Q.2 A 2002 resistor(R), a 150mH inductor (L), and a 2-uF capacitor (C) are in series....
Rs 100Ω resistor C- 10 uF capacitor L- 120 mH inductor Write the impedance Z [Q] equation for the circuit shown in Figure 1. This formula should be in term of the frequency (f), not for angular frequency (). (using MATLAB) 1. From the above formula, plot power factor versus frequency over the frequency range 0 Hz to 1000 Hz. You may use a MATLAB program to do the plotting. 2. Find the frequencies for; Maximum power factor, Minimum power...
An inductor (L = 365 mH), a capacitor (C = 4.43 uF), and a resistor (R = 6052) are connected in series. A 50.0 Hz AC source produces a peak current of 250 mA in the circuit. (a) Calculate the required peak voltage AV max (b) Determine the phase angle by which the current leads or lags the applied voltage. Step 1 The total impedance depends on the frequency and the resistance of the circuit. The voltage amplitude is in...
1. A resistor R and capacitor care connected in series with an AC voltage source with frequency f and maximum voltage Vo. a. Find the complex impedance (in the form Z = R + jX). If the impedance is written in polar form (Z = Zejº), find expressions for Z and Ⓡ. Write your answers in terms of the variables R, C, and o(= 21f). b. If the voltage source is described by the phasor V = V, ejwt, and...
2. A resistor R and inductor L are connected in series with an AC voltage source with frequency fand maximum voltage Vo. a. Find the complex impedance (in the form Z = R + jX). If the impedance is written in polar form (Z = Zejo), find expressions for Z and Ø. Write your answers in terms of the variables R, L, and o(= 21f). b. If the voltage source is described by the phasor V = Voejut, and the...
A resistor (R = 9.00 x 102.2), a capacitor (C = 0.250 uF), and an inductor (L = 1.70 H) are connected in series across a 2.40 x 102-Hz AC source for which AVmax = 1.50 x 102 V. (a) Calculate the impedance of the circuit. Ο ΚΩ (b) Calculate the maximum current delivered by the source. (c) Calculate the phase angle between the current and voltage. (d) is the current leading or lagging behind the voltage? The current leads...
An LC circuit consists of a 3.10 mH inductor and a 5.07 uF capacitor. (a) Find its impedance at 60.8 Hz. (b) Find its impedance at 11.6 kHz. Ω (C) Now a 36.6 12 resistor is added in series with the inductor and capacitor. Find the impedance of this RLC circuit at 60.8 Hz and 11.6 kHz. At 60.8 Hz At 11.6 kHz (d) Compare the values of Z in parts (a) and (b) with those found in part (c),...
a. b. C. A 250-ohm resistor, a 0.450 H inductor, and a 6.45 uF capacitor are connected in series across an emf with a 36.0 volt amplitude and an angular frequency of 260 rad/s. What is the impedance? What is the current amplitude? What is the phase angle between the voltage and current? Does the voltage lag or lead? What are the voltage amplitudes across the resistor, inductor and capacitor individually? What is the power? f. What is the resonant...
An inductor (L = 400 mH), a capacitor (C = 4.43 uF), and a resistor (R = 500 2) are connected in series. A 52.0-Hz AC generator connected in series to these elements produces a maximum current of 440 mA in the circuit. (a) Calculate the required maximum voltage AV max. (b) Determine the phase angle by which the current leads or lags the applied voltage. The current ---Select--- the voltage by a magnitude of
Help please? Q-21.5 Unanswered An inductor (L = 400 mH), a capacitor (C = 4.43 uF), and a resistor (R = 500 ) are connected in series. A 58.0 Hz AC generator connected in series to these elements produces a maximum current of 200 mA in the circuit. Calculate the required maximum voltage AVmax. 138 A 144 v 138 V 144 mv Q-21.6 Unanswered An inductor (L = 400 mH), a capacitor (C = 4.43 uF), and a resistor (R...
#3. A 250-ohm resistor, a 0.450 H inductor, and a 6.45 uF capacitor are connected in series across an emf with a 36.0 volt amplitude and an angular frequency of 260 rad/s. a. What is the impedance? b. What is the current amplitude? c. What is the phase angle between the voltage and current? Does the voltage lag or lead? d. What are the voltage amplitudes across the resistor, inductor and capacitor individually? e. What is the power? f. What...