Homework Answers
Add Answer to:
1) Water is pumped steadily through a 0.10 m diameter pipe from one closed, pressurized tank...
Air is pumped at a rate of 10L/min from one pressurized tank to another through a reducing bend a...
Air is pumped at a rate of 10L/min from one pressurized tank to another through a reducing bend as shown in the figure below. The bend has a diameter of 5cm on the side of Tank 1 and 1cm on the side of Tank 2. If the angle of the bend, 0, is (a) 30 or (b) 0 what is the force exerted by the pipe walls on the fluid? If the whole system is put on a cart and...
Water is released from a water tank through a pipe to the atmosphere. The pipe diameter...
Water is released from a water tank through a pipe to the
atmosphere. The pipe diameter is 8 mm
and the length is 6 m. Water temperature is 15 oC. The
resistance coefficient of the pipe f = 0.015
and the difference between the water surface and the pipe outlet is
3 m. Determine the exit velocity
of water and sketch the Hydraulic Grade Line (HGL) and Energy Grade
Line (EGL) along the pipe.
Assume that minor loss can be...
Water is being pumped from a lower reservoir to an elevated tank as shown below. The...
Water is being pumped from a lower reservoir to an elevated tank as shown below. The pump is 80% efficient and rated at 200 kW. Determine the flow rate if the total head loss from point 1 to point 2 is 15 m. elev. 100 m 150-mm diameter pipe pump 180-mm diameter pipe elev. 50 m water
Oil (density = 910Kg/m3 and viscosity 3.1 x10-3 Pa-s) is pumped from an open tank to...
Oil (density = 910Kg/m3 and viscosity 3.1 x10-3 Pa-s) is pumped from an open tank to a pressurized tank held at 400KPa gauge. The oil is pumped from an inlet at the side of the open tank through a line of commercial steel pipe (inside diameter 0.8m) at a rate of 5x10-3 m3/s. The length of the straight pipe is 150 m, and the pipe contains 4 (90-degree) elbows and two globe valve half open. The level of the liquid...
Two large tanks are open to the atmosphere at the top. Water s pumped from the lower tank to the upper tank through a si...
Two large tanks are open to the atmosphere at the top. Water s
pumped from the lower tank to the upper tank through a single PVC
(smooth) pipe. The relationship between Velocity in the pipe (ft/s)
and the pump head (ft) is given. There are no significant minor
losses. What is the flow rate, Q (cfs), in the pipe?
Pump Coefficients 1.30 sec /ft Pipe Length Inside Pipe Diameter 300 ft 0.250 feet a = 3.24 sec b 107.00 ft...
Single pipe with turbine) Water drains from a pressurized tank through a pipe system as shown...
Single pipe with turbine) Water drains from a pressurized tank through a pipe system as shown in the figure below. The head of the turbine is equal to 116 m. If entrance effects are negligible, determine the flowrate. 50 kPa e 200 m, D 0.1 m -0.0010 m Valve (K1 -5.0) 200 m Turbine 90 elbows (K 1.0) 0-L :0389 m3/s
8-C) As shown below water is pumped and sprayed through a nozzle into the atmosphere at 20 m/s at...
8-C) As shown below water is pumped and sprayed through a nozzle into the atmosphere at 20 m/s at an elevation 10 m above the reservoir surface. The mass flow rate is 40 kg/s and the volumetric flow rate is 0.040 m3/s. The large diameter inlet pipe total length is 50 m. The pump effidency is 65%. The longer smaller diameter pipe leaving the pump is 200 m in total length. The pipes have different diameters as indicated below. The...
Erample 12.7. Water is being pumped at the rate of 20 l/s to an overhead tank...
Erample 12.7. Water is being pumped at the rate of 20 l/s to an overhead tank through a 15 cm diameter 300 m long delivery pipe. In the tank pipe discharges freely at height of 15 m above the pump. If head loss h = 0.03 for pipe, determine the pressure developed by the pump on its delivery side and power required to lift the water. Assume first 285 m of pipe is horizontal and rest is vertical.
Q3 (40 pts): Water is pumped through a 60-m-long, 0.3-m-diameter pipe from a lower reservoir to...
Q3 (40 pts): Water is pumped through a 60-m-long, 0.3-m-diameter pipe from a lower reservoir to a higher reservoir, which has a water surface 10 m above the lower one. When the pump adds 40 kW to the water the flowrate is 0.20 m/s. Assume the following coefficients of minor losses: • Entrance: Kentrance = 0.5 Exit: Kexit = 1 Each elbow: Kelbow = 1.5 • Valve: K= 6 Part A (20 pts) Determine the pipe roughness ε. Part B...
1. (25pt) Water at room temperature is pumped through a smooth pipe. The pipe has diameter...
1. (25pt) Water at room temperature is pumped through a smooth pipe. The pipe has diameter of 10cm. The total length is 10 km. The discharge is 80 m²/h. A pump is installed at the inlet. At the exit of pump, the absolute pressure of the water is 25 atm. The exit exposes to the atmosphere and its elevation is 100 m higher than the inlet. Estimate the frictional head loss hf.
