A hydraulic oil with a kinematic viscosity of 4 x 10-4 m2/s and specific gravity of 0.89 flows in a 22 mm diameter pipe at 3 m/s. Determine the head loss (in bar) due to friction for a 95 m long pipe.?
A hydraulic oil with a kinematic viscosity of 4 x 10-4 m2/s and specific gravity of...
2. The kinetic viscosity of a hydraulic oil is 110cP. The oil is flowing in a 20-mm diameter commercial steel pipe with the length of 45-m. If the velocity of oil is 4-m/s and specific gravity is 0.9 find the following a. Reynolds number b. Friction factor c. Head losses.
2. The kinetic viscosity of a hydraulic oil is 110cP. The oil is flowing in a 20-mm diameter commercial steel pipe with the length of 45-m. If the velocity of...
Oil with a density of 850 kg/m and kinematic viscosity of 0.00062 m2/s is being discharged from a 5-mm-diameter, 40-m-longhorizontal pipe from a storage tank open to the atmosphere. The height of the liquid level above the center of the pipe is 3-m. If the friction factor (f) of the pipe is 0.006. Disregarding the minor losses, determine the flow rate of oil through the pipe. 11. 3 m Oil tank 5 mm
2. When gasoline with a kinematic viscosity of s x 10-7 m'l's flows in a 200-mm-diameter smooth pipe the friction head loss is 0.43 m per 100 m. Find the flow rate.
The kinematic viscosity of a hydraulic oil is 89 cS. If it is flowing at 17 ft/sec through a 2 in-diameter commercial steel pipe, what is the friction factor?
LECTURE Sp 1. Oil (relative density 0.85, dynamic viscosity-4.5x10-2kg/m-s) flows through a 75 mm diameter pipe with a mean velocity of 0.65 m/s. Determine i. the pressure drop in a 500 m length, ii- the friction factor, ii the head loss due to friction, iv. the maximunn velocity, and v. the velocity at 30 mm from the pipe wall. (10 marks) 46 2 9 3 8 4 5 6
help me to answer question 9,11,13 please
Oilspecific gravity 0.85 and dynamic viscosity 1.52 x 103 Pa.s to flow in a 550 mm diameter uPVC pipe. The allowable friction head loss is imited to 15 m and length of pipe is 100 m. al using Darcu-Weisbach formula, determine the flow velocity, the friction factor and the flow rate. using Hazen-Wiiams formula, determine the velocity and the flow rate. MoN 10 Water must flow in a straight 450 mm diameter galvanized...
Question 4 Oil flows with a velocity of 4 m/s through a 30 mm diameter tube. A model of this system is to be developed using standard air as the model fluid. The air velocity is to be 2 m/s. What tube diameter is required for the model if dynamic similarity is to be maintained between model and prototype? Kinematic viscosity of air = 16 x 105 m2/s, Kinematic viscosity of oil 1,2 x 103 m2/s 0.45 mm 0.8 mm...
Oil flows with a velocity of 4 m/s through a 30 mm diameter tube. A model of this system is to be developed using standard air as the model fluid The air velocity is to be 2 m/s What tube diameter is required for the model if dynamic similarity is to be maintained between model and prototype? Kinematic viscosity of air = 1.6 x 10-5 m2/s, Kinematic viscosity of oil = 1.2 x 10-3 m2/s 0.45 mm 0.8 mm 4.5...
2. Water flows at a rate of 60 L/s from a main reservoir to a subsidiary through a 600 m long, 185 mm diameter asphalted cast iron pipe as shown in the figure. The pipeline contains a gate valve, a globe valve and 4 standard 90° elbows. The entrance and exit are square edged, and all fittings are screwed ends, determine, You need Kinematic viscosity of water, 1 x 10-6 m/s2 (a) The friction head loss in the pipe, (b)...
A Newtonian fluid having a specific gravity of 0.9 and a kinematic viscosity of 0.000498 m 2/s flows past a fixed surface. The velocity profile near the surface is shown in the figure below. Given that the maximum velocity U is 4 m/s and the thickness of fluid is 11 cm. Determine the magnitude of the shearing stress developed on the fixed surface. Assume density of water 1000 kg/m 3 UI 5-sin(35) Fixed surface Format answer: 46.8