please help PROBLEM (b) The beam below is made of an Aluminum alloy (E 72 GPa)...
The cantilevered beam shown below is a sandwich beam with a plastic core and aluminum alloy faces. The member is subjected to a concentrated load at the free end. The plastic core (240mm x 200 m m in cross section) has an elastic modulus of 100 GPa and allowable normal stress of 220 MPa, while the 6 mm thick aluminum face plates have an elastic modulus of 75 GPa and allowable normal stress of 260 MPa. Question I: 118 marks]...
Problem 3: For the beam shown find the slope and deflection at point B and C 100 KN 300 kN-m 6 m E = constant = 70 GPa 1 = 500 (106) mm Problem 4: For the beam shown find the deflection at point B and the slope at point A 80 KN 12 m 12 m E = constant = 200 GPa I = 600 (106) mm
For the beam in Figure 1, which is made of steel (E = 200 GPa) with a solid rectangular cross section 80 mm wide and 100 mm deep: • derive an algebraic expression for the deflection as a function of x = the distance from the left end, • hence also calculate o the slope at the left support, and o the deflection 2 m from the left support. 20 kn.m ८ & 12 kN/m र ८ 5m Figure 1...
The simply supported beam consists of a w530 x 66 structural steel wide-flange shape [E-200 GPa; I -351 x 106 mm]. Determine (a) the beam deflection at point C. (b) the beam deflection at point E. Assume P = 35 kN, w = 80 kN/m, LAB = LBC = LCD = 4 m, LDE = 2 m LAB BC Answers: (a) vc=T-190.693 (b) VE178.156 The simply supported beam consists of a w530 x 66 structural steel wide-flange shape [E-200 GPa;...
Link BD is made of brass (E 105 GPa) and has a cross-sectional area of 240 mm2. Link CE is made of aluminium (E 72 GPa) and has a cross-sectional area of 300 mm2. Knowing that they support rigid member ABC, determine the maximum force P that can be applied vertically at point A if the deflection of A is not to exceed 0.36 mm. (Round the final answer to two decimal places.) 995 mm A 150 mm E 225...
Could you please provide a worked solution for the following question. The answer is 23.57MPa. Can you please provide a clear easy to follow solution that gets the above answer. Thank you long The hollow thin-walled hollow section of aluminium alloy illustrated below is 1200 mm It has one free end and the other is built into a solid wall. At the free end, the following loads are applied in the directions illustrated and distributed evenly over the perimeter of...
The simply supported beam consists of a W410 × 60 structural steel wide-flange shape [E = 200 GPa; I = 216 × 106 mm4]. For the loading shown, determine the beam deflection at point C. Assume P = 72 kN, w = 60 kN/m, LAB = LBC = 1.4 m, LDE = LCD=1.4 m, MA = 167 kN-m. P10.048 Not Correct 216 x 106 mm41. For the loading shown, determine the beam deflection at point C The simply supported beam...
The rod ABCD is made of an aluminum alloy with a modulus of elasticity E = 70 GPa. For the loading shown, and neglecting the weight of the rod, determine the stress in sections AB, BC, and CD and the deflection of point D. For stress, answer to nearest whole number. Use 3 decimal places for displacement. Drawing is not to scale. Assume compressive stresses are positive, and that displacement to the right is positive. Stress in AB = _______ MPa Stress...
X Not Correct The cantilever beam consists of a rectangular structural steel tube shape [E = 180 GPa; I = 151 x 106 mm4]. For the loading shown, determine: (a) the beam deflection VA at point A. (b) the beam deflection VB at point B. Assume P = 88 kN, Q = 29 kN, MB = 217 kN-m, w = 60 kN/m, LAB = 1.8 m, LBC = 2.6 m. P w с MB B LAB LBC Answers: X (a)...
5) A bar made of steel (E = 200 GPa, Poisson ratio = 0.32) has the dimensions shown in Fig. 5. If an axial force of P= 80 kN is applied to the bar, determine the change in its length and the change in the dimensions of its cross-section. The material behaves elastically Selastically NOKN 100 mm Fig. 5