Air is pumped at a rate of 10L/min from one pressurized tank to another through a reducing bend as shown in the figure below. The bend has a diameter of 5cm on the side of Tank 1 and 1cm on the side of Tank 2. If the angle of the bend, 0, is (a) 30 or (b) 0 what is the force exerted by the pipe walls on the fluid? If the whole system is put on a cart and...
Water is released from a water tank through a pipe to the
atmosphere. The pipe diameter is 8 mm
and the length is 6 m. Water temperature is 15 oC. The
resistance coefficient of the pipe f = 0.015
and the difference between the water surface and the pipe outlet is
3 m. Determine the exit velocity
of water and sketch the Hydraulic Grade Line (HGL) and Energy Grade
Line (EGL) along the pipe.
Assume that minor loss can be...
Water is being pumped from a lower reservoir to an elevated tank as shown below. The pump is 80% efficient and rated at 200 kW. Determine the flow rate if the total head loss from point 1 to point 2 is 15 m. elev. 100 m 150-mm diameter pipe pump 180-mm diameter pipe elev. 50 m water
Two large tanks are open to the atmosphere at the top. Water s
pumped from the lower tank to the upper tank through a single PVC
(smooth) pipe. The relationship between Velocity in the pipe (ft/s)
and the pump head (ft) is given. There are no significant minor
losses. What is the flow rate, Q (cfs), in the pipe?
Pump Coefficients 1.30 sec /ft Pipe Length Inside Pipe Diameter 300 ft 0.250 feet a = 3.24 sec b 107.00 ft...
Single pipe with turbine) Water drains from a pressurized tank through a pipe system as shown in the figure below. The head of the turbine is equal to 116 m. If entrance effects are negligible, determine the flowrate. 50 kPa e 200 m, D 0.1 m -0.0010 m Valve (K1 -5.0) 200 m Turbine 90 elbows (K 1.0) 0-L :0389 m3/s
8-C) As shown below water is pumped and sprayed through a nozzle into the atmosphere at 20 m/s at an elevation 10 m above the reservoir surface. The mass flow rate is 40 kg/s and the volumetric flow rate is 0.040 m3/s. The large diameter inlet pipe total length is 50 m. The pump effidency is 65%. The longer smaller diameter pipe leaving the pump is 200 m in total length. The pipes have different diameters as indicated below. The...
Erample 12.7. Water is being pumped at the rate of 20 l/s to an overhead tank through a 15 cm diameter 300 m long delivery pipe. In the tank pipe discharges freely at height of 15 m above the pump. If head loss h = 0.03 for pipe, determine the pressure developed by the pump on its delivery side and power required to lift the water. Assume first 285 m of pipe is horizontal and rest is vertical.
Q3 (40 pts): Water is pumped through a 60-m-long, 0.3-m-diameter pipe from a lower reservoir to a higher reservoir, which has a water surface 10 m above the lower one. When the pump adds 40 kW to the water the flowrate is 0.20 m/s. Assume the following coefficients of minor losses: • Entrance: Kentrance = 0.5 Exit: Kexit = 1 Each elbow: Kelbow = 1.5 • Valve: K= 6 Part A (20 pts) Determine the pipe roughness ε. Part B...
1. (25pt) Water at room temperature is pumped through a smooth pipe. The pipe has diameter of 10cm. The total length is 10 km. The discharge is 80 m²/h. A pump is installed at the inlet. At the exit of pump, the absolute pressure of the water is 25 atm. The exit exposes to the atmosphere and its elevation is 100 m higher than the inlet. Estimate the frictional head loss hf.
Most questions answered within 3 hours.
-
3) What are the typical social structures in a global city?
asked 1 minute from now -
Luther Corporation
Consolidated Balance Sheet
December 31, 2019 and 2018 (in $ millions)
Assets
2019
2018...
asked 38 seconds ago -
(Expected rate of return and risk) Carter Inc. is evaluating a
security. Calculate the investment’s expected...
asked 2 hours ago -
What specific indicators can point to lack of progress for
African Americans in American society?
asked 3 hours ago -
1-The Electrons in a beam are moving at 2.7×108 m/s in an
electric field of 15000...
asked 3 hours ago -
A gas tank is a vertical cylinder. It has a radius of 1m, a
height of...
asked 4 hours ago -
Accent Software faces the following conditions. All of these
support Accent’s use of a market-penetration pricing...
asked 5 hours ago -
A mathematically inclined friend emails you the following
instructions: "Meet me in the cafeteria the first...
asked 5 hours ago -
A monopoly sells in two countries . The demand curves in the two
countries are p1...
asked 6 hours ago -
A .15kg rubber ball is bounced off a wall. Before hitting the
wall, the ball moves...
asked 7 hours ago -
A manufacturing company preparing to build a new plant is
considering three potential locations for it....
asked 7 hours ago -
B. If compound Y has approximately the same values of solubility
in toluene as compound X,...
asked 7 hours ago