What are the characteristic parameters of transmission lines and upon what they depend?
Note: the book used is POWER SYSTEM ANALYSIS - John J. Grainger.
What are the characteristic parameters of transmission lines and upon what they depend? Note: the book...
Draw three phase and single phase electrical equivalent model of a transmission line (T and π models). Note: the book used is POWER SYSTEM ANALYSIS - John J. Grainger.
A 220-kV, 150 MVA, 60-Hz, three-phase transmission line is 140 km long with the characteristic parameters of r = 0.09 Ohm/km, x = 0.88 Ohm/km, y = 4.1 * 10^-6 s/km. Calculate the ABCD constants of this transmission line. What is the sending end voltage if the line is supplying rated voltage and apparent power at 0.85 PF lagging? What is the voltage regulation of the transmission line for the conditions in question 11. What is the efficiency of the...
Problem 2: A 345 kV, 60 Hz, three-phase characteristic parameters of the transmission line are: transmission line is 130 km long. The r= 0.036 ?/km L = 0.8 x 10-3 H/km C = 0.0112 x 10-6 F/km The receiving end load is 270 MVA with 0.8 PF lagging at 325 kV. (k) What is the total series impedance of this transmission line? (5 points) () What is the total shunt admittance of this transmission line? (5 points) (m) Calculate the...
A 220-kV, 150 MVA, 60-Hz, three-phase transmission line is 140 km long with the characteristic parameters of r = 0.09 ohm/km, x = 0.88 ohm/km, y = 4.1 * 10^-6 S/km. 10. Calculate the ABCD constants of this transmission line. 11. What is the sending end voltage if the line is supplying rated voltage and apparent power at 0.85 PF lagging? 12. What is the voltage regulation of the transmission line for the conditions in question 11. 13. What is...
A 220-kV, 150 MVA, 60-Hz, three-phase transmission line is 140 km long with the characteristic parameters of r = 0.09 Ohm/km, x = 0.88 Ohm/km, y = 4.1*10^-6 S/km. What is the sending end voltage if the line is supplying rated voltage and apparent power at 0.85 PF lagging? What is the voltage regulation of the transmission line for the conditions in question 11.
A 220-kv, 150 MVA, 60-Hz three phase transmission line is 50 km long. The characteristic parameters of the transmission line are r-0.05 2/km x-0.88 /km 1. The voltag at the reeioransmisson line is215 kV What is the suppling end voltage if the line is supplying rated voltage at unity PF? What is the voltage regulation of the transmission line? What is the efficiency of the transmission line? a. b. c.
answer number 3 and 4 Problem 7. Transmission Lines The figure below shows a transmission line with a characteristic impedance Z,-50 Ω, connected to a single frequency generator with an internal impedance R,-50 C (not shown), and terminated in a purely resistive load RL 50 2. At the frequency of the generator, the wavelength of the transmission line is λ = 2 m. At a distance dl-1.25 m away from the load, a shorted stub is connected via a tee....
(POWER SYSTEM ANALYSIS) Load + Load Figure 1. One line diagram of a three bus power transmission system. In Figure 1, the power flows in the transmission lines are to be found. In this system, 100 MVA and 154 kV are the base values. The generator bus, which is shown as Bus 1, is considered to be an infinite bus and the voltage magnitude and the angle are 1 and 0°, respectively. The voltages of Bus 2 and Bus 3...
2. Three transmission lines are connected as shown below. Note that 3) is short- circuited and it is connected in series to the tandem of transmission lines I and 2. Calculate Zin (input impedance of line) ap the input port (sinusoidal steady state mode operating at the frequency of 100 MHz)、The velocity of propagation on all lines are identical. Also, what is the value of the equivalent circuit element for Zin? 100 Zol= 100 Ω di-A Zin as-75 Ω
solve part D,E,F Assignment Description @ (Case studies & Basic calculation) Note: 3 to 4 students in a group only. The generation, delivery, and utilization of electric power and energy remain one of the most challenging and exciting fields of electrical engineering. The astounding technological developments of our age are highly dependent upon a safe, reliable, and economic supply of electric power. Describe your understanding on comprehensive coverage of the generation, transformation, transmission, distribution, and utilization of electric power. The...