Homework Answers
summary
:
1 MPa = 1 N/mm2 = 106 N/m2 = 106 Pa
Add Answer to:
A propeller steel shaft subjected to an axial load of 39,402 N, in addition to combined...
A rotating shaft is made of AISI 1035 CD steel is subjected to an axial load of 710N
A rotating shaft is made of AISI 1035 CD steel is subjected to an axial load of 710N, a fluctuating torque load from 60 to 120 N.m, and a completely reversed bending moment of 160N.m. The shaft has a diameter of 30mm, and operates at T=250°C, and has a life reliability of 95%. Note that the fatigue stress-concentration factor for bending Kfb is 1.49 and that for torque Kft is 2.65..1. Draw the Yield (Langer) line 2. Modified Goodman line. 3. Calculate...
QUESTION 2 A circular shaft with a diameter of 20 mm, welded to a flat square...
QUESTION 2 A circular shaft with a diameter of 20 mm, welded to a flat square plate with a circular fillet welded joint with a weld size of 13 mm. The shaft subjected to a Bending Moment with Maximum bending stress equal to 36 N/mm2 Compute the amount of Bending Moment that can act on the shaft (N.mm)?
QUESTION 9 A line shaft rotating at speed to transmit power through torque equal to 911...
QUESTION 9 A line shaft rotating at speed to transmit power through torque equal to 911 N.m. The shaft is made of mild steel with an allowable shear stress of 68 MPa. Neglecting the effect of bending moment on the shaft. Compute the diameter of the shaft (mm)? QUESTION 11 A gear carried by a shaft exerts a force on the shaft. The torque transmitted by the gear is equal to 377,890 N.mm. The Pitch diameter of the gear is...
A rotating shaft is made of 42 mm by 4 mm thick cold-drawn round steel tubing and has a 6 mm diam...
A rotating shaft is made of 42 mm by 4 mm thick cold-drawn round steel tubing and has a 6 mm diameter hole drilled transversely through it. The shaft is subjected to a pulsating torque fluc- tuating from 20 to 160 Nm and a completely reversed bending moment of 200 Nm. The steel tubing has a minimum strength of Sut 410 MPa (60 ksi). The static stress-concentration factor for the hole is 2.4 for bending and 1.9 for torsion. The...
a solid circular shaft of radius a is subjected to the combined axial load P, bending moment M, and torsional moment T shown. Assume that M = Pa/2 and T = Pa/2. The axial load is constant while the m...
a solid circular shaft of radius a is subjected to the
combined axial load P, bending moment M, and torsional moment T
shown. Assume that M = Pa/2 and T = Pa/2. The axial load is
constant while the moments M and T are completely reversed cyclic
(recall, completely reversed cyclic means having the same amplitude
in positive and negative sense in a cycle). The material of the
shaft has the yield stress of 300 MPa and endurance limit of...
3. The propeller shaft of the tugboat is subjected to the compressive force and torque shown....
3. The propeller shaft of the tugboat is subjected to the compressive force and torque shown. The shaft has an inner diameter of 125 mm and an outer diameter of 175 mm. (20 pts) 0410 KN 2 kNm Determine the following at point A located on the outer surface: avg. TMIP, 8s Principal stresses and Op c Draw Mohr's circle d Draw principal stress and maximum in plane shear stress elements
A shaft with a diameter of 43 mm, is shown below On the right hand side...
A shaft with a diameter of 43 mm, is shown below On the right
hand side at location D a wheel has a force F of 4824N applied. The
diameter of this wheel is 150 mm. The torque produced by F is
transmitted through the entire shaft to location A where the torque
is reacted. There are no other constraints at location A. Bearings,
are located at B and C, and provide radial constraint. The bearing
at B also provides...
A low carbon steel shaft is designed to have a diameter of 30 mm. It is...
A low carbon steel shaft is designed to have a diameter of 30 mm. It is to be subjected to an axial load (P-30 kN), a moment (M-200 N-m), and a torque (T-300 N-m). Assume the yield stress for the steel is (280 MPa), the Poisson's ratio is (v= 0.29), and the safety factor is (1-1). Calculate the margin of safety using the following failure theories. a.) Rankine Criteria (Maximum Principal Stress) b.) Tresca Criteria (Maximum Shear Stress) c.) Saint...
Review ▼ Part A The propeller shaft of the tugboat is subjected to the compressive force...
Review ▼ Part A The propeller shaft of the tugboat is subjected to the compressive force and torque shown If the shaft has an inner diameter of 100 mm and an outer diameter of 150 mm, determine the principal stress at a point A located on the outer surface (Figure 1) Enter your answers numerically separated by a comma. Figure 1 of 1 MPa Submit ns 0 kN Part B kN m Determine the orientation of the principal plane Express...
A 30.0-mm diameter shaft is subjected to cyclic combined bending and tor- sion loading such that ...
A 30.0-mm diameter shaft is subjected to cyclic combined bending and tor- sion loading such that M = 0.2P and T =0.15 P, where the magnitude of P varies from Pmi,--0.60 Pmax to Pmax and length is measured in millimeters. The shaft is made of a stress-relieved cold steel (o, 810 MPa 620 MPa, of safety SF 1.80, determine Pmax for 10' cycles of loading, Use the octahedral shear-stress criterion and the Gerber relation. -worked SAE 1060 = 410 MPa)....
