Consider a cylindrical specimen of a steel alloy 8.6 mm (0.3386 in.) in diameter and 73...
Consider a cylindrical specimen of a steel alloy 8.6 mm (0.3386 in.) in diameter and 73 mm (2.874 in.) long that is pulled in tension. Determine its elongation when a load of 66800 N (15020 lbf) is applied. The tensile stress-strain behavior for this steel alloy is shown in the Animated Figure.
Homework Answers
Add Answer to:
Consider a cylindrical specimen of a steel alloy 8.6 mm (0.3386
in.) in diameter and 73...
A load of 38330 N (8617 lbf) is applied to a cylindrical specimen of a steel...
A load of 38330 N (8617 lbf) is applied to a cylindrical specimen of a steel alloy (displaying the stress-strain behavior shown in the Animated Figure 6.22 ) that has a cross-sectional diameter of 10.3 mm (0.4055 in.). If the original specimen length is 485 mm ( 19.09 in.), how much will it increase in length when this load is applied? mm [The tolerance is +/- 15%.] Strain = Stress = Strain = Stress = Stress (MPa) Stress (MPa) 100...
2) Using the stress-strain curve for a steel alloy shown in the following figure answer the...
2) Using the stress-strain curve for a steel alloy shown in the following figure answer the following questions: 600 500 400 500 400 300 300 200 200 100 100 0.000 0.002 0.006 0.004 Strain 0.00 0,04 0.08 0.12 0.16 0.20 Using the same steel alloy, consider a cylindrical specimen 15 mm in diameter pulled in tension, if a load of 85,000 N is applied: h) Calculate the approximate ductility in percent elongation, (consider the final elongation as the elongation at...
Draw a schematic stress-strain diagram for steel. Make sure you mark all the important points and regions on it
1. Draw a schematic stress-strain diagram for steel. Make sure you mark all the important points and regions on it. Provide a one-two sentence explanation for each point and region along the diagram. 2. A cylindrical specimen of a nickel alloy having an elastic modulus of 207 GPa (30 x 10* psi) and an original diameter of 10.2 mm (0.40 In.) will experience only elastic deformation when a tensile load of 8900 N (2000 Ibe) is applied. Compute the maximum length...
A bar of a steel alloy that exhibits the stress–strain behavior shown in the Animated Figure...
A bar of a steel alloy that exhibits the stress–strain behavior shown in the Animated Figure 6.22 is subjected to a tensile load; the specimen is 375 mm (14.8 in.) long and has a square cross section 5.5 mm (0.22 in.) on a side. (a) Compute the magnitude of the load necessary to produce an elongation of 1.5 mm (0.059 in.). (b) What will be the deformation after the load has been released?
Problem 7.23 Your answer is partially correct. Try again. Consider the brass alloy for which the ...
Can someone help me with this materials problem?
Problem 7.23 Your answer is partially correct. Try again. Consider the brass alloy for which the stress-strain behavior is shown in the Animated Figure 7.12. A cylindrical specimen of this material 10.1 mm (0.3976 in.) in diameter and 98.8 mm (3.890 in.) long is pulled in tension with a force of 10200 N (2293 lbr). If it ls known that this alloy has a value for Polsson's ratio of 0.35, compute (a)...
2. (70 pts) A cylindrical specimen of an alloy having a diameter of 12.8 mm and...
2. (70 pts) A cylindrical specimen of an alloy having a diameter of 12.8 mm and a gauge length of 50.800 mm is pulled in tension. The load-length data are recorded during the test and are tabulated below. After fracture, the diameter of the specimen near the fracture point was 9.5 mm. Load (N) 7,330 15,100 23,100 30,400 34,400 38,400 41,300 44.800 46,200 47,300 47,500 46,100 44,800 42,600 36,400 Length (mm) 50.800 50.851 50.902 50.952 51.003 51.054 51.308 51.816 52.832...
Chapter 06, Problem 6.50 A steel alloy specimen having a rectangular cross section of dimensions 19.0...
Chapter 06, Problem 6.50 A steel alloy specimen having a rectangular cross section of dimensions 19.0 mm x 3.2 mm (0.7480 in. x 0.1260 in.) has the stress-strain behavior shown in the Animated Figure. If this specimen is subjected to a tensile force of 100900 N (22680 lbf) then (a) Determine the amount of elastic strain induced. (b) Determine the amount of plastic strain induced. (c) If its original length is 400 mm, what will be its final length after...
ive already gotten 2 wrong answers this is my last attempt please be correct!!!!!!!!!!!!!! Incorrect Consider the brass alloy the stress-strain behavior of which is shown in the Animated Fioure...
ive already gotten 2 wrong answers this is my last attempt
please be correct!!!!!!!!!!!!!!
Incorrect Consider the brass alloy the stress-strain behavior of which is shown in the Animated Fioure 2.12. A cylindrical specimen of this alloy 15 mm in diameter and 214 mm long is to be pulled in tension Calculate the force necessary to cause 0.00788 mm reduction in diameter. Assume a value of 0.35 for Poisson's ratio. 26507.1 the tolerance is +/-2% Click if you would like...
Nitrogen from a gaseous phase is to be diffused into pure iron at 700°C. If the...
Nitrogen from a gaseous phase
is to be diffused into pure iron at 700°C. If the surface
concentration is maintained at 0.12 wt% N, what will be the
concentration (in weight percent) 3.7 mm from the surface after 8.3
h? The diffusion coefficient for nitrogen in iron at 700°C is 3.0 ×
10-10 m2/s.
