Think Critically 7-2: Choosing a Virtual Network Configuration. You're setting up a test environment that involves two subnets with three Windows Server 2016 servers on each subnet. The servers are running broadcast-based network services, such as DHCP. The host computer is attached to the production network, so you must prevent any conflicts. You want the two subnets to be able to communicate with each other. The test environment consists of a single Windows Server 2016 machine running Hyper-V. Describe how you plan to configure the virtual network.
So as per the scenario, we need to have two subnets where in each subnet 3 windows servers are running. So lets take the IP as 192.168.10.0 series.
Subnet 1: 192.168.10.0/29
Usable host addresses: 192.168.10.1 - 192.168.10.6
Subnet 2: 192.168.10.8/29
Usable host addresses available for server: 192.168.10.9 - 192.168.10.14
For establishing a connection between these two subnets, we need a router and the default gateway of subnet 1 is 192.168.10.6 and the default gateway address of subnet 2 is 192.168.10.14. then the subnets can connect to each other and the network operations will be done.
Think Critically 7-2: Choosing a Virtual Network Configuration. You're setting up a test environment that involves...
You’re setting up a test environment that involves two subnets with three Windows Server 2016 servers on each subnet. The servers are running broadcast-based network services, such as DHCP. The host computer is attached to the production network, so you must prevent any conflicts. You want the two subnets to be able to communicate with each other. The test environment consists of a single Windows Server 2016 machine running Hyper-V. Describe how you plan to configure the virtual network.
You have a network consisting of three sites and 15 member servers. Both SiteA and SiteB have six of the member servers, and SiteC has three member servers. SiteA and SiteB are across town from each other, and SiteC is in another state. Your environment is heavily virtualized, with Hyper-V running on 4 servers each in SiteA and SiteB and a total of 24 VMs spread evenly among the servers. Each server is capable of running double the number of...
can you please help me with this homework. DCOM 101 – Introduction to Data Communications Final Project Instructions: In this Final Project, you will test the skills and knowledge gained throughout this course. The steps listed below are loosely based on the Assignments you have completed thus far, so don’t hesitate to look back and use those resources. Follow the steps in each section, and paste screenshots when prompted. This assignment is worth 10% of your final grade. Basic Network...