Is this true or false? In a steam generator water is taken from a lake or...
Is this true or false?
In a steam generator water is taken from a lake or river directly and is converted to steam to spin a turbine
Homework Answers
Yes this is True
In steam generators the water is taken from various sources and then it is heated using different energies and the steam is created
This steam then turns the turbines of the generator to produce the electricity
The mechanical energy provided by steam to the turbine is converted into the electrical energy.
So
This statement is true
I hope this helps. If you have any query or want more detailed explanation, feel free to ask in the comments section below.
Add Answer to:
Is this true or false?
In a steam generator water is taken from a lake or...
In a steam power plant, water is pressurized in an adiabatic pump from 100kPa as a saturated liqu...
In a steam power plant, water is pressurized in an adiabatic pump from 100kPa as a saturated liquid to 5 MPa at 150C. The pump is directly driven by an adiabatic steam turbine, which also powers a generator. Steam enters the steam turbine at 5 MPa and 450C and leaves as saturated vapor at 100kPa. Determine the net-work output of the pump-turbine-generator combination if the generator operates at 85% efficiency. (in kJ/kg) ) b) Determine the entropy generation for both...
Water is the working fluid in a Rankine cycle. Steam exits the steam generator at 1500 lbf/in.2 and 1100°F. Due to heat transfer and frictional effects in the line connecting the steam generator and...
Water is the working fluid in a Rankine cycle. Steam exits the steam generator at 1500 lbf/in.2 and 1100°F. Due to heat transfer and frictional effects in the line connecting the steam generator and turbine, the pressure and temperature at the turbine inlet are reduced to 1400 lbf/in.2 and 1000°F, respectively. Both the turbine and pump have isentropic efficiencies of 95%. Pressure at the condenser inlet is 2 lbf/ in. 2, but due to frictional effects the condensate exits the...
Problem 8.015 Water is the working fluid in a Rankine cycle. Steam exits the steam generator at 1500 lbf/in.2 and 1100℉ Due to heat transfer and frictional effects in the line connecting the steam ge...
Problem 8.015 Water is the working fluid in a Rankine cycle. Steam exits the steam generator at 1500 lbf/in.2 and 1100℉ Due to heat transfer and frictional effects in the line connecting the steam generator and turbine, the pressure and temperature at the turbine inlet are reduced to 1400 Ibf/in.2 and 1000 , respectively. Both the turbine and pump have isentropic efficiencies of 95%. Pressure at the condenser inlet is 2 lbf/ in.2, but due to frictional effects the condensate...
A 45%-efficient hydro turbine/generator is located 100ft below a water source. If water is taken from...
A 45%-efficient hydro turbine/generator is located 100ft below a water source. If water is taken from the source at 200gal/min through a 3-in PVC pipe and there is 800 ft of pipe, 4. Find the power delivered by the generator. What diameter pipe would be needed to keep the flow speed around 5 ft/sec or less? a. b.
In Geothermal-steam power cycle, the source of heat is the hot water from well. The heat...
In Geothermal-steam power cycle, the source of heat is the hot
water from well. The heat exchanger receive hot water at Tg1= 105
oC and the water leaves at 40 oC as shown in Figure 3. Steam exits
the boiler at 40 bar, 300 oC, and it exits the turbine at 1 bar.
Saturated liquid water exits the condenser at 1 bar. The plant
operate to generate 20 MW electric power with generator efficiency
of 0.95. The isentropic efficiency of...
The water in a large lake is to be used to generate electricity by the installation...
The water in a large lake is to be used to generate electricity by the installation of a hydraulic turbine generator at a location where the depth of the water is 50 m. Water is to be supplied at a rate of 5000 kg/s. If the electric power generated is measured to be 1862 kW and the generator efficiency is 95 percent, determine (a) the overall efficiency of the turbine-generator, (b) the mechanical efficiency of the turbine, and (c) the...
Cabin by the Lake Session #3 For 100 watts, how much steam or water would you need for one hour's operation if you could have 100% efficiency? a-P (Last names a-c) Steam condition: Water...
Cabin by the Lake Session #3 For 100 watts, how much steam or water would you need for one hour's operation if you could have 100% efficiency? a-P (Last names a-c) Steam condition: Water height: (Last names f-9 9-즈 Deliverable Monday 5/6: How much? (with supporting calculations) draulic turbine /r-100%, size/weight of water tank. İhare 4CDW aW
Cabin by the Lake Session #3 For 100 watts, how much steam or water would you need for one hour's operation if you...
PLEASE SHOW ALL TABLES USED!!!!! AND HAVE NEAT HANDWRITING!! A steam generator discharges water vapor at...
PLEASE SHOW ALL TABLES USED!!!!! AND HAVE NEAT HANDWRITING!! A steam generator discharges water vapor at 10 MPa and 640 degrees Celsius. The first turbine stage expands the vapor to 2 MPa, which is extracted to a feedwater heater. The remaining portion expands through the second turbine stage to a condenser pressure of 10 kPa. The heat transfer into the steam generator is 5 MW, and the first pump operates at 60% isentropic efficiency. The enthalpies exiting the feedwater heater...
Consider the Rankine cycle below with steam flow rate of 5kg/s. The steam receives heat from...
Consider the Rankine cycle below with steam flow rate of 5kg/s. The steam receives heat from the combustion gases in the furnace of the generator; assume the combustion gases change temperature from 2000°K to 425 K in flowing through the steam generator. The cooling water enters the condenser 20°C and leaves at 40°C. Assume the flow in the pump and the turbine is adiabatic and internally reversible. Also assume the combustion gas has the properties of air. If To is...
Water from a large tank is used to generate electricity by installing a hydraulic turbine- generator...
