A 1000 KVA three phase transformer has a secondary voltage of 208/120. What is the secondary...
A 1000 KVA three phase transformer has a secondary voltage of 208/120. What is the
secondary full load amperage?
Homework Answers
Add Answer to:
A 1000 KVA three phase transformer has a secondary voltage of
208/120. What is the
secondary...
A three-phase Yy0 connected transformer has a nominal rating of 250 kVA and a voltage ratio...
A three-phase Yy0 connected transformer has a nominal rating of 250 kVA and a voltage ratio 15:0.4 kV. After conducting the short-circuit test, where the secondary winding is short-circuited, it is found that the primary series resistance is 0.08 pu and the primary series impedance magnitude is 0.1pu. The effect of the parallel branch in the transformer’s equivalent circuit may be neglected. Explain what information ‘Yy0’ gives about the transformer. Draw the per-phase equivalent circuit of the transformer during the...
A 150 KVA, 2080/208-V, 3 PHASE, delta-wye transformer with the following: RH 450m2 R 4.5m XH 2.20...
A 150 KVA, 2080/208-V, 3 PHASE, delta-wye transformer with the following: RH 450m2 R 4.5m XH 2.20 Load 120 KVA, 90KW (lagging power factor) at rated terminal voltage of 208V Determine a) b) c) The approximate equivalent circuit referred to the low-voltage side The primary voltage The transformer efficiency Please show the following: Circuit with the values given & found Equations used
A 150 KVA, 2080/208-V, 3 PHASE, delta-wye transformer with the following: RH 450m2 R 4.5m XH 2.20 Load...
4. [Transformer - 15 points) A 50-kVA, 13,800/208-V, A-Y distribution transformer has an equivalent resistance of...
4. [Transformer - 15 points) A 50-kVA, 13,800/208-V, A-Y distribution transformer has an equivalent resistance of 3 percent and a reactance of 9 percent per unit. (a) What is the transformer's phase impedance referred to the high-voltage side? (b) Calculate this transformer's voltage regulation at full load and 0.9 PF leading.
3. Three single-phase, 10 kVA, 460/120 V, 60 Hz transformers are connected to form a three-phase...
3. Three single-phase, 10 kVA, 460/120 V, 60 Hz transformers are connected to form a three-phase 460/208 V transformer bank. The equivalent impedance of each transformer referred to HV side is 1.0 + j2.0 Ω. The transformer delivers 25 kW at 0.9 pf lagging at rated voltage. Answer the following questions: (a) Draw a schematic diagram showing the transformer connection. Draw three separate single-phase transformers and complete their primary and secondary connections. (b) Determine the magnitude of transformer primary and...
A three phase 250 kVA 2400:415 V 50 Hz distribution transformer is constructed by connecting thre...
A three phase 250 kVA 2400:415 V 50 Hz distribution transformer is constructed by connecting three single phase transformers in the Dynll vector group as shown in Fig.P1. The per phase equivalent circuit parameters on the high voltage side are: R1-0.72 Ω, Xi,-0.92 Ω, R2-0.70 Ω, Xp-0.90 Ω, R.-308.49 Ω, and X,,-44.61 Ω (a) Sketch the corresponding phasor diagram of the primary and secondary voltages for the Dynll vector group; lagging; terminal voltage is 415 V line to line, and...
A 50-kVA, 13,800/208-V, Delta to Wye connected distribution transformer has an equivalent resistance of 3 percent...
A 50-kVA, 13,800/208-V, Delta to Wye connected
distribution transformer has an equivalent resistance of 3 percent
and a reactance of 9 percent per unit.
(a) what's the transformers phase impedance referred to the high
side voltage?
(b) what's the transformers voltage regulation at full load and 0.9
PF leading?
equivalent resistance of 3 percent and a reactance of 9 percent per unit. (a) What is the transformer's phase impedance referred to the high-voltage side? (b) Calculate this transformer's voltage regulation...
A single-phase transformer is rated at 10 kVA, 240/100 V. When the secondary terminals are open-circuited...
A single-phase transformer is rated at 10 kVA, 240/100 V. When the secondary terminals are open-circuited and the primary winding is supplied at normal voltage, the input current is 2.6 A at a power factor of 0.3 lag. When the secondary terminals are short-circuited, a voltage of 18 V applied to the primary causes the full-load current to flow in the secondary, the power input to the primary being 240 W. Calculate (a) the regulation (b) the efficiency of the...
A three phase power transformer of 100 (KVA), 22 / 12.7 (kV) and Δ-Y has a...
A three phase power transformer of 100 (KVA), 22 / 12.7 (kV) and Δ-Y has a resistance of 0.15 (pu) and a reactance of 0.6 (pu). The elements of the excitation branch are R_m = 100 (pu) and X_m = 20 (pu) a) If this transformer supplies a load of 80 (KVA) with an FP = 0.8 delay, draw the phasor diagram of one phase of the transformer. b) What is the voltage regulation of the transformer bank in these...
Ideal, single-phase two-winding transformer A single-phase two-winding transformer is rated 20 kVA, 480/120 V, 60 Hz...
