Question 4: A bar 10 cm long and 5 mm in thickness extends straight from a...
Question 4: A bar 10 cm long and 5 mm in thickness extends straight from a molding at 212.5 °C. The bar is in an air with ?∞ = 32.5°C and h = 30 W/m2 .K. Calculate the temperature of the bar 20, 40, and 80 mm from the molding? (The rod material is brass)
Homework Answers
Add Answer to:
Question 4: A bar 10 cm long and 5 mm in thickness extends
straight from a...
3.106 A brass rod 100 mm long and 5 mm in diameter extends horizontally from a...
3.106 A brass rod 100 mm long and 5 mm in diameter extends horizontally from a casting at 200°C. The rod is in an air environment with T = 20°C and h = 30 W/m - K. What is the temperature of the rod 25, 50, and 100 mm from the casting?
6 brass rod 100 mm long and 5 mm in diameter 3.1 extends horizontally from a casting at 200°C. Th...
6 brass rod 100 mm long and 5 mm in diameter 3.1 extends horizontally from a casting at 200°C. Th is in an air environment with Too = 20°C and h = 30 Wim.K. What is the temperature of the rod 25, 50, and 100 mm from the casting? 10 e rod We were unable to transcribe this image
6 brass rod 100 mm long and 5 mm in diameter 3.1 extends horizontally from a casting at 200°C. Th is...
Problem 3-2 A brass rod 100 mrn long and 5 mm in diameter extends horizontally from...
Problem 3-2 A brass rod 100 mrn long and 5 mm in diameter extends horizontally from a casting at 203°C. The rod is in an air environment with T-25°C and h- 30 W/m2K. Determine the temperature of the rod 75 and 100 mm from the casting. The thermal conductivity of brass is 133 W/mK
One end of a long rod 3 cm in diameter is inserted into a furnace with the
One end of a long rod 3 cm in diameter is inserted into a furnace with the (3 outer end projecting into the outside air. Once the steady state is reached the temperature of the rod is measured at two points, 15 cm apart and found to be 140°C and 100°C, when the atmospheric air is at 30°C with convection coefficient of 20 W/m2.K. Calculate the thermal conductivity of *.the rod material Consider a stainless steel spoon(k = 15.1 W/m.K), partially...
A long steel bar with a diameter of 4 cm (ρ = 7840 kg / m3...
A long steel bar with a diameter of 4 cm (ρ = 7840 kg / m3 , cp = 580 J / kg ° K, k = 52 W / mK, α = 1.21x10-5 m2 / s), internal enters the 2 m long moving belt heat treatment furnace at ambient temperature of 900 ° C at 40 ° C. Since the film coefficient in the oven is 100 W / m2K, the center axis temperature of the bar at the...
A brass rod (k = 133 W/m-K) with a diameter of 5 mm and a length...
A brass rod (k = 133 W/m-K) with a diameter of 5 mm and a length of 100 mm is used to enhance heat transfer from a surface which is maintained at 200 C. The cylindrical surface of the rod is exposed to a convection environment with h = 30 W/m2-K and an ambient temperature of 20 C. a) Calculate the heat convected away from the rod. b) Calculate the temperature 50 mm from the wall. c) Plot the temperature...
4. A long square steel bar 2L - 7 cm wide by 21 - 7 cm...
4. A long square steel bar 2L - 7 cm wide by 21 - 7 cm high having a thermal conductivity k, = 14 W/n'c and a thermal diffusivity a 3.63x10 m/s is hot rolled at T. - 615°C and then cooled by air issuing from jets at T. -30°c. After t - 287 s have elapsed, the temperature at the center of the bar T(0,0,t) - 240c and the temperature at the corners of the bar T(L,Lt) - 125c....
1. A steel tube [k 15 W/(m.°C)] of outside diameter 7.6 cm and thickness 1.3 cm...
1. A steel tube [k 15 W/(m.°C)] of outside diameter 7.6 cm and thickness 1.3 cm is covered with an insulation material [k 0.2 W/(m. C)] of thickness 2 cm. A hot gas at 320°C with a heat transfer coefficient of 200 W/(m2.C) flows inside the tube. The outer surface of the insulation is exposed to cooler air at 20°C with a heat transfer coefficient of 50 W/(m2·°C). Calculate a) The heat loss from the tube to the air for...
A brass rod, 1 cm in diameter and 15 cm long, with a tip subject to...
A brass rod, 1 cm in diameter and 15 cm long, with a tip subject to a breeze with a convection coefficient of 68 W/m2 K in a room where the ambient air temperature is 23°C. The base is 79°C and the tip is designed to maintain a constant temperature of 29°C. The manufacturer finds that the thermal conductivity, in units of W/m*K, to be k(T) 43*In(T)- 128, where T is in units of Kelvin. Plot the temperature profile for...
