3. The fomula for flow through a randomly packed bed of spheres is given by Ergun's...
Q2- Mercury at 26.5 °C is flowing through a packed bed of lead spheres having a diameter of 2.096 mm with a void fraction of 0.499. The supepficial velocity is 0.02198 m/s. The solubility of lead in mercury is 1.721 wt%, the Schuidt number is 124.1, the viscosity of the solution is 1.577 x 10 Pas, and the density is 19530 kg/m'. Load Pb (M.W=207.2) and Mercury Hg (M.W = 200.6) a. Predict the value of Jo. b. Predict the...
1. Gas flow through a fixed bed A regenerative heater is a device where “waste" energy from a hot fluid is stored in some type of thermal storage medium before it is transmitted to a cold fluid. In this problem, you will analyze the flow of the cold fluid across a hot packed bed as it picks up the stored energy. This is a fluid flow problem, not a heat transfer problem. A packed bed of cubes (with side =0.6...
3 The fluid is flows through porous medium at 30°C with following configurations of packed bed column. Diameter of particle: 0.00168 m, velocity: 1.524 m/s, viscosity: 0.001 kg/m s & Density of fluid: 999 kg/m”, Bed Porosity: 0.033. The inside diameter of the packed bed column or pipe is 2 inch. Determine the draw the suitable schematic, Identify the flow pattern, Pressure Gradient (AP/AX), and Volumetric Flow rate (Q). (5 Marks)
3. Flow in a packed bed of particles is described by the Ergun equation: 1300 de+1.75 d 3 Liquid is to be pumped from A to E through a bank of four identical packed contactors arranged as shown in Figure 1. All losses in the large-diameter connecting pipework may be assumed to be negligible. The pressure at the delivery point E, which is 2m above the entry at A, must not fall below 50 kN/m2 gauge. Each contactor is of...