actual power by generator = 750 kw
power produced by generator = 750/.75 =1000 kw
mechanical power= generator power/ effciency of turbine
= 1000/08 =1250 kw
3. What is the mechanical power (kW) of the turbine? How much power (kW) does the...
A 65-V generator supplies 3.3 kW of power. How much current does the generator produce?
A 2000 kW turbine –generator of 0.85 power factor operates at the rated load. An additional load of 300kW at 0.8 power factor is added. Determine the required kVAR of capacitor to operate the turbine generator but keep it from being overloaded.
9) Electrical power is to be generated by installing a hydraulic turbine-generator at a site 70 m below the free surface of a large water reservoir that can supply water at a rate of 1500 kg/s steadily. If the mechanical power output of the turbine is 800 kW and the electric power generation is 350 kW, determine the turbine efficiency and the combined turbine-generator efficiency of this plant. Neglect losses in the pipes. (10pts).
A wind turbine with eight poles, 60 Hz three-phase, Y-connected induction generator is delivering 500 kW to the grid at 0.7 pf lagging. The terminal voltage of the generator is 690 V The electrical efficiency of the generator is 90% and the mechanical efficiency is 92%. The parameters of the machine are12 3. parameters of the machine are n.'s-0.02candx,-0.1Ω Compute the following: (Total points 17) a. Mechanical power received from wind. (Points 5) b. Developed power. (Points 5) c. Stator...
Question 1 Answer saved A wind turbine produces 779.1 kW of power when the wind blows with a speed of 8.2 m/s. How much power will the wind turbine produce in 5.4 m/s winds? Give your answer in kW, rounded to 1 decimal place. Marked out of 2.0 P Flag question Answer:
power plant /Steam Turbines/Impules Turbine
i need solution in 30 minutes
Q2) A single stage simple impulse turbine generator set is to operate under the following conditions. Steam at inlet :8 bar, dry saturated Exhaust :0.2 bar Nozzle efficiency :0.9 Nozzle angle :15° Internal efficiency :0.75 Mechanical efficiency :0.92 Generator efficiency :0.9 Find (a) the mean blade speed for maximum blading efficiency, (b) the steam flow rate for developing 200 kW.
wGTC η.cn = 95% Gas turbine cycle (GTc) e,I = 100 kW Compressor Turbine Generator 께,- Combustor Pi 100 kPa Regenerator Evaporator Turbine Generator Vapor turbine cycde (VTC) T, = T, + 20 K Condenser 10 Pump Saturated liquid A combined cycle plant operates with a topping gas turbine and a bottoming vapor turbine cycle. The working fluid in the vapor turbine cycle is water. The gas turbine cycle (GTC) electric generator produces 100kW of electric power For air use...
What power to be supplied by turbine to the shaft of generator? The discharge supplied by the penstock is 9.99 m/s, h = 1.9 m, efficiency of the turbine is 70%. Water temperature is 10°C. Elevation 99 m Perstock Powerhouse Elevation 49 m Turbine P6734 kW P-4714 kW P-3300 W P = 3300 kW
Question 1 Answer saved A wind turbine produces 779.1 kW of power when the wind blows with a speed of 8.2 m/s. How much power will the wind turbine produce in 5.4 m/s winds? Give your answer in kW, rounded to 1 decimal place. Marked out of 2.0 P Flag question Answer:
A steam turbine operates adiabatically at a power level of 3,500 kW. Steam enters the turbine at 2,400 kPa and 500 °C and exhausts from the turbine as saturated vapor at 20 kPa. What is the steam rate through the turbine and what is the turbine efficiency? 1.