Help ASAP #3. A 3-phase, 220 V, 4-pole, 60 Hz induction motor has the following parameters...
A 3-phase, 208 V, 60 Hz, 30 hp, four-pole induction motor has the following equivalent circuit parameters. R1 = 0.2 Ω, , , Xm = 12Ω.The rotational loss is 500 W. For a slip of 5%, calculate (a) The motor speed in rpm and radians per sec (b) The current drawn by the motor from the power supply (c) The stator cu-loss (d) The air gap power (e) The rotor cu-loss (f) The shaft power (g)The developed torque and the shaft torque (h) The efficiency of the motor Use...
A three-phase, six-pole 440 V, 60 Hz induction motor has the following per-phase equivalent circuit parameters referred to the stator: R1 = negligible, R’2 =0.3 Ω, Rφ = infinite, X1 = 1.131 Ω, X’2 = 1.131 Ω and Xφ = 37.7 Ω. Rotational losses are negligible. Assume the stator is connected to a 440 V, 60 Hz source and use the 6-parameters IEEE model. a) Determine the motor starting torque. (5 points) b) Calculate the motor breakdown torque. (5 points)...
1. A 15 hp, 4 pole, 208 V, 60 Hz, Y-connected, three-phase squirrel cage induction motor has the following parameters in Ω/phase referred to the stator: R,-0.220, Xi = 0.430, X,-15.0, R2 0.130 and X2-0.430. Mechanical and core losses amount to 300 W and 200 W respectively for rated voltage. (a) The motor is fed with a 60 Hz, 208 V voltage. It runs with a slip of 4.5 %. Find the speed, shaft torque and power, efficiency and power...
A 480 V, 60 Hz, 4-pole-pair, three-phase, delta-connected induction motor has the following parameters: R1=0.42 Ω, R2=0.23 Ω, X1=0.48 Ω, X2=0.29 Ω, Xm=29.71 Ω where: R1 is the stator resistance R2 is the rotor resistance reflected in the stator; X1 is the stator leakage inductance; X2 is the rotor leakage inductance reflected in the stator; Xm is the magnetising inductance; The rotational losses are 2450 W. The motor drives a mechanical load at a speed of...
A 3-phase, 460 V, 1740 rpm, 60 Hz, 4-pole wound-rotor induction motor has the following parameters per phase: R1 = 0.25 Ω, ' 2R = 0.2Ω, ' 1 2 X = X = 0.5Ω, 30 m X = Ω. The rotational losses are 1700 W. With the rotor terminals short-circuited, find: 1. at starting: • current when started direct on full voltage, • a torque 2. at full load: • slip • current • ratio of starting current to full-load...
6.12 A three-phase, Y-connected, 460-V (line-line), 37-kW, 60-Hz, four-pole induction motor has the following equivalent-circuit parameters in ohms-per-phase referred to the statr: R10.070 R2 0.152 X 0.743 X2 0.764 Xm 40.1 The total friction and windage losses may be assumed constant at 390 W, and the core loss may be assumed to be equal to 325 W. With the motor connected directly to a 460-V source, compute the speed, output shaft torque and power, input power, and power factor and...
A four-pole Y-connected, 415 V, 50 Hz, induction motor has phase equivalent circuit parameters of R1= 2 ohms. R2=2.2 ohms. X1=X2=4 ohms. X(motor)=90 ohms Under rated condition, the rotor slip is 6%. (i) What is the rotor speed and rotor electrical frequency under the rated conditions; (ii) Calculate the stator input current, power factor, and electromagnetic torque under these conditions; (iii) The machine is running at rated conditions and it is to be stopped by switching the two stator leads....
A single-phase, 230 V, 50 Hz, 8 pole, Induction Motor has the following equivalent circuit parameters: Z1 = 1.7 + j 2.7 Ω ZF = 12 + j 20 Ω ZB = 1.2 + j 2.4 Ω If the core loss is 84 W, while the friction and windage loss is 100 W at 5% slip. Determine: The line current drawn by the machine. (4) The power factor. (1) The input power. (2) The air-gap power. (3) The converted power. ...
A 230 V, 50 Hz, three-phase, Y-connected, 6-pole induction motor has the following per-phase parameters R-0.07 Ro 00 0.08 Ω x, x, 0.3 xm 6.33 At a slip of 2%, determine the followings using approximate equivalent circuit of the motor i) The motor speed in rev/min and rad/s. ii) The rotor current. ii) The stator current. iv) The induced torque. v) The efficiency of the motor.
The following test data apply to a 7.5-hp, three-phase, 220-V, 19-A, 60-Hz, four-pole induction motor with a double-squirrel-cage rotor of design class C (high-starting-torque, low-starting current type): Test :No-load test at 60 Hz; Applied voltage V - 219 V line-to-line; Average phase current I, nl 5.70 A; Power Pnl -380 W; Test 2: Blocked-rotor test at 15 Hz; Applied voltage V 26.5 V line-to-line; Average phase current lbl 18.57 A; Power Pbl 675 W; Test 3: Average de resistance per...