Thin walled pressure vessels

Question

Question

Thin walled pressure vessels

A spherical pressure vessel is constructed by bolting two hemispheres together along rigid flanges as shown in the sketch. The sphere has an internal diameter of 1.5 m and the plate thickness is 5 mm. Allowable tensile stresses are 45 MPa in the shell and 80 MPa in the bolts.

1. Calculate the allowable gauge pressure.

2. Determine the number of bolts required if the bolt diameter is 25 mm

(Note: bolt root diameter = 0.84 × nominal bolt diameter)

A thin copper tube, 14 mm internal diameter and 0,5 mm wall thickness has closed ends and rotates at 1200 r/min while it is subjected to an internal gauge pressure of 222 Pa. Calculate the total hoop stress in the wall of the tube if the density of copper is 8900 kg/m³

college Strength-Of-Materials

Add a comment Improve this question Transcribed image text

Answer 1

Similar Homework Help Questions

Thin walled pressure vessels

A pressurised cylindrical container has a sealed cover plate fastened with steel bolts as shown below. The internal pressure p in the thin cylinder is 1900 kPa, the inside diameter D of the cylinder is 250 mm and the diameter db of the bolts is 12 mm. 1. If the allowable tensile stress in the bolts is 70 MPa, find the number of bolts needed to fasten the cover plate. ...
AY 2 019 SUNDAY MONDAY TUESDAY WED PART1 Strength of Materials for Technicians 4th Edition 50 33 A steam boiler is to have a 300 mm diameter hand hole placed on one end. If the internal pressure i...

AY 2 019 SUNDAY MONDAY TUESDAY WED PART1 Strength of Materials for Technicians 4th Edition 50 33 A steam boiler is to have a 300 mm diameter hand hole placed on one end. If the internal pressure is to be 1,3 MPa, how many 15 mm bolts will be required to keep the cover ie in position? The root diameter of a 15 mm bolt is 12 mm. The allowable tensile stress in the bh is 100 MPa and the...
thin walled pressure vessel Thin walled pressure vessel rectangular prism- Word Help Tell me what you...

thin walled pressure vessel Thin walled pressure vessel rectangular prism- Word Help Tell me what you want to do ew 1 Norma No Spac. Heading 1 Heading2e Subtitle Suble Em.. Emphasis Intense E... Strong Styles Thin walled pressure vessel rectangular prism An APU battery explodes on a plane with a maximum pressure of 10.9MPa being produced. Aluminium alloy 6061 T6 is used (yield strength 276 MPa, Ultimate tensile strength 310MPa) as its casing to contain the blast. What should be...

Prob #4 A cylindrical thank is designed to withstand an internal pressure of3 MPa. The tank...

Prob #4 A cylindrical thank is designed to withstand an internal pressure of3 MPa. The tank has an inner diameter of 4 m and the wall thickness is 40 mm. The tank is fabricated by bolting together (on both sides of the vssel) two half-cylindrical longitudinal thin shell sections as shown. The diameter of the bolts is 25mm and the bolts are made from a material with allowable stress of 250 MPa 18. The hoop stress sustained by the tank...
Thin walled pressure vessels

A safety valve (pressure relieve valve) on top of a pressure vessel containing steam under pressure p = 2 MPa, has a discharge hole of diameter d = 10 mm as shown in the figure below. The valve is designed to release the steam when the pressure reaches the maximum allowable value pmax = 2.23 MPa. If the free height (i.e., uncompressed height) of the spring hfree = 135 mm and its spring stiffness k = 5 kN/m, what should...
A cylindrical pressure vessel of 250 mm mean diameter and 6 mm wall thickness is fabricated...

A cylindrical pressure vessel of 250 mm mean diameter and 6 mm wall thickness is fabricated from a 1.2 m length of spirally welded pipe AB as shown. Tank gauge pressure is 4 MPa and centric axial forces P and P1 of 240 kN act through rigid end plates. Determine: (a) Net longitudinal and hoop stresses. (b) Normal stress acting perpendicular to weld and shear stress parallel to weld (show sketch of Mohr’s circle). (c) Determine the Factor of Safety...

please make your answers clear and organized . Problem 8.5-3 A cylindrical pressure vessel having radius...

please make your answers clear and organized . Problem 8.5-3 A cylindrical pressure vessel having radius r-300 mm and wall thickness t 15 mm is subjected to internal pressure p 2.5 MPa. In addition, a torque T120 kN-m acts at each end of the cylinder (see figure) (a) Determine the maximum tensile stress ?mix and the maximum in-plane shear stress Tmax in the wall of the cylinder torque T? 30 MPa and 76 MPa, respectively, what is the minimum required...
QUESTION 2 The end-cap of a pressure vessel as shown in Figure 2 is secured by...

QUESTION 2 The end-cap of a pressure vessel as shown in Figure 2 is secured by 10 off M10 x SAE class 10.9 bolts (with rolled threads). A soft gasket is used such that the clamped member stiffness is one quarter of the bolt stiffness. The internal diameter of the pressure vessel is 140 mm and the pressure in the vessel varies from 0 to P MPa gauge. Assuming that the bolts are initially tightened to 80% of their yield...
MEE2001/2015 Q5. A thin walled steel cylinder with 10 mm wall thickness and internal diameter of 200 mm (Fig. Q5) is subjected to an internal pressure, p. The steel used for the cylinder has a yie...

MEE2001/2015 Q5. A thin walled steel cylinder with 10 mm wall thickness and internal diameter of 200 mm (Fig. Q5) is subjected to an internal pressure, p. The steel used for the cylinder has a yield stress of 240 MPa. +F 200 mm Fig. Q5 (a) If a tensile axial force of 1MN is applied to the end plate, show that the maximum internal pressure that can be applied before the cylinder yields according to the Tresca criterion is 16.2...

please answer both the questions Question 2 A titanium tube 200mm diameter and 5mm wall thickness...

please answer both the questions Question 2 A titanium tube 200mm diameter and 5mm wall thickness is subjected to an internal pressure of 13.5MPa. The tube contains a longitudinal crack along its full length. Assuming that the tube can be approximated by a single edge notched plate subjected to a tensile stress equal to the hoop stress in the tube determine the crack length to cause failure. You may assume that the material fracture toughness is 55 MPavm. Please provide...

Thin walled pressure vessels

Homework Answers

Request Answer!

Add Answer to:
Thin walled pressure vessels

Post as a guest

Earn Coins