1) Why are fibers birefringent -because the fiber is a natural fiber -because the fiber has...
1)
Why are fibers birefringent
-because the fiber is a natural fiber
-because the fiber has long range orientation (order)
-because the fiber has a refractive index greater than 1.52
-because the refractive index is less than 1.52
2)
|
Which of the following tests can individualize fiber evidence? |
|
|
- burn testing -solvent testing -refractive index -tensile testing |
Homework Answers
1. The fibers are birefringent because the fiber has long range orientation (order).
2. Tensile test individualizes the fibre evidance. The equipment used for this test is called as fibre proof tester and which measures the tensile strength of fibre.
Add Answer to:
1)
Why are fibers birefringent
-because the fiber is a natural fiber
-because the fiber has...
(2 points) Optical fibers are made of glass, where light is trapped inside the fiber by...
(2 points) Optical fibers are made of glass, where light is trapped inside the fiber by total internal reflection. This example is not a fiber geometry and doesn't include the gradations in refractive index that are used, but still illustrates the point of total internal reflection. Suppose you have a piece of glass, with light incident from the glass side toward an air interface. The refractive index of the glass is 1.45. What is the critical angle where all light...
Question 1 Select the correct statement(s) regarding fiber optic cable. a. The core and cladding within...
Question 1 Select the correct statement(s) regarding fiber optic cable. a. The core and cladding within a fiber optic cable must have the same refractive index in order to achieve TIR (Total Internal Reflection) b. Only single mode fiber (SMF) can be constructed with either a “step” or “graded index” core c. Mulimode optical fibers (MMF) are vulnerable to modal dispersion d. All statements are correct Question 2 Using a direct sequence spread spectrum (DSSS) technique spreads a narrow band channel...
Polymer composite materials have gained popularity because they have high strength to weight ratios and are...
Polymer composite materials have gained popularity because they have high strength to weight ratios and are relatively easy and inexpensive to manufacture. However, their nondegradable nature has prompted development of environmentally friendly composites using natural materials. An article reported that for a sample of 10 specimens with 2% fiber content, the sample mean tensile strength (MPa) was 51.1 and the sample standard deviation was 1.2. Suppose the true average strength for 0% fibers (pure cellulose) is known to be 48...
Polymer composite materials have gained popularity because they have high strength to weight ratios and are...
Polymer composite materials have gained popularity because they have high strength to weight ratios and are relatively easy and inexpensive to manufacture. However, their nondegradable nature has prompted development of environmentally friendly composites using natural materials. An article reported that for a sample of 10 specimens with 2% fiber content, the sample mean tensile strength (MPa) was 51.7 and the sample standard deviation was 1.4. Suppose the true average strength for 0% fibers (pure cellulose) is known to be 48...
Polymer composite materials have gained popularity because they have high strength to weight ratios and are...
Polymer composite materials have gained popularity because they have high strength to weight ratios and are relatively easy and inexpensive to manufacture. However, their nondegradable nature has prompted development of environmentally friendly composites using natural materials. An article reported that for a sample of 10 specimens with 2% fiber content, the sample mean tensile strength (MPa) was 51.3 and the sample standard deviation was 1.1. Suppose the true average strength for 0% fibers (pure cellulose) is known to be 48...
1. When Abrams and Townsend investigated the natural selection of copepods that avoid predation of bioluminescent...
1. When Abrams and Townsend investigated the natural selection of copepods that avoid predation of bioluminescent dinoflagellates, which of the following best states the hypothesis they were testing? A. The bioluminescent dinoflagellates produce enough light that they can also photosynthesize at night, harming the copepods. B. The light emitted by bioluminescent dinoflagellates is of sufficient wavelength and energy to be dangerous to feeding copepods. C. Bioluminescent flagellates benefit from selection of flashing, because it startles the copepods. D. Copepods that...
My doughter has a fever and an earache. The case of Anne M. the first day...
My doughter has a fever and an earache. The case of Anne M. the first day when, in retrospect, the meningitis an incubation Gatent) period. This led to the me a culture ear (abnormal unction). This fluid beca As pus accumulated, pressure caused to perform a spinal tap, a highly sensitive and specific predictive medium for growth of resident bacteria from the test, which showed pus, a result with a high value. The perforation of the eardrum. The hole became...
Problem 1: Fibre optics (2 points) Figure 1: Sketches of the geometry of an optical fibre...
Problem 1: Fibre optics (2 points) Figure 1: Sketches of the geometry of an optical fibre A long cylinder of dielectric material can guide light via total internal reflection. This idea dates back to the 1870s and forms the basis of the modern fibre optics communication technology. As long as the diameter of these fibres is large compared to the wavelength of the infalling light, its wave nature is negligible and we can use Geometric Optics to study the propagation...
R Engineenng eratures in the rim by around 313 K compared with earlier piston designs. The piston...
We were unable to transcribe this imager Engineenng eratures in the rim by around 313 K compared with earlier piston designs. The piston's steel skirt is much more rigid than the aluminum skirt in smaller deformation and allowing for designs with tighter clearances tin harmful exhaust emissions) from the piston. This design has been shown to reduce piston termn results in a more stable piston with less oil consumption (thus further r which are machined prior to welding. The process...
