5 Three inductive coils each of inductance 45mH are connected in star to a 3 phase...
b) The load connected to a three-phase supply comprises three similar coils connected in star. If the phase currents are 10A and the total active power and power factor absorb by the loads are 3kW and 0.8 lagging, respectively. Find: i. The magnitude of phase and line voltages (4 marks) ii. Total apparent power (1 mark) iii. The impedance of each coil. (2 marks) c) If the coil in Q3(b) are now connected in delta to the same three-phase supply,...
Q2.(A).Three identical coils, each of resistance 202 and inductance 55mH are connected in star to a 420V. 56 Hz, 3-phase supply. Determine the total power dissipated in each case. What is the major beneficial for choosing the three phase system over single phase system? [5 Marks]
A three-phase generator connected in a star generates a phase voltage of Vθ = 24 KVrms and supplies a three-phase transformer connected in star. The transformation ratio is 115: 1. Each of the three coils of the secondary transformer feed 3 equal charges each composed of them by R = 18Ω, XC = 2Ω and XL = 20Ω. a) Calculate the phase, line and charge currents after the b) Calculate the phase, line and load voltages c) Calculate the Apparent...
I just need answers to f,g,and h connected motor is connected to Vi-L 120 3T/6 V-rms, 50 Hz three e resistance and inductance of each phase is 8-Ω and 0.04 H, respectively. The PS. A three-phase phase source. The wire between a source and the motor has 0.1-Ω of resistance and 1 mH inductance. nd the phase voltage. (2 pts.) a single-phase diagram of the system with its values. (5 pts.) c) Find the line current (magnitude and phase) for...
ELE2601/101/3/2019 QUESTION 4 A 400 V three-phase, 50 Hz system, ABC sequence supplies the following loads: A star-connected load with the following phase impedances: A delta-connected load of equal phase impedances: Use VAB as reference and determine the following quantities: 4.1 The magnitude and angle of the currents drawn by the star-connected load (IAN; lBN; ICN). 4.1.1 The magnitude and angle of the phase (IAB; lBc; ICa) and line (lA; ls; Ic) currents drawn by the delta-connected load. 4.1.2 (12)...
QUESTION 6 (MULTI-PHASE SYSTEMS) A 400 v, 50 Hz, three-phase distribution system supplies a 20 kVA, three-phase induction motor load at a power factor of 0 8 lagging, and a star-connected set of impedances, each having a resistance of 10 Ω and an inductive reactance of 8 Ω Calculate the capacitance of delta-connected capacitors required to improve the overalil power factor to 0 95 lagging [14] TOTAL 1001 QUESTION 6 (MULTI-PHASE SYSTEMS) A 400 v, 50 Hz, three-phase distribution system...
A three-phase generator connected in a star generates a phase voltage of Vθ = 2500 Vrms and supplies a delta-connected three-phase load. The three phases of the generator feed 3 equal charges each composed of R = 10 Ω, XC = 4Ω and XL = 10Ω. a) Calculate the phase, line and load currents b) Calculate the phase, line and load voltages c) Calculate the powers of Apparent (S), Real (P) and Reactive (Q) delivered by the generator d) Calculate...
A three-phase 400V, star-connected motor has an output of 50kW, with an efficiency of 90 per cent and a power factor of 0.85. Calculate the line current. Sketch a phasor diagram showing the voltages and the currents. If the motor windings were connected in mesh (delta), What would be the correct voltage of a three-phase supply suitable for the motor?
Three similar inductors, each of resistance 10 ohm and inductance 0.019H, are delta-connected to a three-phase, 400V, 50Hz sinusoidal supply. Calculate: (i) the value of the line current, (ii) the power fator, (iii) the active power input to the curcuit.
Two balanced loads are connected to three phase supply via a feeder lines as shown below. The STAR load has a line voltage of 440 V, at 50 Hz. (Take 440/30% V as reference) F2 F2 F1 0.025 J0.142 B 0.0110 JO.05Ω Three Phase 65 kW Vi2 Load 2 Load 1 L1 DELTA PF = 0.72 440 30°V STAR Line Voltage LineVoltage | |Д|lagging Line Voltage STAR CONECTED Zo 2.80 + 13.270/Phase Determine: (i) The Line Current ; (ii) The...