Ideal, single-phase two-winding transformer A single-phase two-winding transformer is rated 20 kVA, 480/120 V, 60 Hz A source connected to the 480-V winding supplies an impedance load con- nected to the 120-V winding. The load absorbs 15 kVA at 0.8 p.f. lagging Ideal, single-phase two-winding transformer A single-phase two-winding transformer is rated 20 kVA, 480/120 V, 60 Hz A source connected to the 480-V winding supplies an impedance load con- nected to the 120-V winding. The load absorbs 15 kVA...
A single-phase 10 kVA, 460/120 V, 60 Hz, transformer has an efficiency of 96% when it...
A single-phase 10 kVA, 460/120 V, 60 Hz, transformer has an efficiency of 96% when it delivers 9 kW at 0.9 pf lagging. The transformer is connected as an autotransformer to supply load to a 460 V circuit from a 580 V source. Show the autotransformer connection Determine kVA rating of the autotransformer Determine the efficiency of the autotransformer at full-load with 0.9 pf lagging
A 150 KVA, 2080/208-V, 3 PHASE, delta-wye transformer with the following: RH 450m2 R 4.5m XH 2.20 Load 120 KVA, 90KW (lagging power factor) at rated terminal voltage of 208V Determine a) b) c) The approximate equivalent circuit referred to the low-voltage side The primary voltage The transformer efficiency Please show the following: Circuit with the values given & found Equations used
A 150 KVA, 2080/208-V, 3 PHASE, delta-wye transformer with the following: RH 450m2 R 4.5m XH 2.20 Load...
4. [Transformer - 15 points) A 50-kVA, 13,800/208-V, A-Y distribution transformer has an equivalent resistance of 3 percent and a reactance of 9 percent per unit. (a) What is the transformer's phase impedance referred to the high-voltage side? (b) Calculate this transformer's voltage regulation at full load and 0.9 PF leading.
A three phase 250 kVA 2400:415 V 50 Hz distribution transformer is constructed by connecting three single phase transformers in the Dynll vector group as shown in Fig.P1. The per phase equivalent circuit parameters on the high voltage side are: R1-0.72 Ω, Xi,-0.92 Ω, R2-0.70 Ω, Xp-0.90 Ω, R.-308.49 Ω, and X,,-44.61 Ω (a) Sketch the corresponding phasor diagram of the primary and secondary voltages for the Dynll vector group; lagging; terminal voltage is 415 V line to line, and...
A 50-kVA, 13,800/208-V, Delta to Wye connected
distribution transformer has an equivalent resistance of 3 percent
and a reactance of 9 percent per unit.
(a) what's the transformers phase impedance referred to the high
side voltage?
(b) what's the transformers voltage regulation at full load and 0.9
PF leading?
equivalent resistance of 3 percent and a reactance of 9 percent per unit. (a) What is the transformer's phase impedance referred to the high-voltage side? (b) Calculate this transformer's voltage regulation...
A single-phase transformer is rated at 10 kVA, 240/100 V. When the secondary terminals are open-circuited and the primary winding is supplied at normal voltage, the input current is 2.6 A at a power factor of 0.3 lag. When the secondary terminals are short-circuited, a voltage of 18 V applied to the primary causes the full-load current to flow in the secondary, the power input to the primary being 240 W. Calculate (a) the regulation (b) the efficiency of the...
Ideal, single-phase two-winding transformer A single-phase two-winding transformer is rated 20 kVA, 480/120 V, 60 Hz A source connected to the 480-V winding supplies an impedance load con- nected to the 120-V winding. The load absorbs 15 kVA at 0.8 p.f. lagging Ideal, single-phase two-winding transformer A single-phase two-winding transformer is rated 20 kVA, 480/120 V, 60 Hz A source connected to the 480-V winding supplies an impedance load con- nected to the 120-V winding. The load absorbs 15 kVA...
Most questions answered within 3 hours.
-
Arduino programming
Write the syntax for the analogWrite() function in order to
output an effective 2V...
asked 53 seconds from now -
Tartaric acid is a diprotic acid we can represent as
H2T. Suppose a 100mL solution, which...
asked 59 seconds from now -
A bacteria has a doubling period of 6 days. If there are 3300
bacteria present now,...
asked 20 minutes ago -
Determine the PH of a 0.232M mg (OH)2 solution at 25 degree
Celsius.
asked 17 minutes ago -
A certain weak base has a Kb of 8.40 × 10-7. What concentration
of this base...
asked 25 minutes ago -
A company borrowed cash from the bank and signed a 6-year note
at 6% annual interest....
asked 26 minutes ago -
A farmer is planning his spring planting. He has 20 acres on
which he can plant...
asked 45 minutes ago -
Guidelines Prepare a PowerPoint Presentation based upon a Brics
and Mitsk Country: Indonesia
This Country has...
asked 53 minutes ago -
a girl stands on the edge of a merry-go-round of radius 1.71m.
If the merry go...
asked 56 minutes ago -
A mechanic sells a brand of automobile tire that has a life
expectancy that is normally...
asked 1 hour ago -
A new prototype of sunglasses are designed to help people with
colour blindness see with better...
asked 1 hour ago -
The table to the right shows the results of a survey in which
26002600
adults from...
asked 1 hour ago