At an industrial manufacturing plant, 5.00L of air in the chamber is at 1.00atm. In order...
At an industrial manufacturing plant, 5.00L of air in the chamber is at 1.00atm. In order to pressurize the system, a piston compresses the air to 15.00atm. What is the volume of the chamber (L) after the piston is compressed? (assume that the chamber is temperature-controlled)
Homework Answers
Thank
you vmuch....Add Answer to:
At an industrial manufacturing plant, 5.00L of air in the
chamber is at 1.00atm. In order...
A two-chambered tank is connected to a high pressure pipeline containing air. The bottom chamber of...
A two-chambered tank is connected to a high pressure pipeline containing air. The bottom chamber of the tank contains air that is initially at 450 kPa and 300 K due to the force of an adiabatic, weighted piston (piston face area is 1.5 square meters). The piston separates the top and bottom chambers. The top chamber and bottom chamber each have an initial volume of 2.0 cubic meters. Other conditions and properties are shown in the attached figure. The valve...
A mouse is placed in a sealed chamber with air at 754.0 torr. This chamber is...
A mouse is placed in a sealed chamber with air at 754.0 torr. This chamber is equipped with enough solid KOH to absorb any CO2 and H2O produced by the mouse. The gas volume in this chamber is measured to be exactly 1.80 L, and the temperature is held constant at 294K. After two hours the pressure inside the chamber falls to 710.1 torr. What mass of oxygen has the mouse consumed?
A 3.00-L tank contains air at 3.00atm and 20.0 C. The tank issealed and cooled...
A 3.00-L tank contains air at 3.00atm and 20.0 C. The tank is sealed and cooled until the pressure is 1.00atm.(A)What is the temperature then in degrees Celsius? Assume that the volume of the tank is constant.(B)If the temperature is kept at the value found in part A and the gas is compressed, what is the volume when the pressure again becomes 3.00atm?
A Piston system is compressed to a volume of 0.0125 m3 and the air temperature of...
A Piston system is compressed to a volume of 0.0125 m3 and the air temperature of 375 K. The piston compress to a volume of 0.005 m3. What will be the final temperature?
In a diesel engine, the piston compresses air at 306 K to a volume that is...
In a diesel engine, the piston compresses air at 306 K to a volume that is 0.0621 of the original volume and a pressure that is 48.7 times the original pressure. What is the temperature of the air after the compression?
A sample of a gas in a cylindrical chamber with a movable piston occupied a volume...
A sample of a gas in a cylindrical chamber with a movable piston occupied a volume of 1.40 liters when the pressure was 768 torr and the temperature was 26.9 C. The volume of the system was readjusted to 2.16 liters by changing the temperature while the load on the piston was kept constant to keep the pressure in the system constant. What was the new? Assume ideality A gas sample containing 0.2820 moles of a compound is trapped in...
In this lab, you will be breathing into a 5 L mixing chamber. The mixing chamber will start with ...
In this lab, you will be breathing into a 5 L mixing chamber. The mixing chamber will start with “regular” air (20.93 vol% O2, 0.04 vol% CO2, and 79.03 vol% N2). You will inhale air through your nose (which is exposed to “regular” air) and exhale through your mouth into the mixing chamber. As your exhaled air is added into the chamber, an equal volume of air leaves the other end of the chamber so that the system remains at...
1. Air in a cylinder with a volume of 500 cm3 is compressed by a piston...
1. Air in a cylinder with a volume of 500 cm3 is compressed by a piston to a volume of 150 cm3. If the initial air pressure is 5 x 104 Pa (N/m2), what is the pressure in the cylinder after compression? (Assume that this is a slow process, and that T remains constant.) 8. The sample of gas in Question 2 is contained in a rigid closed container. If the pressure of the gas is 1013 mb at 20°C, what...
Air in a cylinder with a volume of 500 cm3 is compressed by a piston to...
Air in a cylinder with a volume of 500 cm3 is compressed by a piston to a volume of 150 cm3. If the initial air pressure is 5 x 104 Pa (N/m2), what is the pressure in the cylinder after compression? (Assume that this is a slow process , and that T remains constant.) Pa?
You and your younger brother are designing an air rifle that will shoot a lead pellet...
You and your younger brother are designing an air rifle that will shoot a lead pellet with mass m 1.00 g and cross-sectional area A = 0.0250 cm2. The rifle works by allowing high-pressure air to expand, propelling the pellet down the rifle barrel. Because this process happens very quickly, no appreciable thermal conduction occurs and the expansion is essentially adiabatic. Your design is such that, once the pressure begins pushing on the pellet, it moves a distance of L...
A two-chambered tank is connected to a high pressure pipeline containing air. The bottom chamber of the tank contains air that is initially at 450 kPa and 300 K due to the force of an adiabatic, weighted piston (piston face area is 1.5 square meters). The piston separates the top and bottom chambers. The top chamber and bottom chamber each have an initial volume of 2.0 cubic meters. Other conditions and properties are shown in the attached figure. The valve...
A sample of a gas in a cylindrical chamber with a movable piston occupied a volume of 1.40 liters when the pressure was 768 torr and the temperature was 26.9 C. The volume of the system was readjusted to 2.16 liters by changing the temperature while the load on the piston was kept constant to keep the pressure in the system constant. What was the new? Assume ideality A gas sample containing 0.2820 moles of a compound is trapped in...
You and your younger brother are designing an air rifle that will shoot a lead pellet with mass m 1.00 g and cross-sectional area A = 0.0250 cm2. The rifle works by allowing high-pressure air to expand, propelling the pellet down the rifle barrel. Because this process happens very quickly, no appreciable thermal conduction occurs and the expansion is essentially adiabatic. Your design is such that, once the pressure begins pushing on the pellet, it moves a distance of L...
Most questions answered within 3 hours.
-
During Heaton Company’s first two years of operations, it
reported absorption costing net operating income as...
asked 9 minutes ago -
Consider testing the
hypotheses:
H0: p = 0.56
H1: p > 0.56
where p is
the...
asked 12 minutes ago -
In a two-factor analysis of variance a main effect is defined as
____.
a. the unique...
asked 19 minutes ago -
A bank's loan officer rates applicants for credit. The ratings
are normally distributed with a mean...
asked 20 minutes ago -
Fill in the following information for Adipic Acid: molecular
weight, g or ml, mole, melting point,...
asked 25 minutes ago -
how
to use a for loop to iterate over the string below and print each
character...
asked 27 minutes ago -
Please type answer, Thanks.
Respond to the following in a minimum of 175
words:
Research industry...
asked 27 minutes ago -
Assume that all interest rates in the economy increase from 9
percent to 10 percent. Which...
asked 37 minutes ago -
Describe the function of a Change Control Board.
When calculating Planned Value (PV), what is the...
asked 42 minutes ago -
The customer help center in your company receives calls from
customers who need help with some...
asked 53 minutes ago -
A manufacturer wished to compare the wearing qualities of two
different types of automobile tires, A...
asked 52 minutes ago -
Write a MATLAB script file that will sum all the positive
entries in V and stop...
asked 1 hour ago