An ac series circuit has an impedance of 176 ? , and the phase angle between the current and the voltage of the generator is ? = -68
phase angle is negative so its and inductor .
Inductance = XL
and tan68 = XL / R
XL = Rtan68 = 2.475R
and as we knoe Impedance Z = sqrt( R^2 + XL^2 )
176^2 = R^2 + 2.475R^2
R = 65.93 Ohm ..............Ans (a)
XL = 2.475 x 65.93 = 163.18 Ohm .........ans(b)
An ac series circuit has an impedance of 176 ? , and the phase angle between...
A series AC circuit contains a resistor, an Inductor of 220 mH, a capacitor of 4.80 f, and a generator with Av max - 240 V operating at 50.0 Hz. The maximum current in the circuit is 130 mA (a) Calculate the inductive reactance (b) Calculate the capacitive reactance (c) Calculate the impedance kn (d) Calculate the resistance in the circuit kn (e) Calculate the phase angle between the current and the generator voltage
Consider an AC series circuit. Determine the phase angle at frequencies 800 Hz, 2400 Hz, and 3500 Hz. The circuit is at resonance at 2400 Hz with impedance at resonance 125. Does the current lead, lag, or is in phase with the voltage? Show work. R= 100 ohms C= 0.3 micro farads L= 0.0146
A series RLC circuit has R=4250, L=1.25H and C=3.50uF. It is connected to an AC source with f=60.0 Hz and Vmax=150V. a. Determine the inductive reactance, the capacitive reactance and the impedance of the circuit. b. Find the Maximum current in the circuit. C. Find the phase angle between the current and voltage.
Consider the RLC series AC circuit. If the phase angle of the circuit is negative, this means that the... current leads the emf. the circuit is in resonance the circuit is more inductive than capacitive the emf leads the current the emf and current are in phase
A resistor and capacitor are connected in series across an ac generator. The voltage of the generator is given by V() = Vocos(wt), where Vo = 120V,w = 120x rad/s, R = 55082, and C = 7.54F. (a) What is the magnitude of the impedance of the RC circuit? (b) What is the amplitude of the current through the resistor? (e) What is the phase difference between the voltage and current? The magnitude of the impedance is The amplitude of...
A resistor and capacitor are connected in series across an ac generator. The voltage of the generator is given by V(0) = Vocos(wt), where VO = 120V, w = 120+ rad/s, R=55092, and C = 3pF. (a) What is the magnitude of the impedance of the RC circuit (b) What is the amplitude of the current through the resistor? (c) What is the phase difference between the voltage and current? The magnitude of the impedance is 1041.3 22. The amplitude...
Determine resonant frequency, amplitude, impedance, and phase angle. (b) Suppose the circuit parameters in a series RLC circuit are: L = 1.0 uH, C = 10.0 nF, R= 10092, and the source voltage is 220 V. Determine the resonant frequency of the circuit and the amplitude of the current at resonance. If the frequency of the input voltage source is 50 Hz, calculate the impedance and the phase angle. f = 1 / 2 x 5c = 1/2 X 511...
1.) Calculate the RMS current and phase angle of an AC circuit with voltage supply of 14.5V at 50Hz, 10 ohm resistor and a 200uF capacitor joined in series. b.) Calculate the RMS current and phase angle of an AC circuit with voltage supply of 13.5V at 50Hz, 10 ohm resistor and a 50mH inductor joined in parellel. Please show all steps thank you!
1. In an AC series circuit, the current in a pure resistor differs in phase with the applied voltage by what angle? Options: a=zero, b=45°, c=90° d=180 2. In the inductor of a 60-Hz AC series circuit, the peak voltage precedes the peak current in each cycle by what time interval? Option: a)2.1 ´ 10-3 s b)4.2 ´ 10-3 s c) 8.3 ´ 10-3 s d) 1.7 ´ 10-3 s 3) What is the impedance of an AC series circuit...
a series resonant circuit has an AC source voltage of 10 V at a phase angle of 0 degrees. The following are values for R, XL, XC respectively are: 2 Ohms, 10 Ohms, and 10 Ohms. Find I, VR, VL, VC, Q, BW, power dissipated at the half-power points. (Fr=5kHz)