intro to thermal Extra point ILLUSTRATIVE PROBLEM 3.18 Steam is expanded in a nozzle from an...
Problem 8.015 Water is the working fluid in a Rankine cycle. Steam exits the steam generator at 1500 lbf/in.2 and 1100℉ Due to heat transfer and frictional effects in the line connecting the steam generator and turbine, the pressure and temperature at the turbine inlet are reduced to 1400 Ibf/in.2 and 1000 , respectively. Both the turbine and pump have isentropic efficiencies of 95%. Pressure at the condenser inlet is 2 lbf/ in.2, but due to frictional effects the condensate...
Problem 1: This is textbook problem 4.51 (page 224) Steam at 1800 lbf/in2 and 1100 °F enters a turbine operating at steady state. As shown in the Figure, 20% of the entering mass flow is extracted at 600 lbf/in2 and 500 °F. The rest of the steam exits as a saturated vapor at 1 lbf/in2 . The turbine develops a power output of 6.8×106 Btu/h. Heat transfer from the turbine to the surroundings occurs at a rate of 5×104 Btu/h....
Homework 2 Problem 1: A piston-cylinder device initially contains 0.35-kg steam at 3.5 MPa, superheated by 7.4 C. Now the stream loses heat to the surroundings and the piston moves down, hitting a set of stops at which point the cylinder contains saturated liquid water. The cooling continues until the cylinder contains water at 200C. Determine (a) the final pressure and the quality (if mixture), (b) the boundary work, (c) the amount of heat transfer when the piston first hits...