Water from a large tank is used to generate electricity by installing a hydraulic turbine- generator at 100 m down from the water surface as shown in Figure QS. The water is supplied to the turbine at a rate of 2000 kg's. If the mechanical power input of the turbine is 1800 kW and the generator efficiency is 80%, determine the percentage reduction of efficiency between generator alone and combination of turbine-generator Consider the water density as 1000 kg/m (7...
In a steam power plant, water is pressurized in an adiabatic pump from 100kPa as a saturated liquid to 5 MPa at 150C. The pump is directly driven by an adiabatic steam turbine, which also powers a generator. Steam enters the steam turbine at 5 MPa and 450C and leaves as saturated vapor at 100kPa. Determine the net-work output of the pump-turbine-generator combination if the generator operates at 85% efficiency. (in kJ/kg) ) b) Determine the entropy generation for both...
Water is the working fluid in a Rankine cycle. Steam exits the steam generator at 1500 lbf/in.2 and 1100°F. Due to heat transfer and frictional effects in the line connecting the steam generator and turbine, the pressure and temperature at the turbine inlet are reduced to 1400 lbf/in.2 and 1000°F, respectively. Both the turbine and pump have isentropic efficiencies of 95%. Pressure at the condenser inlet is 2 lbf/ in. 2, but due to frictional effects the condensate exits the...
Problem 8.015 Water is the working fluid in a Rankine cycle. Steam exits the steam generator at 1500 lbf/in.2 and 1100℉ Due to heat transfer and frictional effects in the line connecting the steam generator and turbine, the pressure and temperature at the turbine inlet are reduced to 1400 Ibf/in.2 and 1000 , respectively. Both the turbine and pump have isentropic efficiencies of 95%. Pressure at the condenser inlet is 2 lbf/ in.2, but due to frictional effects the condensate...
A 45%-efficient hydro turbine/generator is located 100ft below a water source. If water is taken from the source at 200gal/min through a 3-in PVC pipe and there is 800 ft of pipe, 4. Find the power delivered by the generator. What diameter pipe would be needed to keep the flow speed around 5 ft/sec or less? a. b.
In Geothermal-steam power cycle, the source of heat is the hot
water from well. The heat exchanger receive hot water at Tg1= 105
oC and the water leaves at 40 oC as shown in Figure 3. Steam exits
the boiler at 40 bar, 300 oC, and it exits the turbine at 1 bar.
Saturated liquid water exits the condenser at 1 bar. The plant
operate to generate 20 MW electric power with generator efficiency
of 0.95. The isentropic efficiency of...
The water in a large lake is to be used to generate electricity by the installation of a hydraulic turbine generator at a location where the depth of the water is 50 m. Water is to be supplied at a rate of 5000 kg/s. If the electric power generated is measured to be 1862 kW and the generator efficiency is 95 percent, determine (a) the overall efficiency of the turbine-generator, (b) the mechanical efficiency of the turbine, and (c) the...
Cabin by the Lake Session #3 For 100 watts, how much steam or water would you need for one hour's operation if you could have 100% efficiency? a-P (Last names a-c) Steam condition: Water height: (Last names f-9 9-즈 Deliverable Monday 5/6: How much? (with supporting calculations) draulic turbine /r-100%, size/weight of water tank. İhare 4CDW aW
Cabin by the Lake Session #3 For 100 watts, how much steam or water would you need for one hour's operation if you...
Consider the Rankine cycle below with steam flow rate of 5kg/s. The steam receives heat from the combustion gases in the furnace of the generator; assume the combustion gases change temperature from 2000°K to 425 K in flowing through the steam generator. The cooling water enters the condenser 20°C and leaves at 40°C. Assume the flow in the pump and the turbine is adiabatic and internally reversible. Also assume the combustion gas has the properties of air. If To is...
Water from a large tank is used to generate electricity by installing a hydraulic turbine- generator at 100 m down from the water surface as shown in Figure QS. The water is supplied to the turbine at a rate of 2000 kg's. If the mechanical power input of the turbine is 1800 kW and the generator efficiency is 80%, determine the percentage reduction of efficiency between generator alone and combination of turbine-generator Consider the water density as 1000 kg/m (7...
Most questions answered within 3 hours.
-
You mix 5 moles of H2 at 300 K with 5 moles of He at 360...
asked 27 seconds from now -
In Python,
Write a complete program to input up to a maximum of 25
characters into...
asked 4 minutes ago -
A ship sailing in the sea enters a wide and deep
River. The density of seawater...
asked 7 minutes ago -
Solve it in Python
4. An alternade is a word in which its letters, taken
alternatively...
asked 26 minutes ago -
Assume that the company sells two products, X and Y, with
contribution margins per unit of...
asked 25 minutes ago -
The International Nanny Association (INA) reports that in a
sample of 928 in- home child care...
asked 57 minutes ago -
Consider the following data:
x
−6−6
−5−5
−4−4
−3−3
−2−2
P(X=x)P(X=x)
0.20.2
0.20.2
0.20.2
0.20.2
0.20.2...
asked 39 minutes ago -
A uniform disk with mass 35.2 kg and radius 0.230 mis pivoted at
its center about...
asked 26 minutes ago -
Gustin Corp manufactures, sells, and leases medical equipment.
Gustin Corp agrees to lease 3 CAT scanners,...
asked 30 minutes ago -
Describe the origin of the cardiac contraction signal and the
pathway it follows through the heart.
asked 40 minutes ago -
Find the area under the standard normal curve to the left of
z
= -1.22 ....
asked 50 minutes ago -
an afro-carribean family is seeking psychotherapeutic help
because they are concerned about their son, Trevor, is...
asked 51 minutes ago