QUESTION A thermistor is a device whose resistance varies with temperature. At 200 Cathermistor's resistance is...
Q3/17 Some copper wire has a resistance of 200 Ohm at 20.C.A current is passed through the wire and the temperature rises to 90°C. Determine the resistance of the wire at 90°C, assuming that the temperature coefficient of resistance * .is 0.004/-C at 0 C 201.666 Ohm O 352.778 Ohm O 232.232 Ohm O 220 Ohm O 251.85 Ohm O 521.65 Ohm O Q5/// The maximum power dissipated in a 4 load is 100 w when connected to a d.c....
1. What is the emf of a battery that increases the electric potential energy of 0.050 C of charge by 0.60 J as it moves from the negative to the positive terminal? 2 .A thermistor is a device whose resistance varies with temperature. At 20∘C a thermistor's resistance is 10.0 kΩ. When connected to a 1.2 V battery, the current through the thermistor increases by 20 μA as the temperature increases to 30∘C. What is the thermistor's resistance at this...
A flat coil of wire consisting of 20 turns, each with an area of 10 cm, is positioned perpendicularly to a uniform magnetic field that varies with time according to B=2.5 f. where t is measured in s and B in T. If the coil has a total resistance of 0.10 9, what is the magnitude of the induced current at 0.8s? a. 0.20 A b. 0.60 A c. 0.50 A d. 0.80 A e. None of the above At what frequency...
18] #. Match the name below with the device at the right that it represents. I. Et Il Resistance. ideal emf (8) device. Capacitance Real battery IV. [12] #2. Circle all the TRUE statements below. a) The Loop Rule is simply a statement of Conservation of Energy in an electrical circuit. b) The Junction Rule is simply a statement of Conservation of Electric Charge in an electrical circuit. e) When measuring the electric potential difference across a component in an...
5.01.2019 LON-CAPA 29.30 Messages Courses Yardým Logout AHMET MERT TURK (Oörenci) PHYS102-Fall Ana Mena Contents | Grades 2018 Course Contents..Not SavýsyEvaluateeedback Print Into An 14-turn coil has square loops measuring 0.297 m along a side and a resistance of 5.37 Ω. It is placed in a magnetic field that makes an angle of 42.7 with the plane of each loop. The magnitude of this field varies with time according to B 3.23t3, where t is measured in seconds and B...
Hey guys please answer both of these if possible this is my only
question left for the month. TIA
Problem Set 11 Begin Date: 11/12/2019 12:01:00 AM -- Due Date: 11/22/2019 5:00:00 PM End Date: 11/24/2019 11:59:00 PM (10%) Problem 5: A rectangular conducting loop has side a = 0.055 m, side b 0.15 m, and resistance R = 75 Q. It moves into a magnetic field of magnitude B = 0.015 T with speed v 7.5 m/s. Refer to...
14) Which of the following is NOT a typical electrical component? A) Resistor B) Capacitor C) Megatron Inductor E) Transformer D) 23) Convert 6.8 x 10-5 W to the closest standard metric prefix. A) 68 °W B) 0.68 uW C) 680 uW D) 6.8 uw 24) Convert 3.95 x 10-4 A to the closest standard metric prefix. A) 3.95 mA 39.5 mA 0.395 mA D 395 mA Convert the following: 25) 2 x 10-3 Amp = A) 2 microamps 2...
Need by 12 pm July 30, 2020 with answers shown and explanation.
Thank you.
R 1) Two resistors are connected to each other in parallel, one resistor has a known value of R, the resistance of the second one is unknown. If the equivalent of two resistors in parallel is equal to what is the resistance of the second one? A) R B) 2R E) 4R 2) Which one of the following sentences is correct about the velocity selector? A)...
pleas help me in this do any question you know using National
Electrical Code 2011
Applied Electricity NEC worksheet t hree Copper conductors with THHN insulation run in Electrical A branch-circuit Consther conductors. The conductor terminations are rated for a maximum ure in the area of this installation is not expected to exceed 30C size 8 AWG, the maximum ampacity of the conductors If the conductors for this circuit are permitted A 40 amperes. B. 50 amperes. to be used...