We have a solenoid made of brass with 50 turns/m . The diameter of the wire is 2 mm and when we stretch it its length is 15 m. What is the value of the magnetic field inside, in the center, when we apply a 6V DC voltage at its ends?
Note: This is all I am given!
Please note the resistivity of brass varies from 0.6x10-7-0.9x10-7 ohm.m depending on the copper in the brass.
We have a solenoid made of brass with 50 turns/m . The diameter of the wire...
we have a solenoid made of stainless steel with 50 turns/m the diameter of the wire is 2 mm and when we stretch it its length is 10m . what is the value of the magnetic field inside in the center when we apply a 5v DC voltage at its ends?
A solenoid is made from wire of resistivity ρ= 1.72 10 ^-8 m Ω⋅ and diameter 0.8 mm that is wrapped into 200 loops of 4 cm diameter. The solenoid is 8 cm long. If an emf of 12 V is connected to the ends of the wire, what is the magnetic field that this solenoid produces? Determine the length of wire and calculate the resistance in the wire. R= ρ L/A Calculate the current in the solenoid. Calculate the...
A long solenoid consists of 1900 turns and has a length of 0.65 m. The current in the wire is 0.41 A. What is the magnitude of the magnetic field inside the solenoid? Submit Answer Tries 0/10 A small diameter, 61 cm long solenoid has 248 turns and is connected in series with a resistor and battery. The size of the magnetic field inside the solenoid is 2.424E-4 T when a voltage of 65.0 V is applied to the circuit....
A)A solenoid is made of 3000 turns of copper wire. The length of the coil is 35.0cm. It is connected to a power supply which provides a current of 5.00A. What is the magnitude of the B-field created inside the solenoid. B) The solenoid coil is twisted to make a toroid of radius 10.0cm. Determine the magnetic field magnitude inside the coils of the toroid.
a) what is the resistance of the wire in the solenoid? b) how much voltage would need to be applied to the solenoid to create a 5.00 mT magnetic field? Consider a solenoid made of copper wire. The solenoid is 5.00 cm in diameter and 30.0 cm in length. The copper wire has a diameter of 0.50 mm and is wound with 20 turns per cm. The resistivity of Cu is 1.72 Times 10-8 Ohm *m.
A solenoid of length 0.796 m and radius 2.00 cm has 244 turns of wire. What is the magnitude of the magnetic field well inside the solenoid when there is a current of 9.30 A in the wire? mT
A solenoid with 500 turns of wire per cm carries a current of 0.5A. It has a length of 20.0cm and a diameter of 1.0cm. (Please show equations used) a. What is the magnitude of the magnetic field inside the solenoid? b. What is the magnetic flux in the center of the solenoid through a plane lying perpendicular to the long axis of the solenoid? c. What is the magnetic flux through a plane that contains the long axis of...
A solenoid made of magnet wire (#20 gauge) with 12.3 turns per cm is attached to a 536 Ω resistor and a 110 V DC source. The diameter of the solenoid is 1.8 cm and its length is 15 cm a. (5 points) What is the self-inductance of the solenoid? b. (5 points) The emf induced in the solenoid depends on a changing current. After a long time the current will stop changing, and the only voltage drop in the...
You have 10 m of 0.46 mm -diameter copper wire and a battery capable of passing 14 A through the wire. What magnetic field strength could you obtain inside a 2.8cm -diameter solenoid wound with the wire as closely spaced as possible? What magnetic field strength could you obtain at the center of a single circular loop made from the wire?
Please answer all parts! Thanks. I. It is desired to construct a solenoid that will have a resistance of 6.00 Ω at 20°C and produce a magnetic field of 4.00 × 102 T at its center when it cames a current of 3.40 A. The solenoid is to be constructed from copper wire having a diameter of 0.500 mm. If the radius of the solenoid is to be 1.00 cm, determine the following. (The resistivity of copper at 20°C is...