We need at least 10 more requests to produce the answer.
0 / 10 have requested this problem solution
The more requests, the faster the answer.
with reference to 3 phase motor, state with reason a) significance of the air gap in...
5. (a) State the reason(s) for using a starter to start an induction motor. b) Describe, with the aid of diagram(s), two methods for starting of a squirrel cage induction (c) The results of no-load and blocked-rotor test on a 3-phase, star-connected induction motor are as follows No-load test: Line-to-Line voltage = 380V: Input power = 1500W: Block-rotor test: Line-to-Line voltage 38V; Input power - 2.4kW Input current-15A; Friction and windage losses is 500W Input current-65A. Stator resistance between terminal...
4. A 3-phase, 340 V, Induction motor is supplied with 60 A at .85 pf lagging. Its stator and rotor copper losses are 4000 W and 800 W respectively, while its core losses are 2000 W, and its Friction, Windage and Stray losses are a combined 750 W. Determine: a. Draw a diagram depicting the energy flow in the motor (Similar to the one we had drawn in class) b The air gap power c. The mechanical power developed d....
The input power to a 480V, 3 phase, 6 pole, 50 Hz induction motor is 75kW with a line current of 75A and runs at a slip of 2.5%. If the stator core loss is 2 kW, windage and friction loss is 1.2 kW, and the stator resistance per phase is 0.16 ohm. Calculate: a. Power supplied to the rotor (Air gap power) b. Rotor copper loss c. Shaft power d. Efficiency of the motor e. Shaft torque f What...
8) The motor model for a 3-phase 480V 1750 RPM induction motor is shown below. Stray losses are 1000W. Assuming it is running at full rated load in the United States, find: 0.01 j0.14 j0.14 0 _ 0.01 A 19 j16 30.01/18 ) Synchronous Speed= RPM Number of poles= Poles Slip= Stator current iz = Amps Rotor current lz= Amps Magnetization currently = Amps Watts HP Volts Power across the air gap= h) 3-phase shaft (brake) horsepower= Terminal Voltage "V"=...
Q4. State whether the following sentences are true or false, and give the reason behind your answer. 1. Two equally rate three-phase induction and permanent magnet synchronous motors with unknown name plate data. At no load one of them draws a current of 40 A, and he second motor draws 50A. It is stated that the 50 A belongs for the induction motor. 2. Star delta starter is preferred for an induction motor coupled with a high mechanical load. 3....
A 3-phase, 208 V, 60 Hz, 30 hp, four-pole induction motor has the following equivalent circuit parameters. R1 = 0.2 Ω, , , Xm = 12Ω.The rotational loss is 500 W. For a slip of 5%, calculate (a) The motor speed in rpm and radians per sec (b) The current drawn by the motor from the power supply (c) The stator cu-loss (d) The air gap power (e) The rotor cu-loss (f) The shaft power (g)The developed torque and the shaft torque (h) The efficiency of the motor Use...
4. A 3-phase, 340 V, Induction motor is supplied with 60 A at.85 pf lagging. Its stator and rotor copper losses are 4000 W and 800 W respectively, while its core losses are 2000 W, and its Friction, Windage and Stray losses are a combined 750 W. Determine: a. Draw a diagram depicting the energy flow in the motor (Similar to the one we had drawn in class) b The air gap power c. The mechanical power developed d. The...
A three phase, 60 Hz induction motor rated at 440 V and 40 hp drives a load at 1710 rpm. The induction motor has the following impedances referred to the stator in /phase: R,=0.1512, X,=0.7512; R2=1.222,X=0.7522; X=25 12 . The core loss is 450 W and friction and windage loss is 250 W. Calculate the following 1. line current and power factor 2. Real and reactive input power 3. Air-gap power 4. Mechanical power and torque developed 5. shaft horse...
If a 3-phase induction motor is to be fed by a fixed 50 Hz supply voltage, is it possible that the induction motor operates at a speed of 4000 RPM? YES/NO? WHY?