Calculate The induced voltage The electromagnetic torque developed The shaft torque The overall efficiency B) (15...
3. A 20kW, 250V, 1000rpm shunt excited dc motor has armature and field resistances of 0.2 ohm and 2002. When the motor takes 80A rated current at rated conditions. Draw the equivalent circuit and calculate induced torque at 1200rpm. Explain the starting current limiting methods for DC motors. (30 pts) 4. Explain the conditions for parallel operation of synchronous generators. A three phase, wye connected, synchronous generator is rated 150 MW, 0.85 lagging power factor, 12.6 kV, 60 Hz, and...
Please, consider this as a single question, and
answer it if possible. Any help will be rated for
sure.
The DC machine, which has the armature resistance Ra=0.12, shunt field winding resistance Rfw=8022 and control rheostat (Rfc), is connected to a 100V DC power supply and operated at a DC shunt motor. At no-load condition, the motor runs at 1000rpm and armature takes 6A. The magnetization curve of the machine at 1000rpm is shown in the Fig. 1. 120 ,...
A 220 V DC shunt motor has an armature resistance, Re-0.1 S2, a field resistance, Ry=100 12, and negligible rotational losses. Under certain load conditions, the shunt motor runs at 1600 rpm while drawing a total current, I = 100 A. Determine: a. the output power of the motor; b. the output torque in N-m; and, c. the efficiency Without making any changes to the applied voltage or the field, the motor operates with a new M mechanical load that...
5.2. (15 pt.) A shunt DC motor has the following characteristics Prated 30 hp, Vt = 240 V; nated 1200 rpm Ra-0.19 Ω; Rs 0.02 2; Rotational losses at full load 3550 W rated= 110 A NF 2700 tums per pole NSE 12 turns per pole Radj 100 to 400 Ω 320 Speed = 1200 r/min 240 き 200 180 3 160 140 120 100 0 0. 0.2 0.3 04 0.5 0.6 0.7 0.8 0.9 1.0 1. 2 13 1.4...
A 8250 w shunt DC motor has a terminal voltage of 300 V. A field resistance Rf of 40 Ω, and an armature resistance Ra of 250 mm2. The field winding has 1500 turns. An adjustable resistance Rad is connected in series to the field winding. Rad is set at 20 Ω, but it can vary from 0 to 80 Ω. The magnetization curve is shown in Figure.1 and it is taken at a speed of 1200 rpm. (Armature reaction...
Question (3) Speed Control [10 Marks A 50 hp, 220 V, 1500 rpm DC shunt motor with an armature resistance of 0.04 Q and a field resistance of 50 Q. The motor has compensating windings, so armature reactance can be ignored. Mechanical and core losses may be ignored also. The moter is driving a load toque that is proportional with speed, Ti a (n). The motor is driving a load with a line current of 80 A and an initial...
Most questions answered within 3 hours.
-
In the following reaction, which element is undergoing
oxidation: Na2SO3 + N2O --> N2 + Na2SO4...
asked 45 minutes ago -
Which of the following pairs of ions have the same electron
configuration?
I: Br− and Se2−...
asked 3 hours ago -
The Foremost Composite Materials Company is planning a two-day
sales conference for October 19-20. The conference...
asked 3 hours ago -
3) Illustrate the observed pattern of relatedness of organisms
versus adaptations to specific conditions. This means...
asked 4 hours ago -
In winter a lake has a 0.35 m thick ice layer over 1.10 m of
water....
asked 4 hours ago -
Assuming the following has been encrypted with a Vigenere cipher
below, use the method(s) and assumptions...
asked 5 hours ago -
How would I use switch statements to write a program that will
take an input of...
asked 5 hours ago -
Imagine a reaction in which methane gas combusts at a constant
pressure of 1 atm and...
asked 5 hours ago -
Two parallel wires (each 12 m in length) are separated by a
distance of 0.065 m...
asked 5 hours ago -
Suppose there were three masses at the corner of uniform
equilateral triangle. The masses are m1...
asked 5 hours ago -
Situation: A building that is 618 m above the ground floor. How
many times would a...
asked 5 hours ago -
help me and discuss one successful and one
unsuccessful international company/busines in Indonesia.whyit
succeed and why...
asked 5 hours ago