nominal temperature of 660K and heptane 3. Assume that air enters a combustor at a (C-H16)...
Methane gas is burned with 30 percent excess air. This fuel enters a steady-flow combustor at 0.9 atm and 25'C and is mixed with the air. The products of combustion leave this reactor at 0.9 atm and 1600 K. Determine the equilibrium composition of the products of combustion and the amount of heat released by this combustion in kJ/kmol methane. Use data from the tables. CH4 Combustion 25℃ CO, HO 1600 K 30%acess 25 C The amount of carbon dioxide...
Air enters an adiabatic nozzle at 500 kPa and a temperature of 200 °C with a velocity of 100 m/s. It exits the nozzle at a pressure of 100 kPa. Assuming that the expansion through the nozzle occurs reversibly, determine (a) the exit temperature and (b) the exit velocity of the air. The specific heats of air can be assumed to be constant with Cv = 0.742 kJ/kg oC and Cp = 1.029 kJ/kg oC.
Formul Question 2 (50 points): Propane gas and burns with 20% excess air entering (molar C, Hs) at 25 C.I atm enters a reactor operating at steady state at 25 C l atm of the carbon entering with the fuel, 94% s) appears in the products at CO2 and the rest as CO. Heat transfer from the reactor occurs te of 1.4 x 10° kJ per kmol or propane. Use your ideal gas tables to answer this question. ite the...
3. Air enters a constant area duct at a Mach number of 0.14, a pressure of 195 kPa, and a temperature of 25 °C. Heat is added to the air that flows through the duct at a rate of 65 kJ/kg of air. Assuming that the flow is steady and that the effects of wall friction can be ignored, find the temperature, pressure, and Mach number at which the air leaves the duct. Assume that the air behaves as a...
Problem #3 (50 pts) Liquid ethanol burns steadily with air supplied at 33 phase) exit at 1000 K. 1 atm. A dry molar analysis CO, 16.6%; N, 80.24%. Atomic weights Ignore kinetic and potential energy effects. (1) (12 pts) Write down the chemical reac uid ethanol (CH.OH) at 298K. 1 atm enters a combustion chamber and Pplied at 350K. 1 atm. The combustion products (with water in the gas molar analysis of the combustion products gives CO., 3.16%; omic weights...
Methane gas is burned with 30 percent excess air. This fuel enters a steady- flow combustor at 0.8 atm and 25oC and is mixed with the air. The products of combustion leave this reactor at 0.8 atm and 1600 K. Determine the equilibrium composition of the products of combustion and the amount of heat released by this combustion in kJ/kmol methane. Use data from the tables CH 25°C CO2, H3O chamber NO. O2 N2 1600 K 30% excess air 25°C...
5) Evaluating Changes in Entropy for an Ideal Gas Air enters a turbine at 427 °C and 1 MPa and exits at 127 °C. The outlet pressure can be tuned by the operator in the range from 300 - 800 kPa. Determine the change in specific entropy of the air, se -si, as it flows through this turbine 3 ways a) Assuming constant specific heats. b) Integrating an appropriate formula from Table A-2(c) from the text, which gives a polynomial...