1. Choice question: there are four choices marked A), B), C) and D) for each question,...
In the diagram below, what is the eutectic temperature and what is the eutectoid temperature of steel? A. eutectic temperature: 1539°C, eutectoid temperature: 723°C. B. eutectic temperature: 723°C, eutectoid temperature: 1539°C. C. eutectic temperature: 723°C, eutectoid temperature: 1130°C. D. eutectic temperature: 1130°C, eutectoid temperature: 723°C. In the diagram below, what is the eutectic composition and what is the eutectoid composition of steel? A. eutectic composition: 4.3 wt% C, eutectoid composition: 0.83 wt% C. B. eutectic composition: 0.83 wt% C, eutectoid...
7. A hypereutectoid steel contains 0.8% C. When slow cooled from austenite the following transformation products result. a) ferrite and bainite b) ferrite and martensite c) ferrite and pearlite d) pearlite and cementite 8. Pearlite is a combination of a) cementite and iron carbide b) ferrite and cementite c) ferrite and bainite d) ferrite and martensite 9. The process of hardening steel consists of what two steps? a) melting the steel followed by quenching b) melting the steel followed by...
please answer question 2,3,4 A critical feature of steel is that a considerable amount of carbon can be dissolved in the austenite, phase, (up to 2.14 w/o at 1147"C), whereas carbon is essentially insoluble in ferrite, Cooling from point d to e, just above the eutectoid but still in the an increased fraction of the +y region, will produce phase and a microstructure similar to that shown: the particles precinitates out in the form af an intermetallic.compound called iron-carbide...
Phase, TTT, and CCT diagrams provided 6.8. The heat treatments noted below are carried out in 1080 steel. In each case what phases will be present at the end of the treatment? a. Austenitize at 750 deg C; quench to 0 deg C in 1s. b. Austenitize at 750 deg C; rapid quench to 650 deg C; isothermally anneal for 1000 s; quench to 0 deg C in 1s c. Austenitize at 750 deg C; very rapid quench to 250...
(1s) The TTT d austenitized. Determine the final amount (approximate percentages) of each microstructure, and show basic path (draw on charts). 6. agram for an iron-carbon alloy w, h 0.76%C steel is given. Assume that the specimen gans above 800°C for each case and that it has been held at this temperature long enough to be fully microstructure (such as bauxite, magnetite, bainite, pearlite, um, martensite, spheroidite, cementite). Must specify microstructure name (not a letter). 800 a) Sample 1- Decrease...
(1) (b) concrete, (c) polyethylene, or (d) water? 1.14 Copper is generally considered easy to weld because of its high thermal conductivity: (a) true or (b) false? (1) 1,15 Which of the following properties or characteristics do not apply to metals (two correct answers): (a) good thermal conductivity, (b) high strength, (c) high electrical resistivity, (d) high stiffness, and (e) ionic bonding? 1.16 An alloy is a metal composed of two or more elements, at least one of which is...
A multiple choice test consists of 10 questions each with four choices (a,b,c,d) for each question. If a student must get at least 7 correct to pass the test, what is the probability that a student could pass the exam simply by guessing? Find your answer to 4 decimal places.
Question # 9 (9 pt) In the lab you performed to determine the % of salt in a mixture of salt and sand. a. Which part of the procedure was performed with the aim of separating the salt from b. Which part of the procedure was performed with the aim of collecting all of the salt c. Which part of the procedure was performed with the aim of finally getting a measure nothing but the salt? of salt and Choose...
1. An) is used to represent a compound. a) symbol b) equation c) subscript d) formula 2. atoms or groups of atoms are called ions. a) charged b) diatomic c) neutral d) monatomic 3. For the formula of a compound to be correct, the algebraic addition of the charges on atoms or ions in the compound must add up to _ a) zero b) one c) two d) four 4. Potassium bromide is an example of an) compound a) molecular...
Which of the following are mixtures? water (HO) salt water salt (NaCl) air (mostly N, and O2) O Classify each substance as an element, a compound, a homogeneous mixture, or a heterogeneous mixture. Element Compound Homogeneous mixture Heterogeneous mixture Answer Bank Classify the phrases pertaining to pure substances and mixtures as either true or false. True False Answer Bank Components of a homogeneous mixture are visibly distinct The components of homogeneous and heterogeneous mixtures cannot be separated Homogeneous mixtures have...