QUESTION 2 A circular shaft with a diameter of 20 mm, welded to a flat square plate with a circular fillet welded joint with a weld size of 13 mm. The shaft subjected to a Bending Moment with Maximum bending stress equal to 36 N/mm2 Compute the amount of Bending Moment that can act on the shaft (N.mm)?
QUESTION 9 A line shaft rotating at speed to transmit power through torque equal to 911 N.m. The shaft is made of mild steel with an allowable shear stress of 68 MPa. Neglecting the effect of bending moment on the shaft. Compute the diameter of the shaft (mm)? QUESTION 11 A gear carried by a shaft exerts a force on the shaft. The torque transmitted by the gear is equal to 377,890 N.mm. The Pitch diameter of the gear is...
A rotating shaft is made of 42 mm by 4 mm thick cold-drawn round steel tubing and has a 6 mm diameter hole drilled transversely through it. The shaft is subjected to a pulsating torque fluc- tuating from 20 to 160 Nm and a completely reversed bending moment of 200 Nm. The steel tubing has a minimum strength of Sut 410 MPa (60 ksi). The static stress-concentration factor for the hole is 2.4 for bending and 1.9 for torsion. The...
a solid circular shaft of radius a is subjected to the
combined axial load P, bending moment M, and torsional moment T
shown. Assume that M = Pa/2 and T = Pa/2. The axial load is
constant while the moments M and T are completely reversed cyclic
(recall, completely reversed cyclic means having the same amplitude
in positive and negative sense in a cycle). The material of the
shaft has the yield stress of 300 MPa and endurance limit of...
3. The propeller shaft of the tugboat is subjected to the compressive force and torque shown. The shaft has an inner diameter of 125 mm and an outer diameter of 175 mm. (20 pts) 0410 KN 2 kNm Determine the following at point A located on the outer surface: avg. TMIP, 8s Principal stresses and Op c Draw Mohr's circle d Draw principal stress and maximum in plane shear stress elements
A shaft with a diameter of 43 mm, is shown below On the right
hand side at location D a wheel has a force F of 4824N applied. The
diameter of this wheel is 150 mm. The torque produced by F is
transmitted through the entire shaft to location A where the torque
is reacted. There are no other constraints at location A. Bearings,
are located at B and C, and provide radial constraint. The bearing
at B also provides...
A low carbon steel shaft is designed to have a diameter of 30 mm. It is to be subjected to an axial load (P-30 kN), a moment (M-200 N-m), and a torque (T-300 N-m). Assume the yield stress for the steel is (280 MPa), the Poisson's ratio is (v= 0.29), and the safety factor is (1-1). Calculate the margin of safety using the following failure theories. a.) Rankine Criteria (Maximum Principal Stress) b.) Tresca Criteria (Maximum Shear Stress) c.) Saint...
Review ▼ Part A The propeller shaft of the tugboat is subjected to the compressive force and torque shown If the shaft has an inner diameter of 100 mm and an outer diameter of 150 mm, determine the principal stress at a point A located on the outer surface (Figure 1) Enter your answers numerically separated by a comma. Figure 1 of 1 MPa Submit ns 0 kN Part B kN m Determine the orientation of the principal plane Express...
A 30.0-mm diameter shaft is subjected to cyclic combined bending and tor- sion loading such that M = 0.2P and T =0.15 P, where the magnitude of P varies from Pmi,--0.60 Pmax to Pmax and length is measured in millimeters. The shaft is made of a stress-relieved cold steel (o, 810 MPa 620 MPa, of safety SF 1.80, determine Pmax for 10' cycles of loading, Use the octahedral shear-stress criterion and the Gerber relation. -worked SAE 1060 = 410 MPa)....
Most questions answered within 3 hours.
-
Which attribute allows you to specify a custom "thumbnail" for
multimedia elements?
asked 33 minutes ago -
How much 0.1200 M sodium hydroxide solution is need to titrate
14 mL of a 0.100...
asked 8 minutes ago -
An impulse is a change in momentum usually over
a short time. For which of the...
asked 13 minutes ago -
1a)When a 5000-kg roller coaster train full of riders approaches
the loading dock at a speed...
asked 33 minutes ago -
The Poseidon Swim Company produces swim trunks. The average
selling price for one of their swim...
asked 28 minutes ago -
If the elasticity of supply of a good is ∞, then its
A. supply curve is...
asked 14 minutes ago -
Write an application for the Shady Rest Hotel; the program
determines the price of a room....
asked 19 minutes ago -
USE THE FOLLOWING INFORMATION TO ANSWER THE NEXT (6)
QUESTIONS:
The following is a December 31,...
asked 35 minutes ago -
Suppose you plan to invest $5,000 each year (beginning at the
end of this year) into...
asked 25 minutes ago -
What is the cell potential of the following cell at 25
oC? Note Au is a...
asked 26 minutes ago -
DNA to Protein
Describe the mutation that created the HbS allele:
type of mutation, location of...
asked 32 minutes ago -
1. Why are the advantages and disadvantages of object-oriented
databases? 2. What are data marts? How...
asked 52 minutes ago