Also, A cylindrical specimen of a brass alloy 10.1 mm (0.3976
in.) in diameter and 119.8 mm (4.717 in.) long is pulled in tension
with a...
rn A specimen of copper having a rectangular cross section 15.2 mm x 19.1 mm is...
rn A specimen of copper having a rectangular cross section 15.2 mm x 19.1 mm is pulled in tension with 44,500 N force, producing only elastic deformation. Calculate the resulting strain. Round off the answer to three significant figures. Answer: 1.394e-3 A cylindrical specimen of a nickel alloy having an elastic modulus of 207 GPa and an original diameter of 10.2 mm experiences only elastic deformation when a tensile load of 8900 N is applied. Compute the maximum length of...
A load of 38330 N (8617 lbf) is applied to a cylindrical specimen of a steel alloy (displaying the stress-strain behavior shown in the Animated Figure 6.22 ) that has a cross-sectional diameter of 10.3 mm (0.4055 in.). If the original specimen length is 485 mm ( 19.09 in.), how much will it increase in length when this load is applied? mm [The tolerance is +/- 15%.] Strain = Stress = Strain = Stress = Stress (MPa) Stress (MPa) 100...
2) Using the stress-strain curve for a steel alloy shown in the following figure answer the following questions: 600 500 400 500 400 300 300 200 200 100 100 0.000 0.002 0.006 0.004 Strain 0.00 0,04 0.08 0.12 0.16 0.20 Using the same steel alloy, consider a cylindrical specimen 15 mm in diameter pulled in tension, if a load of 85,000 N is applied: h) Calculate the approximate ductility in percent elongation, (consider the final elongation as the elongation at...
Can someone help me with this materials problem?
Problem 7.23 Your answer is partially correct. Try again. Consider the brass alloy for which the stress-strain behavior is shown in the Animated Figure 7.12. A cylindrical specimen of this material 10.1 mm (0.3976 in.) in diameter and 98.8 mm (3.890 in.) long is pulled in tension with a force of 10200 N (2293 lbr). If it ls known that this alloy has a value for Polsson's ratio of 0.35, compute (a)...
2. (70 pts) A cylindrical specimen of an alloy having a diameter of 12.8 mm and a gauge length of 50.800 mm is pulled in tension. The load-length data are recorded during the test and are tabulated below. After fracture, the diameter of the specimen near the fracture point was 9.5 mm. Load (N) 7,330 15,100 23,100 30,400 34,400 38,400 41,300 44.800 46,200 47,300 47,500 46,100 44,800 42,600 36,400 Length (mm) 50.800 50.851 50.902 50.952 51.003 51.054 51.308 51.816 52.832...
Chapter 06, Problem 6.50 A steel alloy specimen having a rectangular cross section of dimensions 19.0 mm x 3.2 mm (0.7480 in. x 0.1260 in.) has the stress-strain behavior shown in the Animated Figure. If this specimen is subjected to a tensile force of 100900 N (22680 lbf) then (a) Determine the amount of elastic strain induced. (b) Determine the amount of plastic strain induced. (c) If its original length is 400 mm, what will be its final length after...
ive already gotten 2 wrong answers this is my last attempt
please be correct!!!!!!!!!!!!!!
Incorrect Consider the brass alloy the stress-strain behavior of which is shown in the Animated Fioure 2.12. A cylindrical specimen of this alloy 15 mm in diameter and 214 mm long is to be pulled in tension Calculate the force necessary to cause 0.00788 mm reduction in diameter. Assume a value of 0.35 for Poisson's ratio. 26507.1 the tolerance is +/-2% Click if you would like...
Nitrogen from a gaseous phase
is to be diffused into pure iron at 700°C. If the surface
concentration is maintained at 0.12 wt% N, what will be the
concentration (in weight percent) 3.7 mm from the surface after 8.3
h? The diffusion coefficient for nitrogen in iron at 700°C is 3.0 ×
10-10 m2/s.
Also, A cylindrical specimen of a brass alloy 10.1 mm (0.3976
in.) in diameter and 119.8 mm (4.717 in.) long is pulled in tension
with a...
rn A specimen of copper having a rectangular cross section 15.2 mm x 19.1 mm is pulled in tension with 44,500 N force, producing only elastic deformation. Calculate the resulting strain. Round off the answer to three significant figures. Answer: 1.394e-3 A cylindrical specimen of a nickel alloy having an elastic modulus of 207 GPa and an original diameter of 10.2 mm experiences only elastic deformation when a tensile load of 8900 N is applied. Compute the maximum length of...
Most questions answered within 3 hours.
-
2) You are given the task of finding a representation for a
circle in a drawing...
asked 38 minutes ago -
STUDY QUESTION: Does use of diet drug fen-phen
(fenfluramine-phentermine) cause valvular heart disease?
HINT: Valvular heart...
asked 29 minutes ago -
1. An object weighing 40 N rests on a surface. The coefficient
of friction is 0.35....
asked 1 hour ago -
Investor company owns 35% of investee company voting stock and
accounts for the investment under the...
asked 2 hours ago -
The number of major faults on a randomly chosen 1 km stretch of
highway has a...
asked 3 hours ago -
Consider the competitive environment of Starbuck's, Progressive
Insurance, a manufacturing firm with low turnover, or a...
asked 4 hours ago -
3. Gains from trade
Consider two neighbouring island countries called Euphoria and
Contente. They each have...
asked 5 hours ago -
A business executive has the option to invest money in two
plans: Plan A guarantees that...
asked 8 hours ago -
Hello, can someone please help me answer this question?
How much heat is absorbed by a...
asked 8 hours ago -
. A marketing researcher conducted a survey of 25 shoppers
randomly selected at the local mall...
asked 8 hours ago -
Create an comprehensive response to the
following:
Antimicrobial agents work on a multitude of microbes (bacteria,...
asked 8 hours ago -
6.13 LAB: Step counter. Section 6.3.
A pedometer treats walking 2,000 steps as walking 1 mile....
asked 8 hours ago