Assume that if the shear stress in steel exceeds about 4.0o x 108 N/m2, the steel...
Assume if the shear stress in steel exceeds about 4.00 108 N/m2 the steel ruptures. (a) Determine the shearing force necessary to shear a steel bolt 0.75 cm in diameter. N (b) Determine the shearing force necessary to punch a 2.60-cm-diameter hole in a steel plate 0.550 cm thick.
Assume if the shear stress in steel exceeds about 4.00 108 N/m2 the steel ruptures. (a) Determine the shearing force necessary to shear a steel bolt 1.25 cm in diameter. (b) Determine the shearing force necessary to punch a 2.60-cm-diameter hole in a steel plate 0.590 cm thick.
10. (S&J 12-21) Assume if the shear stress in steel exceeds about 4.00 x 10 N/m, the steel ruptures. Determine the shearing force necessary to: a. shear a steel bolt 1.00 cm in diameter; and b. punch a 1.00-cm-diameter hole in a steel plate 0.500 cm thick. 10. (S&J 12-21) Assume if the shear stress in steel exceeds about 4.00 x 10 N/m, the steel ruptures. Determine the shearing force necessary to: a. shear a steel bolt 1.00 cm in...
Need Help? Raxd it 3. O 0/2 points I s Answers SerCP10 9.P.012 MI FB Assume that if the shear stress in steel exceeds about 4.00 × 108 N/m2, the steel ruptures. (a) Determine the shearing force necessary to shear a steel bolt 1.40 cm in diameter Apply the definition of the shear stress to determine the force needed to shear the steel bolt as described. N b) Determine the shearing force necessary to punch a 1.50-cm-diameter hole in a...
5. Certain stainless steel has a shear stress limit 4.00x108 N/m2. Determine the shearing forces needed to: (a) Shear a stainless steel bolt 1.00cm in diameter (hint: force parallel to the top&bottom of the bolt) 10000 7 = 3.14.104N (b) Punch a 1.00 cm diameter hole in a stainless steel plate 0.50cm thick (hint: force parallel to the side of the hole)
If the shear stress in the steel exceeds 4.00x108 N / m2, it will break. Determine in Newtons the shear force required to cut a 5 cm diameter steel bolt.
Question 8. Section 2-3 Shear Stresses 6. In the bolted connection of Fig. 2-8, assume that the bolts are , in. in diameter and that the allowable shear stress for the bolts is 14,500 psi. Based on bolt shear only, compute the safe allowable load P that may be applied 7. Compute the force required to punch a 1 in. diameter hole through a ½ in, thick boiler plate. The ultimate shear strength for the material is 42,000 psi. 8....
Steel Young's Modulus (Y) 20 X 1010 N/m2 Shear Modulus (S) 8.1 X 1010 N/m2 Bulk Modulus (B) 16 X 1010 N/m2 The table to the above represents various properties of steel. You have steel wire 4.4 meters in length that stretches 0.12 cm when subjected to a force of 300 N. 1)What is the diameter of the wire? d1 =__________ cm 3)What would the diameter of the wire be if you wanted the wire to stretch 0.06 cm less...
A disk between vertebrae in the spine is subjected to a shearing force of 575 N. Find its shear deformation, taking it to have a shear modulus of 1.60 x 10' N/m². The disk is equivalent to a solid cylinder 0.800 cm high and 2.00 cm in diameter. Question Credit: OpenStax College Physics shear deformation:
A vertebra is subjected to a shearing force of 430 N. Find the shear deformation, taking the vertebra to be a cylinder 3.00 cm high and 5.00 cm in diameter. The shear modulus for vertebrae is 8.0 x 1010 N/m². shear deformation: m Question Credit: OpenStax College Physics