When a Heat Sink is used, will the power dissipated be a small or large value? Why?
When a Heat Sink is used, will the power dissipated be a small or large value?...
4.25 An aluminum heat sink (k 230 W/m - K), used to cool an array of electronic chips, consists of a square chan nel of inner width w -30 mm, through which liquid flow may be assumed to maintain a uniform surface tem perature of T 20°C. The outer width and length of the channel are W= 40 mm and L = 160 mm, respectively. Chip, T RiC Heat sink T. 2 T1 Coolant If N 120 chips attached to...
In the circuit shown in figure-8, For what value of ‘R’ is the
power dissipated in ‘R’ maximum? Calculate that power.
| 8 In the circuit shown in figure-8, For what value of 'R' is the power dissipated in 'R' maximum? Calculate that power. 362 1292 382 Figure-8
Market power is highest when: • Number of sellers is _________ (small or large) • Product is _________ (identical or different) •Barriers to entry/exit are _____ (low or high)
QUESTION 4(Total 12.5 Marks) The switch current and voltage waveforms of a power converter are shown in the next page. The switch has a maximum junction temperature, T,max140°C and a junction-to-case thermal resistance Rc 0.55°C/w (a) How much power is dissipated by the switch? Sketch the power waveform (7.5 marks) (b) The converter operates in an ambient of 25°C and the switch is mounted on a heat sink. Specify the value of thermal resistance of the heat sink, if a...
What is the average power dissipated in the lightbulb when L =
0?
The inductor is now adjusted so that L = L max. In this case
the average power dissipated in the lightbulb is one fourth the
value found in part A. What is the value of Lmax?
A Ligh-Dimmer Circuit The intensity of a light with a resistance 110 is controlled by connecting in series with an inductor whose inductance can be vied from LLL. This lighter Drois...
0 9 A MOSFET is installed on a heat sink as shown in Fig. 2. The junction-to-case thermal resistance and the case-to- sink thermal resistance of the MOSFET are 1.6°C/W and 0.5°C/W respectively. Power loss of the MOSFET is 4W. If the maximum operating temperature of the MOSFET is 60°C and the temperature of the ambient environment is 30°C, calculate the minimum thermal resistance of the heat sink Pe 2
10. For the following circuit, determine the value of R2, Power dissipated by R2 and the total power. (20pts) R1 150Ω Voc 22V DC 9VR2 R3 680Ω
Ctri fellowing problems wil refer to the description and diagram below. Heat sink Top View Square fins Heat sink Interface, Ls Heat spreader Chip You are tasked with designing the heat sink for a silicon chip (k = 50W/m·K) with a thickness of le = 3 mm and a thermal design power of Q.-130 w, meaning that at maximum operation, the heatsink must dissipate 130 W of power. In your initial design, a heat spreader of thickness 3 mm, made...
Show that the power dissipated by the load resistor is maximum when the resistance R of the load resistor is equal to the internal resistance r of the battery.
Write a C program that finds voltage drop and power dissipated by a resistance (R) when a current (I) flows through it. Resistance and current values are given as inputs. Create a function that would find the voltage drop, and create another function that would find the power. Use these functions in your program and print the voltage drop and power dissipated on the console. The input and output values are single precision floating-point values. Comment your code.