QUESTION 3 In the circuit shown below, the elements are R = 20 Ω , L-80...
A coil (L = 94.1 mH), a resistor (R = 31 Ω), a capacitor (C = 98.6 μF) and an A.C. source (52.9 V, 84.4 Hz) are connected in series. Find the rms power, in W, dissipated by the circuit. NOTE: If the voltage of an A.C. power source is given without specification, it is rms. For example: a "10 V A.C. power source" an output voltage of 10 V rms.
Function Generatr Inductor Model Ra R, Figure 1 Series RLC Circuit Preliminary This laboratory will demonstrate how varying resistance changes the natural response of a series RLC circuit (Fig. 1). The function generator is modeled as an ideal voltage source v(t) 5 u() V in series with source resistance Rs-50Q. After measurements using an LCR meter, the inductor is modeled as an ideal L 90 mH inductor in series with resistance RL-20Q. The capacitance is C-0.22 μF. 1) Calculate the...
The circuit shown in Figure 3 below shows a R-L-C series circuit with components R= 50 , L = 1 H, and C= 250 uF. This circuit is connected in series to an AC current source ( il ) where instantaneous current is given by it = 28.29 Sin (100t) A. B + VR- C + VC - D ).4C Current source Figure 3 (a) Draw the circuit diagram for this circuit and mark the impedances (3 marks) (b) What...
In a series R-L-C circuit, L = 0.190 H , C = 84.5 μF and the voltage amplitude of the source is 290 V . Part A What is the resonance angular frequency of the circuit? ω0 = rad/s SubmitMy AnswersGive Up Part B When the source operates at the resonance angular frequency, the current amplitude in the circuit is 0.610 A . What is the resistance R of the resistor? R = Ω SubmitMy AnswersGive Up Part C At...
An RLC series circuit is constructed with R-130.0 Ω, circuit. C-7.25 μF, and L-0.54 H. The circuit is connected to an AC generator with a frequency of 60.0 Hz that delivers a maximum current of 2.20 A to the (a) What is the impedance of this circuit? (b) What are the maximum potential differences across each of the three circuit elements (R, L, and C)? VR, max И, max Vc, max (c) What is the phase angle between the source...
An RLC circuit contains in series a resistor R = 3 Ω, an inductor L = 1 H, and a capacitor C = 0.5 F. The current I(t) is provided by a source with emf E = 20cos(2t) Volts, where t is the time. Find the steady-state current Ip that develops after a long time (theoretically when t → ∞).
(45 pts.) For the circuit shown, R = 50.0 Ω, L 95.0 mH, and C-70.0 pC The power source has 5, 65.0 V rms and a frequency of 40.0 Hz. a. What is the value of XL? b. What is the value of Xc? c. What is the value of Z? d. What is the rms current? e. What is the rms voltage across the resistor? f. What is the rms voltage across the inductor? g. What is the rms...
An L-R-C series circuit L = 0.124 H , R = 245 Ω , and C = 7.28 μF carries an rms current of 0.451 A with a frequency of 394 Hz A)What is the phase angle?' F)What is the average rate at which electrical energy is dissipated (converted to other forms) in the capacitor? B)What is the power factor for this circuit? G)in the inductor? C)What is the impedance of the circuit? D)What is the rms voltage of...
An RLC series circuit has a resistance of R = 330.0 Ω, an inductance L = 0.2000 mH, and a capacitance C = 32.00 nF. (a) What is the resonant frequency? (b) If the capacitor breaks down for peak voltages in excess of 7.000 × 102 V, what is the maximum source voltage amplitude when the circuit is operated at the resonant frequency?
An RLC series circuit has a resistance of R = 330.0 Ω, an inductance L = 0.2000 mH, and a capacitance C = 33.00 nF. (a) What is the resonant frequency? (b) If the capacitor breaks down for peak voltages in excess of 7.000 × 102 V, what is the maximum source voltage amplitude when the circuit is operated at the resonant frequency?