Design a combinational circuit that adds 1 to 3-bit unsigned binary number and produces an unsigned...
Design a combinational circuit which inputs a three-bit binary number, and outputs the input number PLUS two if the input is less then or equal to 3, and outputs the minus two if the input is greater than 3. This should include the truth table for the operation, the karnaugh map(s), and the resulting circuit.
Design a circuit to add two 2-bit binary numbers and display the results of the addition as a 3-bit binary number, with the most significant bit be the carry out. To do this, you will use the four switches on your Breadboard Companion as your two 2-bit number inputs. Three of your LEDs will be used to represent the 3-bit output of your circuit. Complete a truth table for the expected output values on the lab data sheet attached. Use...
Q2 (20pts) Design a combinational ct that accepts an input 3-bit binary number (XYZ) and generates an output 4-bit binary number (ABCD) where output equal to the double of the input number. (a) Construct the truth table (b) State each output-bit as a function in sum of minterms (SOM) form: (c) State each output-bit as a function in product of maxterms (POM) form: ΠΜ(.) (d) Optimize the circuit using K-maps and find the simplified functions Show your work full-credit. Q3...
design and build a 4 bit binary multiplier that multiplies two 4 bit unsigned positive numbers to generate a 8 bit unsigned positive number. using full adders. do not use 4 bit multiplier chip. use truth table, karnaugh map and simplified output expression of the circuit.
3) [9 marks] Using the combinational circuit design procedure discussed in the notes, design with a truth-table, simplify with K-maps, and draw the combinational circuit that accepts a 3-bit number and generates a 5-bit number output equal to 3X + 2 where X is the input number (if the input is 010 (2), the output should be (01000) 8 . Let the inputs be A, B, C and the outputs be V, W, X, Y, Z.
1. Using only half adders, design a four-bit incrementer circuit (a circuit that adds 1 to a four- bit binary number). 2. Using only 2-to-4 line decoders with enable, construct a 4-to-16 line decoder. 3. Using a decoder and external gates, design the combinational circuit defined by the following three Boolean functions: F = x'y'z' + x2 F2 = xy'z' + x'y F3 = x'y'z + xy
DESIGN SECTION You are going to design which has 4 inputs wi L V. and 4 outputs A, B.Cand D. The features of the circuit are; a combinational eircuit Inputs (w, x, y, z) Binary Code Outputs (A, B, C, DGray Code The circuit encodes Input Bit Sequence (Binary Code) to Gray Code. You are going to; a) Fill the truth table according to your design. b) Find the simplified AND-OR expressions for all 4 outputs (Sum of Product) by...
Design a combinational circuit that accepts a 2-bit number and generates a 4-bit binary number output equal to the square of the input number. Use Decoder and any other external gates as necessary to implement your design. Draw the logic diagram and clearly label all input and output lines.
Design a four-bit combinational circuit 2’s complementer. (The output generates the 2’s complement of the input binary number.) Show that the circuit can be constructed with exclusive-OR gates. Can you predict what the output functions are for a five-bit 2’s complementer? 1. Truth table 2. Logic circuit with exclusive-OR gates 3.The output functions for a five-bit 2’s complementer
Digital design question. Combinational logic & building blocks. 9.1 Voting circuit. Using combinational building blocks such as adders, comparators, mul- tiplexers, decoders, encoders, and arbiters, as well as logic gates, design a circuit that accepts five three-bit one-hot numbers and outputs the three-bit one-hot number that occurred most often on the inputs. Ties can be broken in any manner. For example, if the inputs are 100, 100, 100, 010, and 001, the output will be 100