A long rectangular copper bar of a cross section of 2cm by 3cm and a long...
A long rectangular copper bar of a cross section of 2cm by 3cm and a long cylindrical copper rod of 2.2 cm in diameter are initially at a uniform temperature of 120 °C. They are then exposed to a cooling air stream at 22 °C with a heat transfer coefficient of 180 W/m-K. Taking the properties of the copper to be k = 400 W/m-K and p-8930 kg/m', and C -0.385 kJ/kg-K, determine: a How long would it take for...
3.106 A brass rod 100 mm long and 5 mm in diameter extends horizontally from a casting at 200°C. The rod is in an air environment with T = 20°C and h = 30 W/m - K. What is the temperature of the rod 25, 50, and 100 mm from the casting?
6 brass rod 100 mm long and 5 mm in diameter 3.1 extends horizontally from a casting at 200°C. Th is in an air environment with Too = 20°C and h = 30 Wim.K. What is the temperature of the rod 25, 50, and 100 mm from the casting? 10 e rod We were unable to transcribe this image
6 brass rod 100 mm long and 5 mm in diameter 3.1 extends horizontally from a casting at 200°C. Th is...
Problem 3-2 A brass rod 100 mrn long and 5 mm in diameter extends horizontally from a casting at 203°C. The rod is in an air environment with T-25°C and h- 30 W/m2K. Determine the temperature of the rod 75 and 100 mm from the casting. The thermal conductivity of brass is 133 W/mK
4. A long square steel bar 2L - 7 cm wide by 21 - 7 cm high having a thermal conductivity k, = 14 W/n'c and a thermal diffusivity a 3.63x10 m/s is hot rolled at T. - 615°C and then cooled by air issuing from jets at T. -30°c. After t - 287 s have elapsed, the temperature at the center of the bar T(0,0,t) - 240c and the temperature at the corners of the bar T(L,Lt) - 125c....
1. A steel tube [k 15 W/(m.°C)] of outside diameter 7.6 cm and thickness 1.3 cm is covered with an insulation material [k 0.2 W/(m. C)] of thickness 2 cm. A hot gas at 320°C with a heat transfer coefficient of 200 W/(m2.C) flows inside the tube. The outer surface of the insulation is exposed to cooler air at 20°C with a heat transfer coefficient of 50 W/(m2·°C). Calculate a) The heat loss from the tube to the air for...
A brass rod, 1 cm in diameter and 15 cm long, with a tip subject to a breeze with a convection coefficient of 68 W/m2 K in a room where the ambient air temperature is 23°C. The base is 79°C and the tip is designed to maintain a constant temperature of 29°C. The manufacturer finds that the thermal conductivity, in units of W/m*K, to be k(T) 43*In(T)- 128, where T is in units of Kelvin. Plot the temperature profile for...
A long rectangular copper bar of a cross section of 2cm by 3cm and a long cylindrical copper rod of 2.2 cm in diameter are initially at a uniform temperature of 120 °C. They are then exposed to a cooling air stream at 22 °C with a heat transfer coefficient of 180 W/m-K. Taking the properties of the copper to be k = 400 W/m-K and p-8930 kg/m', and C -0.385 kJ/kg-K, determine: a How long would it take for...
Most questions answered within 3 hours.
-
Buying your in-laws a gift because it’s expected is
due to the ____________ motive of gift-giving....
asked 31 seconds from now -
Calculate the expected value, the variance, and the standard
deviation of the given random variable X....
asked 42 minutes ago -
A hospital performs 100 surgeries per week. The probability that
complications after surgery occur is 10%....
asked 58 minutes ago -
1 point) Given the significance level α=0.01 find the following:
(a) left-tailed z value z= (b)...
asked 40 minutes ago -
Assuming you are the head of the software development unit at
Cyber.Soft, explain and justify why...
asked 6 minutes ago -
Magnesium and nitrogen react in a combination reaction to
produce magnesium nitride. 3 Mg + N2...
asked 14 minutes ago -
Two electrons are initially at rest separated by a distance of
2nm. At time t=0, they...
asked 12 minutes ago -
A martial artist is practicing breaking 5 boards. He is able to
break aboard with probability...
asked 20 minutes ago -
The rate constant of a first-order reaction is 2.95 × 10−4 s−1
at 350.° C. If...
asked 23 minutes ago -
implement a class called PiggyBank that will be used to
represent a collection of coins. Functionality...
asked 14 minutes ago -
2. Use the following information in the table to answer the
following questions. (Numbers are in...
asked 20 minutes ago -
The fuel economy of a 2011 Lexus RX 350 2wd 6 cylinder 3.5 L
automatic 5...
asked 28 minutes ago