Air at stagnation pressure of 700 kPa and temperature of 530 K
enters a isentropic converging-diverging nozzle. The throat area of
the nozzle is
5 cm2, the exit area is 12.5 cm2. The back pressure is 350 kPa and
a normal shock occurs within a diverging section. Determine (a)
exit Mach number, (b) change in stagnation pressure, (c) upstream
and downstream Mach number of shock (d) cross sectional area where
shock occurs
(e) back pressure if the flow were isentropic throughout.
Air at stagnation pressure of 700 kPa and temperature of 530 K enters a isentropic converging-diverging...
A converging-diverging nozzle is designed for M - 2.5 at the exit. Air is supplied at 1000 kPa and 400 K. At design, what is the exit pressure, temperature and speed? b'At design, what is the throat pressure and temperature? c. What are the Mach number and speed (m/s) at the throat? I d. If the flow in the nozzle is isentropic, but a normal shock forms at the exit plane, what are the pressure, temperature and Mach number downstream...
This problem illustrates the effects of normal shock wave on an isentropic flow through a converging-diverging nozzle. Air flows through an isentropic converging-diverging nozzle The air stagnation pressure and temperature are 7.0 x10 N/m2 and 500 K, respectively The diverging portion of the nozzle has an area ratio of AJA 13.0. A normal shock wave stands in the diverging section where the Mach number is 4.0. Analyze the case to caleulate the Mach number and the static temperature and pressure...
UBAV Air flows through a converging-diverging nozzle diffuser. A normal shock stands in the diverging section of the nozzle. Assuming isentropie flow, air as an ideal gas, and constant specific heat determine the state at several locations in the system. Solve wsing equations rather than with the tables Note: The Specific heat ratio and gas constant for air are given as k-1 and R 0.287 kJ/kg-K respectively Give Values Inlet Temperature: TI(K)-340 Inlet pressure: P1 (kPa) - 550 Inlet Velocity:...
Normal Shock Nozzle Exit (4, -6 cm? Back pressure Air from a reservoir at 350 K and 500 kPa, flows through a converging-diverging nozzle. The throat area is 3 cm- and the exit area is 6 cm. A normal shock appears, for which the downstream (region 2) Mach number (M2) is 0.6405. Reservoir Throat (A = 3 cm (a) What is the Mach number (M]) upstream of the shock? 350K, 500 kPa (abs) (b) What is the area where the...
Normal Shock Nozzle Exit (4, -6 cm? Back pressure Air from a reservoir at 350 K and 500 kPa, flows through a converging-diverging nozzle. The throat area is 3 cm- and the exit area is 6 cm. A normal shock appears, for which the downstream (region 2) Mach number (M2) is 0.6405. Reservoir Throat (A = 3 cm (a) What is the Mach number (M]) upstream of the shock? 350K, 500 kPa (abs) (b) What is the area where the...
Normal Shock Nozzle Exit (4, -6 cm? Back pressure Air from a reservoir at 350 K and 500 kPa, flows through a converging-diverging nozzle. The throat area is 3 cm- and the exit area is 6 cm. A normal shock appears, for which the downstream (region 2) Mach number (M2) is 0.6405. Reservoir Throat (A = 3 cm (a) What is the Mach number (M]) upstream of the shock? 350K, 500 kPa (abs) (b) What is the area where the...
A converging-diverging nozzle has a throat area of 1 cm2 and an exit area of 4 cm2. The inlet stagnation conditions are Po 500 kPa and To 300 K. The nozzle discharges to an infinite surroundings at Po. The flowing medium is air as a perfect gas with k-1.4 Answer the following: i What are the two isentropic flow solutions for this nozzle with M 1 at the throat? What are the Mach number, P, Po and T, To at...
Poblem Comergini sentropie regim (no shock waves) Consider isentropic flow through a converging-diverging nozzle. The exit area of the nozzle is , and the throat area of the nozzle is . The air entering the nozzle has stagnation conditions: , and Use Figure D.1 or Table D (a) Calculate the mass flow rate for choked flow (that is, sonic flow at the throat). Hints: See Section 11.7, use Figure D.1 to find density and temperature at M 1 (throat), find...
Air flows through a converging-diverging nozzle/diffuser. Assuming isentropic flow, air as an ideal gas, and constant specific heats determine the state at several locations the system. Solve using equations rather than with the tables. Note: The specific heat ratio and gas constant for air are given as k=1.4 and R=0.287 kJ/kg-K respectively. --Given Values-- Inlet Temperature: T1 (K) = 353 Inlet pressure: Pl (kPa) = 546 Inlet Velocity: V1 (m/s) = 61 Area at nozzle inlet: A1 (cm^2) = 7.24...
Air flows through a converging-diverging nozzle/diffuser. Assuming isentropic flow, air as an ideal gas, and constant specific heats determine the state at several locations in the system. Note: The specific heat ratio and gas constant for air are given as k=1.4 and R=0.287 kJ/kg-K respectively. --Given Values-- Inlet Temperature: T1 (K) = 360 Inlet pressure: P1 (kPa) = 583 Inlet Velocity: V1 (m/s) = 105 Area at inlet (cm^2) = 8.2 Mach number at the exit = 1.86 a) Determine...