Two professors at a local college developed a new teaching curriculum designed to increase students' grades...
Two professors at a local college developed a new teaching curriculum designed to increase students' grades in math classes. In a typical developmental math course, 48% of the students complete the course with a letter grade of A, B, or C. In the experimental course, of the 17 students enrolled, 11 completed the course with a letter grade of A, B, or C. Is the experimental course effective at the a=0.1 level of significance? Complete parts (a) through (g). Because...
(2 points) Optical fibers are made of glass, where light is trapped inside the fiber by total internal reflection. This example is not a fiber geometry and doesn't include the gradations in refractive index that are used, but still illustrates the point of total internal reflection. Suppose you have a piece of glass, with light incident from the glass side toward an air interface. The refractive index of the glass is 1.45. What is the critical angle where all light...
Polymer composite materials have gained popularity because they have high strength to weight ratios and are relatively easy and inexpensive to manufacture. However, their nondegradable nature has prompted development of environmentally friendly composites using natural materials. An article reported that for a sample of 10 specimens with 2% fiber content, the sample mean tensile strength (MPa) was 51.1 and the sample standard deviation was 1.2. Suppose the true average strength for 0% fibers (pure cellulose) is known to be 48...
Polymer composite materials have gained popularity because they have high strength to weight ratios and are relatively easy and inexpensive to manufacture. However, their nondegradable nature has prompted development of environmentally friendly composites using natural materials. An article reported that for a sample of 10 specimens with 2% fiber content, the sample mean tensile strength (MPa) was 51.7 and the sample standard deviation was 1.4. Suppose the true average strength for 0% fibers (pure cellulose) is known to be 48...
Polymer composite materials have gained popularity because they have high strength to weight ratios and are relatively easy and inexpensive to manufacture. However, their nondegradable nature has prompted development of environmentally friendly composites using natural materials. An article reported that for a sample of 10 specimens with 2% fiber content, the sample mean tensile strength (MPa) was 51.3 and the sample standard deviation was 1.1. Suppose the true average strength for 0% fibers (pure cellulose) is known to be 48...
My doughter has a fever and an earache. The case of Anne M. the first day when, in retrospect, the meningitis an incubation Gatent) period. This led to the me a culture ear (abnormal unction). This fluid beca As pus accumulated, pressure caused to perform a spinal tap, a highly sensitive and specific predictive medium for growth of resident bacteria from the test, which showed pus, a result with a high value. The perforation of the eardrum. The hole became...
Problem 1: Fibre optics (2 points) Figure 1: Sketches of the geometry of an optical fibre A long cylinder of dielectric material can guide light via total internal reflection. This idea dates back to the 1870s and forms the basis of the modern fibre optics communication technology. As long as the diameter of these fibres is large compared to the wavelength of the infalling light, its wave nature is negligible and we can use Geometric Optics to study the propagation...
We were unable to transcribe this imager Engineenng eratures in the rim by around 313 K compared with earlier piston designs. The piston's steel skirt is much more rigid than the aluminum skirt in smaller deformation and allowing for designs with tighter clearances tin harmful exhaust emissions) from the piston. This design has been shown to reduce piston termn results in a more stable piston with less oil consumption (thus further r which are machined prior to welding. The process...
Two professors at a local college developed a new teaching curriculum designed to increase students' grades in math classes. In a typical developmental math course, 48% of the students complete the course with a letter grade of A, B, or C. In the experimental course, of the 17 students enrolled, 11 completed the course with a letter grade of A, B, or C. Is the experimental course effective at the a=0.1 level of significance? Complete parts (a) through (g). Because...
Most questions answered within 3 hours.
-
1. The correlation coefficient determined for two variables has
a value of 0.89. Describe, in words,...
asked 3 minutes ago -
The following data relate to direct materials costs for
November:
Actual costs
4,700 pounds at $5.35...
asked 1 minute ago -
Kyle, a 95.0 kg football player, leaps straight up into the air
(with no horizontal velocity)...
asked 25 minutes ago -
Which of the following is a measure of profitability?
A.
Quick (acid-test) ratio
B.
Net sales...
asked 28 minutes ago -
Find the total pressure exerted by 2 grams of ethane and 3 grams
of CO2 contained...
asked 29 minutes ago -
A fireman standing on a 5.2 m high ladder operates a water hose
with a round...
asked 25 minutes ago -
A cream formulation is studied for accelerated stability study.
Creaming was observed when formulation was tested...
asked 28 minutes ago -
A 1,150 lumen light bulb is placed 37 cm in front of a mirrored
wall, whose...
asked 39 minutes ago -
Given that z is a standard normal random variable, compute the
following probabilities (to 4 decimals)....
asked 45 minutes ago -
You begin preparation of the calibration curve to measure
absorbance vs concentration of FeSCN2+. To do...
asked 1 hour ago -
When you speak after breathing helium, in which the speed of
sound is much greater than...
asked 55 minutes ago -
3. Stock Valuation: You are the CEO of Under Armour, Inc. and
are thinking about how...
asked 59 minutes ago